Sol-Gel Derived Tertiary Bioactive Glass–Ceramic Nanorods Prepared via Hydrothermal Process and Their Composites with Poly(Vinylpyrrolidone-Co-Vinylsilane)
Source abstract
Abstract
Bioactive glass (BG) nanoparticles have wide applications in bone repair due to their bone-bonding and biodegradable nature. In this work, nanometric rod-shaped ternary SiO2-CaO-P2O5 bioactive glass particles were prepared through sol-gel chemistry followed by a base-induced hydrothermal process at 130 °C and 170 °C for various times up to 36 h. This facile, low-temperature and surfactant-free hydrothermal process has shown to be capable of producing uniform nanorods and nanowires. One-dimensional growth of nanorods and the characteristics of siloxane bridging networks were dependent on the hydrothermal temperature and time. Hardened bioactive composites were prepared from BG nanorods and cryo-milled poly(vinylpyrrolidone-co-triethoxyvinylsilane) in the presence of ammonium phosphate as potential bone graft biomaterials. Covalent crosslinking has been observed between the organic and inorganic components within these composites. The ultimate compressive strength and modulus values increased with increasing co-polymer content, reaching 27 MPa and 500 MPa respectively with 30% co-polymer incorporation. The materials degraded in a controlled non-linear manner when incubated in phosphate-buffered saline from 6 h to 14 days. Fibroblast cell attachment and spreading on the composite were not as good as the positive control surfaces and suggested that they may require protein coating in order to promote favorable cell interactions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical and Biochemical Engineering, The University of Western Ontario, London, ON N6A 5B9, Canada
Bone and Joint Institute, The University of Western Ontario, London, ON N6A 5B9, Canada
Schulich Dentistry, The University of Western Ontario, London, ON N6A 5B9, Canada
School of Biomedical Engineering, The University of Western Ontario, London, ON N6A 5B9, Canada
References (40)
Show source-provided references
1. Aslankoohi, N., Mondal, D., Rizkalla, A.S., and Mequanint, K. (2019). Bone repair and regenerative biomaterials: Towards recapitulating the microenvironment. Polymers, 11.10.3390/polym11091437 ↗
2. Bonding mechanisms at the interface of ceramic prosthetic materials10.1002/jbm.820050611 ↗
3. A review of bioactive glasses: Their structure, properties, fabrication and apatite formation10.1002/jbm.a.34690 ↗
4. Bioactive glass in tissue engineering10.1016/j.actbio.2011.03.016 ↗
5. The influence of alkali and alkaline earths on the working range for bioactive glasses10.1002/(SICI)1097-4636(199707)36:1<109::AID-JBM13>3.0.CO;2-D ↗
6. Macroporous bioactive glass-ceramic scaffolds for tissue engineering10.1007/s10856-006-0533-8 ↗
7. Mechanical and in vitro performance of 13–93 bioactive glass scaffolds prepared by a polymer foam replication technique10.1016/j.actbio.2008.04.019 ↗
8. The sol-gel process10.1021/cr00099a003 ↗
9. Synthesis and electrospinning of ε-polycaprolactone-bioactive glass hybrid biomaterials via a sol−gel process10.1021/la102845k ↗
10. Hydrolysis and condensation of silicates: Effects on structure10.1016/0022-3093(88)90005-1 ↗
11. Characterization of melt-derived 45S5 and sol-gel–derived 58S bioactive glasses10.1002/jbm.10026 ↗
12. Structural variations of bioactive glasses obtained by different synthesis routes10.1016/j.ceramint.2016.06.095 ↗
13. Structural and microstructural comparison of bioactive melt-derived and gel-derived glasses from CaO-SiO2 binary system10.1016/j.ceramint.2018.02.070 ↗
14. Surface nanoscale patterning of bioactive glass to support cellular growth and differentiation10.1002/jbm.a.32776 ↗
15. A Freestanding Sol-Gel Technique for Growth of Nanowire Arrays in SiO2-CaO-P2O5-ZrO2 System10.1007/s12633-014-9218-y ↗
16. Effect of Zirconia Concentration on the Growth of Nanowires in Bioactive Glass–Ceramic Coatings10.1111/j.1744-7402.2012.02844.x ↗
17. Recent developments in nanowires for bio-applications from molecular to cellular levels10.1039/C5LC01306B ↗
18. Hydrothermal synthesis and characterisation of bioactive glass-ceramic nanorods10.1016/j.jnoncrysol.2016.04.005 ↗
19. Novel Rice-shaped Bioactive Ceramic Nanoparticles10.1002/adem.200800378 ↗
20. High surface area carbonate apatite nanorod bundles: Surfactant-free sonochemical synthesis and drug loading and release properties10.1016/j.materresbull.2012.12.052 ↗
21. Byrappa, K., and Yoshimura, M. (2001). 1—Hydrothermal Technology—Principles and Applications. Handbook of Hydrothermal Technology, William Andrew Publishing.10.1016/B978-081551445-9.50002-7 ↗
22. Bioactivity, Degradation, and Mechanical Properties of Poly(vinylpyrrolidone-co-triethoxyvinylsilane)/Tertiary Bioactive Glass Hybrids10.1021/acsabm.8b00344 ↗
23. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
24. Poly(vinylpyrrolidone)—A Versatile Polymer for Biomedical and Beyond Medical Applications10.1080/03602559.2014.979506 ↗
25. Crystal Splitting in the Growth of Bi2S310.1021/nl0615930 ↗
26. Preparation and characterization of nano-hydroxyapatite powder using sol-gel technique10.1007/s12034-009-0069-x ↗
27. Process Optimisation to Control the Physico-Chemical Characteristics of Biomimetic Nanoscale Hydroxyapatites Prepared Using Wet Chemical Precipitation10.3390/ma8052297 ↗
28. Influence of the sintering temperature on the structural feature and bioactivity of sol–gel derived SiO2–CaO–P2O5 bioglass10.1016/j.ceramint.2010.03.017 ↗
29. Sol–gel synthesis of SiO2–CaO–P2O5 glasses: Influence of the heat treatment on their bioactivity and biocompatibility10.1016/j.ceramint.2015.06.075 ↗
30. Local structures of mesoporous bioactive glasses and their surface alterations in vitro: Inferences from solid-state nuclear magnetic resonance
31. A structural investigation of the alkali metal site distribution within bioactive glass using neutron diffraction and multinuclear solid state NMR10.1039/c2cp41725a ↗
32. New Insights into the Atomic Structure of 45S5 Bioglass by Means of Solid-State NMR Spectroscopy and Accurate First-Principles Simulations10.1021/cm102089c ↗
33. Calcium phosphate cements for bone substitution: Chemistry, handling and mechanical properties10.1016/j.actbio.2013.11.001 ↗
34. Calcium phosphate bone cements for clinical applications. Part II: Precipitate formation during setting reactions10.1023/A:1008989525461 ↗
35. Bioactive borophosphosilicate-polycaprolactone hybrid biomaterials via a non--aqueous sol gel process10.1039/C6RA08339K ↗
36. Mechanically-competent and cytocompatible polycaprolactone-borophosphosilicate hybrid biomaterials10.1016/j.jmbbm.2017.07.010 ↗
37. Investigation of bioactive glass-cermaic 60SiO2-30CaO-10P2O5 prepared by hydrothermal method
38. A bioactive glass powder-ammonium hydrogen phosphate composite for repairing bone defects10.1002/jab.770010304 ↗
39. A new bioactive bone cement: Its histological and mechanical characterization10.1002/jab.770020402 ↗
40. Bioactive Bone Cement Based on Ca-SiO2-P2O5 Glass10.1111/j.1151-2916.1991.tb07176.x ↗