In Vitro Degradation and Photoactivated Antibacterial Activity of a Hemin-CaP Microsphere-Loaded Coating on Pure Magnesium
Source abstract
Abstract
Photoactivated sterilization has received more attention in dealing with implant-associated infections due to its advantages of rapid and effective bacteriostasis and broad-spectrum antibacterial activity. Herein, a micro-arc oxidation (MAO)/polymethyltrimethoxysilane (PMTMS)@hemin-induced calcium-bearing phosphate microsphere (Hemin-CaP) coating was prepared on pure magnesium (Mg) via MAO processing and dipping treatments. The morphology and composition of the coating were characterized via scanning electron microscopy, Fourier transform infrared spectrometer, X-ray diffractometer and X-ray photoelectron spectrometer. Corrosion behavior was evaluated through electrochemical and hydrogen evolution tests. The release of Fe3+ ions at different immersion times was measured with an atomic absorption spectrophotometer. Antibacterial performance and cytotoxicity were assessed using the spread plate method, MTT assay and live/dead staining experiment. The results showed that the corrosion current density of the MAO/PMTMS@(Hemin-CaP) coating (4.41 × 10−8 A·cm−2) was decreased by two orders of magnitude compared to that of pure Mg (3.12 × 10−6 A·cm−2). Photoactivated antibacterial efficiencies of the Hemin-CaP microspheres and MAO/PMTMS@(Hemin-CaP) coating reached about 99% and 92%, respectively, which we attributed to the photothermal and photodynamic properties of hemin with a porphyrin ring. Moreover, based on the release of Fe3+ ions, the MC3T3-E1 pre-osteoblasts’ viability reached up to 125% after a 72 h culture, indicating a positive effect of the coating in promoting cell growth. Thus, this novel composite coating holds a promising application as bone implants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Magnesium Alloys: Properties and Applications · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering, Shandong University of Science and Technology, Qingdao 266590, China
College of Pharmaceutical Sciences, Soochow University, Suzhou 215123, China
School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450002, China
Funding
National Natural Science Foundation of China · Shandong Provincial Natural Science Foundation
References (77)
Show source-provided references
1. Osteogenic and pH stimuli-responsive self-healing coating on biomedical Mg-1Ca alloy10.1016/j.actbio.2019.05.027 ↗
2. Corrosion resistance of bioinspired DNA-induced Ca–P coating on biodegradable magnesium alloy10.1016/j.jma.2019.01.004 ↗
3. Advances in bioorganic molecules inspired degradation and surface modifications on Mg and its alloys10.1016/j.jma.2022.02.005 ↗
4. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
5. Magnesium and its alloys as orthopedic biomaterials: A review10.1016/j.biomaterials.2005.10.003 ↗
6. In vitro antibacterial properties of magnesium metal against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus10.1016/j.actbio.2009.10.007 ↗
7. Magnesium alloy AZ91 exhibits antimicrobial properties in vitro but not in vivo10.1002/jbm.b.33839 ↗
8. Zhang, R.F., Zhang, Z.Y., Zhu, Y.Y., Zhao, R.F., Zhang, S.F., Shi, X.T., Li, G.Q., Chen, Z.Y., and Zhao, Y. (2020). Degradation resistance and in vitro cytocompatibility of iron-containing coatings developed on WE43 magnesium alloy by micro-arc oxidation. Coatings, 10.10.3390/coatings10111138 ↗
9. Duty cycle influence on the corrosion behavior of coatings created by plasma electrolytic oxidation on AZ31B magnesium alloy in simulated body fluid10.1016/j.corcom.2021.09.005 ↗
10. Electrophoretic deposition and characterization of chitosan/bioactive glass composite coatings on Mg alloy substrates10.1016/j.electacta.2017.02.081 ↗
11. Dextran-caffeic acid/tetraaniline composite coatings for simultaneous improvement of cytocompatibility and corrosion resistance of magnesium alloy10.1016/j.porgcoat.2020.105928 ↗
12. In vitro corrosion resistance of layer-by-layer assembled polyacrylic acid multilayers induced Ca-P coating on magnesium alloy AZ31
13. Advances in layer-by-layer self-assembled coatings upon biodegradable magnesium alloys10.1007/s40843-020-1661-1 ↗
14. Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites10.1016/j.cej.2021.132449 ↗
15. Enhanced corrosion resistance via phosphate conversion coating on pure Zn for medical applications10.1016/j.corsci.2020.108602 ↗
16. Influence of pH value and Zn/Ce cations ratio on the microstructures and corrosion resistance of LDH coating on AZ3110.1016/j.corcom.2022.02.002 ↗
17. Jiang, S.Q., Zhang, Z.Y., Wang, D., Wen, Y.Q., Peng, N., and Shang, W. (2021). ZIF-8-based micro-arc oxidation composite coatings enhanced the corrosion resistance and superhydrophobicity of a Mg alloy. J. Magnes. Alloy, in press.
18. Advances in functionalized polymer coatings on biodegradable magnesium alloys—A review10.1016/j.actbio.2018.08.030 ↗
19. Inhibitor encapsulated, self-healable and cytocompatible chitosan multilayer coating on biodegradable Mg alloy: A pH-responsive design10.1039/C6TB00117C ↗
20. Controllable biodegradability, drug release behavior and hemocompatibility of PTX-eluting magnesium stents10.1016/j.colsurfb.2010.10.038 ↗
21. PEO/Polymer hybrid coatings on magnesium alloy to improve biodegradation and biocompatibility properties10.1016/j.surfin.2022.102495 ↗
22. Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ3110.1016/j.corsci.2017.01.025 ↗
23. Corrosion resistance, antibacterial activity and drug release of ciprofloxacin-loaded micro-arc oxidation/silane coating on magnesium alloy AZ3110.1016/j.porgcoat.2021.106357 ↗
24. Corrosion resistance and electrical conductivity of a nano ATO-doped MAO/methyltrimethoxysilane composite coating on magnesium alloy AZ3110.1016/j.corsci.2020.108570 ↗
25. Antibacterial surface design of biomedical titanium materials for orthopedic applications10.1016/j.jmst.2020.10.066 ↗
26. Recent developments in smart antibacterial surfaces to inhibit biofilm formation and bacterial infections10.1039/C8TB01245H ↗
27. Recent advances on stimuli-responsive combination therapy against multidrug-resistant bacteria and biofilm10.1021/acsabm.1c00150 ↗
28. Photoresponsive materials for antibacterial applications10.1016/j.xcrp.2020.100245 ↗
29. Tuning the bandgap of photo-sensitive polydopamine/Ag3PO4/graphene oxide coating for rapid, noninvasive disinfection of implants10.1021/acscentsci.8b00177 ↗
30. An orthobiologics-free strategy for synergistic photocatalytic antibacterial and osseointegration10.1016/j.biomaterials.2021.120853 ↗
31. Black Mn-containing layered double hydroxide coated magnesium alloy for osteosarcoma therapy, bacteria killing, and bone regeneration
32. Mg-Fe LDH sealed PEO coating on magnesium for biodegradation control, antibacteria and osteogenesis10.1016/j.jmst.2021.05.088 ↗
33. Rapid biofilm eradication on bone implants using red phosphorus and near-infrared light10.1002/adma.201801808 ↗
34. Remote eradication of biofilm on titanium implant via near-infrared light triggered photothermal/photodynamic therapy strategy10.1016/j.biomaterials.2019.119479 ↗
35. In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca-P coating on magnesium alloy AZ31
36. In vitro degradation and multi-antibacterial mechanisms of β-cyclodextrin@curcumin embodied Mg(OH)2/MAO coating on AZ31 magnesium alloy10.1016/j.jmst.2022.04.053 ↗
37. Exploiting single atom iron centers in a porphyrin-like MOF for efficient cancer phototherapy10.1021/acsami.9b11238 ↗
38. Organic molecule-based photothermal agents: An expanding photothermal therapy universe10.1039/C7CS00522A ↗
39. Fundamental theory of biodegradable metals—Definition, criteria, and design10.1002/adfm.201805402 ↗
40. Recent advancements in Fe-based biodegradable materials for bone repair
41. Catalytic nanographene oxide with hemin for enhanced photodynamic therapy10.1016/j.jconrel.2020.07.023 ↗
42. Hemin particles-functionalized 3D printed scaffolds for combined photothermal and chemotherapy of osteosarcoma10.1016/j.cej.2021.129919 ↗
43. Recent advances in the design and sensing applications of hemin/coordination polymer-based nanocomposites10.1002/adma.202003883 ↗
44. Metal-organic complex-based chemodynamic therapy agents for cancer therapy
45. Calcium orthophosphate coatings on magnesium and its biodegradable alloys10.1016/j.actbio.2014.02.026 ↗
46. Corrosion resistance and biocompatibility of calcium-containing coatings developed in near-neutral solutions containing phytic acid and phosphoric acid on AZ31B alloy10.1016/j.jallcom.2020.153721 ↗
47. In vitro corrosion resistance and antibacterial performance of novel tin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy10.1016/j.jmst.2018.09.052 ↗
48. Corrosion resistance of an amino acid-bioinspired calcium phosphate coating on magnesium alloy AZ3110.1016/j.jmst.2020.01.046 ↗
49. Insight into microbiologically induced corrosion performance of magnesium in tryptic soy broth with S. aureus and E. coli10.1016/j.jmst.2021.11.030 ↗
50. Development of an antimicrobial peptide-loaded mineralized collagen bone scaffold for infective bone defect repair10.1093/rb/rbaa015 ↗
51. Bright near-infrared π-conjugated oligomer nanoparticles for deep-brain three-photon microscopy excited at the 1700 nm window in vivo10.1021/acsnano.2c03813 ↗
52. Selective transferrin coating as a facile strategy to fabricate BBB-permeable and targeted vesicles for potent RNAi therapy of brain metastatic breast cancer in vivo10.1016/j.jconrel.2021.07.048 ↗
53. Pyrolysis of self-assembled hemin on carbon for efficient oxygen reduction reaction10.1142/S1088424619500585 ↗
54. Optical absorption of sodium copper chlorophyllin thin films in UV-vis-NIR region10.1016/j.saa.2005.12.026 ↗
55. FTIR spectroscopic, thermal and growth morphological studies of calcium hydrogen phosphate dihydrate crystals10.1002/crat.200310100 ↗
56. Growth and characterization of calcium hydrogen phosphate dihydrate crystals from single diffusion gel technique10.1002/crat.200900700 ↗
57. Synthesis and thermal dehydroxylation kinetic of anhydrous calcium phosphate monetite CaHPO4
58. In vacuo interfacial tetrapyrrole metallation10.1039/C5CS00207A ↗
59. A bio-inspired strategy to enhance the photocatalytic performance of g-C3N4 under solar irradiation by axial coordination with hemin10.1016/j.apcatb.2016.08.020 ↗
60. Highly efficient electrocatalysts for oxygen reduction based on 2D covalent organic polymers complexed with non-precious metals10.1002/anie.201308896 ↗
61. Metalated porous porphyrin polymers as efficient heterogeneous catalysts for cycloaddition of epoxides with CO2 under ambient conditions10.1016/j.jcat.2016.03.005 ↗
62. The effect of high temperature aging on the corrosion resistance, mechanical property and antibacterial activity of Cu-2205 DSS10.1016/j.colsurfb.2021.112309 ↗
63. Inhibitive effect of sodium carbonate on corrosion of AZ31 magnesium alloy in NaCl solution10.1016/j.corsci.2020.109131 ↗
64. A novel Mg(OH)2/MgFx(OH)1−x composite coating on biodegradable magnesium alloy for coronary stent application10.1016/j.corsci.2022.110627 ↗
65. Evolution processes of the corrosion behavior and structural characteristics of plasma electrolytic oxidation coatings on AZ31 magnesium alloy10.1016/j.apsusc.2017.09.232 ↗
66. Micro-/nano-structures on biodegradable magnesium@PLGA and their cytotoxicity, photothermal, and anti-tumor effects10.1002/smtd.202000920 ↗
67. Honda, M., Kawanobe, Y., Nagata, K., Ishii, K., Matsumoto, M., and Aizawa, M. (2020). Bactericidal and bioresorbable calcium phosphate cements fabricated by silver-containing tricalcium phosphate microspheres. Int. J. Mol. Sci., 21.10.3390/ijms21113745 ↗
68. Enhanced photocatalytic activity and photothermal effects of cu-doped metal-organic frameworks for rapid treatment of bacteria-infected wounds10.1016/j.apcatb.2019.118248 ↗
69. Maleki-Ghaleh, H., Siadati, M.H., Fallah, A., Koc, B., Kavanlouei, M., Khademi-Azandehi, P., Moradpur-Tari, E., Omidi, Y., Barar, J., and Beygi-Khosrowshahi, Y. (2021). Antibacterial and cellular behaviors of novel zinc-doped hydroxyapatite/graphene nanocomposite for bone tissue engineering. Int. J. Mol. Sci., 22.10.3390/ijms22179564 ↗
70. Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial10.1007/s10856-010-4070-0 ↗
71. Corrosion of an extruded magnesium alloy ZK60 component—The role of microstructural features10.1016/j.jallcom.2011.01.116 ↗
72. In vitro evaluation of degradation, cytocompatibility and antibacterial property of polycaprolactone/hydroxyapatite composite coating on bioresorbable magnesium alloy10.1016/j.jma.2021.07.014 ↗
73. Nanopatterned silk-coated AZ31 magnesium alloy with enhanced antibacterial and corrosion properties10.1016/j.msec.2020.111173 ↗
74. Narrow pH response multilayer films with controlled release of ibuprofen on magnesium alloy10.1016/j.msec.2020.111414 ↗
75. In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants10.1016/j.surfcoat.2017.11.027 ↗
76. Titanate incorporated anodized coating on magnesium alloy for corrosion protection, antibacterial responses and osteogenic enhancement10.1016/j.jma.2020.11.011 ↗
77. Mussel-inspired nano-multilayered coating on magnesium alloys for enhanced corrosion resistance and antibacterial property10.1016/j.colsurfb.2017.06.013 ↗