journal article·2022-08-29Open access

Development of an Innovative Soft Piezoresistive Biomaterial Based on the Interconnection of Elastomeric PDMS Networks and Electrically-Conductive PEDOT:PSS Sponges

Maria Antonia Cassa, Martina Maselli, Alice Zoso, Valeria Chiono, Letizia Fracchia, Chiara Ceresa, Gianluca Ciardelli, Matteo Cianchetti, Irene Carmagnola

Abstract

A deeply interconnected flexible transducer of polydimethylsiloxane (PDMS) and poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) was obtained as a material for the application of soft robotics. Firstly, transducers were developed by crosslinking PEDOT:PSS with 3-glycidyloxypropryl-trimethoxysilane (GPTMS) (1, 2 and 3% v/v) and using freeze-drying to obtain porous sponges. The PEDOT:PSS sponges were morphologically characterized, showing porosities mainly between 200 and 600 µm2; such surface area dimensions tend to decrease with increasing degrees of crosslinking. A stability test confirmed a good endurance for up to 28 days for the higher concentrations of the crosslinker tested. Consecutively, the sponges were electromechanically characterized, showing a repeatable and linear resistance variation by the pressure triggers within the limits of their working range (∆RR0 max = 80% for 1–2% v/v of GPTMS). The sponges containing 1% v/v of GPTMS were intertwined with a silicon elastomer to increase their elasticity and water stability. The flexible transducer obtained with this method exhibited moderately lower sensibility and repeatability than the PEDOT:PSS sponges, but the piezoresistive response remained stable under mechanical compression. Furthermore, the transducer displayed a linear behavior when stressed within the limits of its working range. Therefore, it is still valid for pressure sensing and contact detection applications. Lastly, the flexible transducer was submitted to preliminary biological tests that indicate a potential for safe, in vivo sensing applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy

Polito BIOMed Lab, Politecnico di Torino, Corso Castelfidardo 30/a, 10129 Torino, Italy

The BioRobotics Institute, Scuola Superiore Sant’Anna, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy

Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Piazza Martiri della Libertà 33, 56127 Pisa, Italy

Institute for Chemical and Physical Processes (CNR-IPCF), National Research Council, 56124 Pisa, Italy

Department of Pharmaceutical Sciences, Università del Piemonte Orientale “A. Avogadro”, Largo Donegani 2, 28100 Novara, Italy

References (57)

Show source-provided references
2. Bio-inspired soft robotics: Material selection, actuation, and design10.1016/j.eml.2018.05.003 ↗
3. Biomedical applications of soft robotics10.1038/s41578-018-0022-y ↗
4. Emerging technologies of Flexible Pressure Sensors: Materials, modelling, devices and manufacturing10.1002/adfm.201808509 ↗
5. Green and stable piezoresistive pressure sensor based on lignin-silver hybrid nanoparticles/polyvinyl alcohol hydrogel10.1016/j.ijbiomac.2021.02.055 ↗
6. Erfkamp, J., Guenther, M., and Gerlach, G. (2019). Enzyme-Functionalized Piezoresistive Hydrogel Biosensors for the Detection of Urea. Sensors, 19.10.3390/s19132858 ↗
7. Customization of Conductive Elastomer Based on PVA/PEI for Stretchable Sensors10.1002/smll.201904758 ↗
8. Wearable, Washable, and Highly Sensitive Piezoresistive Pressure Sensor Based on a 3D Sponge Network for Real-Time Monitoring Human Body Activities10.1021/acsami.1c09975 ↗
9. A bioinspired porous-designed hydrogel@polyurethane sponge piezoresistive sensor for human–machine interfacing10.1039/D1NR05017F ↗
10. An interlocked flexible piezoresistive sensor with 3D micropyramidal structures for electronic skin applications10.1039/C8SM00897C ↗
11. Vascular Pressure–Flow Measurement Using CB-PDMS Flexible Strain Sensor10.1109/TBCAS.2019.2946519 ↗
12. Poly(vinyl alcohol)/phosphoric acid gel electrolyte@polydimethylsiloxane sponge for piezoresistive pressure sensors10.1039/D1TB01467F ↗
13. Enhanced conductivity behavior of polydimethylsiloxane (PDMS) hybrid composites containing exfoliated graphite nanoplatelets and carbon nanotubes10.1016/j.compositesb.2013.10.039 ↗
14. A representative and comprehensive review of the electrical and thermal properties of polymer composites with carbon nanotube and other nanoparticle fillers10.1002/pi.5378 ↗
15. High-performance stretchable conductive nanocomposites: Materials, processes, and device applications10.1039/C8CS00706C ↗
16. Highly stretchable strain sensor based on SWCNTs/CB synergistic conductive network for wearable human-activity monitoring and recognition10.1088/1361-665X/aa79c3 ↗
17. Thermoplastic Elastomer Systems Containing Carbon Nanofibers as Soft Piezoresistive Sensors10.1021/acsomega.8b01740 ↗
18. Flexible strain sensors fabricated using carbon-based nanomaterials: A review10.1016/j.cossms.2018.11.001 ↗
19. Chandrasekhar, P. (2018). Microwave-and Conductivity-Based Technologies. Conducting Polymers, Fundamentals and Applications, Springer.10.1007/978-3-319-69378-1_40 ↗
20. ChemInform Abstract: “Synthetic Metals”: A Novel Role for Organic Polymers (Nobel Lecture)10.1002/1521-3773(20010716)40:14<2581::AID-ANIE2581>3.0.CO;2-2 ↗
21. Electrically conductive nanofibers with highly oriented structures and their potential application in skeletal muscle tissue engineering10.1016/j.actbio.2012.10.024 ↗
22. Polyaniline-polycaprolactone blended nanofibers for neural cell culture10.1016/j.eurpolymj.2019.04.048 ↗
23. Polypyrrole-based conducting polymers and interactions with biological tissues10.1098/rsif.2006.0141 ↗
24. Conductive polymers for stretchable supercapacitors10.1007/s12274-019-2296-9 ↗
25. Electrically conductive polymer composites for smart flexible strain sensors: A critical review10.1039/C8TC04079F ↗
26. Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)10.1039/b417803n ↗
27. Mechanisms for doped PEDOT:PSS electrical conductivity improvement10.1039/D1MA00290B ↗
28. A simple strategy for high stretchable, flexible and conductive polymer films based on PEDOT:PSS-PDMS blends10.1016/j.orgel.2019.105451 ↗
29. Wang, Q., Tang, N., Zhang, M., Xue, Q., and Duan, X. (2018, January 28–31). Highly Sensitive Protein Detection Using Conductive Polymer Nanowires Fabricated by Nanoscale Soft Lithography. Proceedings of the 2018 IEEE Sensors, New Delhi, India.10.1109/ICSENS.2018.8589656 ↗
30. A stretchable conductive Polypyrrole Polydimethylsiloxane device fabricated by simple soft lithography and oxygen plasma treatment10.1007/s10544-018-0273-9 ↗
31. Conductive nanomaterials for 2D and 3D printed flexible electronics10.1039/C8CS00738A ↗
32. Verpoorten, E., Massaglia, G., Ciardelli, G., Pirri, C.F., and Quaglio, M. (2020). Design and Optimization of Piezoresistive PEO/PEDOT:PSS Electrospun Nanofibers for Wearable Flex Sensors. Nanomaterials, 10.10.3390/nano10112166 ↗
33. Miniaturized Flexible Piezoresistive Pressure Sensors: Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Copolymers Blended with Graphene Oxide for Biomedical Applications10.1021/acsami.9b10575 ↗
34. Highly conductive and stretchable poly(dimethylsiloxane):poly(3,4- ethylenedioxythiophene):poly(styrene sulfonic acid) blends for organic interconnects10.1039/C3RA46087H ↗
35. Tseghai, G.B., Malengier, B., Fante, K.A., Nigusse, A.B., and Van Langenhove, L. (2020). Development of a Flex and Stretchy Conductive Cotton Fabric via Flat Screen Printing of PEDOT:PSS/PDMS Conductive Polymer Composite. Sensors, 20.10.3390/s20061742 ↗
36. Ceresa, C., Tessarolo, F., Maniglio, D., Tambone, E., Carmagnola, I., Fedeli, E., Caola, I., Nollo, G., Chiono, V., and Allegrone, G. (2019). Medical-grade silicone coated with rhamnolipid R89 is effective against Staphylococcus spp. Biofilms. Molecules, 24.10.3390/molecules24213843 ↗
37. Crosslinked gelatin nanofibres: Preparation, characterisation and in vitro studies using glial-like cells10.1016/j.msec.2013.02.039 ↗
38. Highly porous scaffolds of PEDOT:PSS for bone tissue engineering10.1016/j.actbio.2017.08.045 ↗
39. 3D conducting polymer platforms for electrical control of protein conformation and cellular functions10.1039/C5TB00390C ↗
40. Electrical stimulation as a novel tool for regulating cell behavior in tissue engineering10.1186/s40824-019-0176-8 ↗
41. Electrical stimulation in bone tissue engineering treatments10.1007/s00068-020-01324-1 ↗
42. Cross-linked PEDOT: PSS as an alternative for low-cost solution-processed electronic devices10.1016/j.synthmet.2018.04.002 ↗
43. Trends in the design of nerve guidance channels in peripheral nerve tissue engineering10.1016/j.pneurobio.2015.06.001 ↗
44. The effect of electrospun gelatin fibers alignment on schwann cell and axon behavior and organization in the perspective of artificial nerve design10.3390/ijms160612925 ↗
45. Nerve guidance conduits based on bi-layer chitosan membranes for peripheral nerve regeneration10.4081/bse.2016.12 ↗
46. Large strain hysteresis and mullins effect of tough double-network hydrogels10.1021/ma062924y ↗
47. A review on the Mullins effect10.1016/j.eurpolymj.2008.11.017 ↗
48. Hur, O.-N., Ha, J.-H., and Park, S.-H. (2020). Strain-sensing properties of multi-walled carbon nanotube/polydimethylsiloxane composites with different aspect ratio and filler contents. Materials, 13.10.3390/ma13112431 ↗
49. Model-based compensation of rate-dependent hysteresis in a piezoresistive strain sensor10.1109/TIE.2018.2884204 ↗
50. Kim, J.-S., and Kim, G.-W. (2017). Hysteresis compensation of piezoresistive carbon nanotube/polydimethylsiloxane composite-based force sensors. Sensors, 17.10.3390/s17020229 ↗
51. (2009). Biological Evaluation of medical devices—Part 5: Tests for in vitro cytotoxicity (Standard No. Standard N. 10993).
52. Miriani, R.M., Abidian, M.R., and Kipke, D.R. (2008, January 20–25). Cytotoxic analysis of the conducting polymer PEDOT using myocytes. Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vancouver, BC, Canada.10.1109/IEMBS.2008.4649538 ↗
53. Development of 3D printable conductive hydrogel with crystallized PEDOT: PSS for neural tissue engineering10.1016/j.msec.2019.02.008 ↗
54. Biocompatibility of a PDMS-coated micro-device: Bladder volume monitoring sensor10.1007/s10118-012-1119-1 ↗
55. Sreekantan, S., Hassan, M., Murthe, S.S., and Seeni, A. (2020). Biocompatibility and Cytotoxicity Study of Polydimethylsiloxane (PDMS) and Palm Oil Fuel Ash (POFA) sustainable super-hydrophobic coating for biomedical applications. Polymers, 12.10.3390/polym12123034 ↗
56. Biodeterioration of medical-grade silicone rubber used for voice prostheses: A SEM study10.1016/0142-9612(93)90149-V ↗
57. Inhibition of Candida albicans adhesion on medical-grade silicone by a Lactobacillus-derived biosurfactant10.1111/jam.12760 ↗