journal article·2023-12-03Open access

Model-Based Design to Enhance Neotissue Formation in Additively Manufactured Calcium-Phosphate-Based Scaffolds

Bingbing Liang, Ehsan Sadeghian Dehkord, Dorien Van Hede, Mojtaba Barzegari, Bruno Verlée, Justine Pirson, Grégory Nolens, France Lambert, Liesbet Geris

Journal of Functional Biomaterials· Volume 14· Issue 12

Abstract

In biomaterial-based bone tissue engineering, optimizing scaffold structure and composition remains an active field of research. Additive manufacturing has enabled the production of custom designs in a variety of materials. This study aims to improve the design of calcium-phosphate-based additively manufactured scaffolds, the material of choice in oral bone regeneration, by using a combination of in silico and in vitro tools. Computer models are increasingly used to assist in design optimization by providing a rational way of merging different requirements into a single design. The starting point for this study was an in-house developed in silico model describing the in vitro formation of neotissue, i.e., cells and the extracellular matrix they produced. The level set method was applied to simulate the interface between the neotissue and the void space inside the scaffold pores. In order to calibrate the model, a custom disk-shaped scaffold was produced with prismatic canals of different geometries (circle, hexagon, square, triangle) and inner diameters (0.5 mm, 0.7 mm, 1 mm, 2 mm). The disks were produced with three biomaterials (hydroxyapatite, tricalcium phosphate, and a blend of both). After seeding with skeletal progenitor cells and a cell culture for up to 21 days, the extent of neotissue growth in the disks’ canals was analyzed using fluorescence microscopy. The results clearly demonstrated that in the presence of calcium-phosphate-based materials, the curvature-based growth principle was maintained. Bayesian optimization was used to determine the model parameters for the different biomaterials used. Subsequently, the calibrated model was used to predict neotissue growth in a 3D gyroid structure. The predicted results were in line with the experimentally obtained ones, demonstrating the potential of the calibrated model to be used as a tool in the design and optimization of 3D-printed calcium-phosphate-based biomaterials for bone regeneration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomechanics Research Unit, GIGA In Silico Medicine, University of Liège, 4000 Liège, Belgium

Prometheus, The R&D Division for Skeletal Tissue Engineering, KU Leuven, 3000 Leuven, Belgium

Department of Periodontology Oral Surgery and Implant Surgery, Faculty of Medicine, University Hospital of Liège, 4000 Liège, Belgium

Dental Biomaterials Research Unit, Faculty of Medicine, University of Liège, 4000 Liège, Belgium

Biomechanics Section, Department of Mechanical Engineering, KU Leuven, 3000 Leuven, Belgium

Department of Additive Manufacturing, Sirris Liège, 4100 Seraing, Belgium

Wishbone SA, 4400 Flemalle, Belgium

Faculty of Medicine, University of Namur, 5000 Namur, Belgium

Funding

Walloon Region (SPW Recherche) · Win2Wal project B2Bone · Fund for Scientific Research Belgium FNRS-FRFC · Interreg VA Flanders—The Netherlands project Prosperos · European Union

References (56)

Show source-provided references
1. Autograft, Allograft, and Bone Graft Substitutes: Clinical Evidence and Indications for Use in the Setting of Orthopaedic Trauma Surgery10.1097/BOT.0000000000001420 ↗
2. Autologous Bone Graft: Is It Still the Gold Standard?10.1016/j.injury.2021.01.043 ↗
3. (2023, October 30). Bone|Definition, Anatomy, & Composition|Britannica. Available online: https://www.britannica.com/science/bone-anatomy.
4. Calcium Metabolism in Health and Disease10.2215/CJN.05910809 ↗
5. Group III Metabotropic Glutamate Receptor Activation Inhibits Ca2+ Influx and Nitric Oxide Synthase Activity in Bone Marrow Stromal Cells10.1002/jcp.20353 ↗
6. MAP Kinase and Calcium Signaling Mediate Fluid Flow-induced Human Mesenchymal Stem Cell Proliferation10.1152/ajpcell.00082.2005 ↗
7. Hou, X.-D., Zhang, L., Zhou, Z., Luo, X., Wang, T.-L., Zhao, X.-Y., Lu, B.-Q., Chen, F., and Zheng, L. (2022). Calcium Phosphate-based Biomaterials for Bone Repair. J. Funct. Biomater., 13.10.3390/jfb13040187 ↗
8. Additive Manufacturing of Material Scaffolds for Bone Regeneration: Toward Application in the Clinics10.1002/adfm.202006967 ↗
9. Lin, K., Sheikh, R., Romanazzo, S., and Roohani, I. (2019). 3D Printing of Bioceramic Scaffolds—Barriers to the Clinical Translation: From Promise to Reality, and Future Perspectives. Materials, 12.10.3390/ma12172660 ↗
10. 3d-printed Synthetic Hydroxyapatite Scaffold with in silico Optimized Macrostructure Enhances Bone Formation in vivo10.1002/adfm.202105002 ↗
11. Gaussian Curvature–driven Direction of Cell Fate Toward Osteogenesis with Triply Periodic Minimal Surface Scaffolds10.1073/pnas.2206684119 ↗
12. Li, Y., Liu, J., Zhong, C., Zhao, C.C., Shen, J., Chen, H., Ye, M., Zhou, J., Yang, X., and Gou, Z. (2023). The Design of Strut/tpms-based Pore Geometries in Bioceramic Scaffolds Guiding Osteogenesis and Angiogenesis in Bone Regeneration. Mater. Today Bio, 20.10.1016/j.mtbio.2023.100667 ↗
13. Computational Modeling of Bone Fracture Non-unions: Four Clinically Relevant Case Studies10.1186/s40482-015-0004-x ↗
14. Perier-Metz, C., Duda, G.N., and Checa, S. (2020). Mechano-biological Computer Model of Scaffold-supported Bone Regeneration: Effect of Bone Graft and Scaffold Structure on Large Bone Defect Tissue Patterning. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.585799 ↗
15. Simulation of Angiogenesis and Cell Differentiation in a Cap Scaffold Subjected to Compressive Strains Using a Lattice Modeling Approach10.1016/j.biomaterials.2009.11.063 ↗
16. A Dynamical Study of the Mechanical Stimuli and Tissue Differentiation Within a Cap Scaffold Based on Micro-ct Finite Element Models10.1007/s10237-010-0256-0 ↗
17. Bioresorbable Scaffolds for Bone Tissue Engineering: Optimal Design, Fabrication, Mechanical Testing and Scale-size Effects Analysis10.1016/j.medengphy.2015.01.004 ↗
18. Optimization of Scaffold Design for Bone Tissue Engineering: A Computational and Experimental Study10.1016/j.medengphy.2014.02.010 ↗
19. Curvature in Biological Systems: Its Quantification, Emergence, and Implications Across the Scales10.1002/adma.202206110 ↗
20. The Effect of Geometry on Three-dimensional Tissue Growth10.1098/rsif.2008.0064 ↗
21. Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds10.1002/adhm.201200159 ↗
22. A Computational Model for Cell/ecm Growth on 3D Surfaces Using the Level Set Method: A Bone Tissue Engineering Case Study10.1007/s10237-014-0577-5 ↗
23. Modeling the Effect of Curvature on the Collective Behavior of Cells Growing New Tissue10.1016/j.bpj.2016.11.3203 ↗
24. Blanquer, S., Werner, M., Hannula, M., Sharifi, S., Lajoinie, G., Eglin, D., Hyttinen, J., Poot, A.A., and Grijpma, D.W. (2017). Surface Curvature in Triply-periodic Minimal Surface Architectures as a Distinct Design Parameter in Preparing Advanced Tissue Engineering Scaffolds. Biofabrication, 9.10.1088/1758-5090/aa6553 ↗
25. Cell Proliferation and Migration Explain Pore Bridging Dynamics in 3D Printed Scaffolds of Different Pore Size10.1016/j.actbio.2020.07.010 ↗
26. Bidan, C.M., Kommareddy, K.P., Rumpler, M., Kollmannsberger, P., Bréchet, Y.J.M., Fratzl, P., and Dunlop, J.W.C. (2012). How Linear Tension Converts to Curvature: Geometric Control of Bone Tissue Growth. PLoS ONE, 7.10.1371/journal.pone.0036336 ↗
27. Fronts Propagating with Curvature-dependent Speed: Algorithms Based on Hamilton-jacobi Formulations10.1016/0021-9991(88)90002-2 ↗
28. New development in FREEfem++
29. Ribes, A., and Caremoli, C. (2007, January 24–27). Salomé platform component model for numerical simulation. Proceedings of the 31st Annual International Computer Software and Applications Conference (COMPSAC 2007), Beijing, China.10.1109/COMPSAC.2007.185 ↗
30. Computation of the signed distance function to a discrete contour on adapted triangulation10.1007/s10092-011-0051-z ↗
31. Polyanin, A.D., Zaitsev, V.F., and Moussiaux, A. (2001). Handbook of First-Order Partial Differential Equations, CRC Press.10.1201/b16828 ↗
32. Sørevik, T., Manne, F., Gebremedhin, A.H., and Moe, R. (2000). Applied Parallel Computing. New Paradigms for HPC in Industry and Academia, Springer. PARA 2000. Lecture Notes in Computer Science.10.1007/3-540-70734-4 ↗
33. Ahrens, J., Geveci, B., and Law, C. (2005). The Visualization Handbook, Elsevier.
34. Mockus, J. (2012). Bayesian approach to global optimization: Theory and applications. Springer Sci. Bus. Media, 37.
35. Additive Manufacturing of Biocompatible Ceramics
36. Sintering of calcium phosphate bioceramics10.1016/j.actbio.2012.11.029 ↗
37. Bouakaz, I., Sadeghian Dehkord, E., Meille, S., Schrijnemakers, A., Boschini, F., Preux, N., Hocquet, S., Geris, L., Nolens, G., and Grossin, D. (2023). 3D printed triply periodic minimal surfaces calcium phosphate bone substitute: The effect of porosity design on mechanical properties. Ceram. Interntl.10.1016/j.ceramint.2023.10.238 ↗
38. An Open Source Crash Course on Parameter Estimation of Computational Models Using a Bayesian Optimization Approach10.21105/jose.00089 ↗
39. Maximizing Neotissue Growth Kinetics in a Perfusion Bioreactor: An in silico Strategy Using Model Reduction and Bayesian Optimization10.1002/bit.26500 ↗
40. Combining microCT-based characterization with empirical modelling as a robust screening approach for the design of optimized CaP-containing scaffolds for progenitor cell-mediated bone formation10.1016/j.actbio.2016.02.037 ↗
41. Two stages in three-dimensional in vitro growth of tissue generated by osteoblastlike cells10.1116/1.3431524 ↗
42. The Effect of Pore Geometry on the in vitro Biological Behavior of Human Periosteum-derived Cells Seeded on Selective Laser-melted Ti6al4v Bone Scaffolds10.1016/j.actbio.2012.04.001 ↗
43. Osteoblastic Differentiation of Periodontal Ligament Stem Cells on Non-stoichiometric Calcium Phosphate and Titanium Surfaces10.1002/jbm.a.36044 ↗
44. Cun, X., and Hosta-Rigau, L. (2020). Topography: A Biophysical Approach to Direct the Fate of Mesenchymal Stem Cells in Tissue Engineering Applications. Nanomaterials, 10.10.3390/nano10102070 ↗
45. Jeong, J., Kim, J.H., Shim, J.H., Hwang, N.S., Heo, C.Y., and Heo, C.Y. (2019). Bioactive Calcium Phosphate Materials and Applications in Bone Regeneration. Biomater. Res., 23.10.1186/s40824-018-0149-3 ↗
46. Additive Manufacturing Approaches for Hydroxyapatite-reinforced Composites10.1002/adfm.201903055 ↗
47. Bone Regeneration with Hydroxyapatite-based Biomaterials10.1007/s42247-019-00063-3 ↗
48. Tavoni, M., Dapporto, M., Tampieri, A., and Sprio, S. (2021). Bioactive Calcium Phosphate-based Composites for Bone Regeneration. J. Compos. Sci., 5.10.3390/jcs5090227 ↗
49. Han, Y., Wei, Q., Chang, P., Hu, K., Okoro, O.V., Shavandi, A., and Nie, L. (2021). Three-dimensional Printing of Hydroxyapatite Composites for Biomedical Application. Crystals, 11.10.3390/cryst11040353 ↗
50. Yazdanpanah, Z., Johnston, G.D., Cooper, D.M.L., and Chen, X. (2022). 3D Bioprinted Scaffolds for Bone Tissue Engineering: State-of-the-art and Emerging Technologies. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.824156 ↗
51. Nik Md Noordin Kahar, N.N.F., Ahmad, N., Jaafar, M., Yahaya, B.H., Sulaiman, A.R., and Abdul Hamid, Z.A. (2022). A Review of Bioceramics Scaffolds for Bone Defects in Different Types of Animal Models: HA and Β -TCP. Biomed. Phys. Eng. Express, 8.10.1088/2057-1976/ac867f ↗
52. Emergent Collective Organization of Bone Cells in Complex Curvature Fields10.1038/s41467-023-36436-w ↗
53. Callens, S.J.P., Uyttendaele, R.J.C., Fratila-Apachitei, L.E., and Zadpoor, A.A. (2020). Substrate Curvature as a Cue to Guide Spatiotemporal Cell and Tissue Organization. Biomaterials, 232.10.1016/j.biomaterials.2019.119739 ↗
54. Superiority of Triply Periodic Minimal Surface Gyroid Structure to Strut-based Grid Structure in Both Strength and Bone Regeneration10.1021/acsami.3c06263 ↗
55. Effect of Surface Curvature on the Mechanical and Mass-transport Properties of Additively Manufactured Tissue Scaffolds with Minimal Surfaces10.1021/acsbiomaterials.1c01438 ↗
56. Pires, T.H.V., Dunlop, J.W.C., Castro, A.P.G., and Fernandes, P.R. (2022). Wall Shear Stress Analysis and Optimization in Tissue Engineering TPMS Scaffolds. Materials, 15.10.3390/ma15207375 ↗