journal article·2018-07-31Open access

Incorporating Germanium Oxide into the Glass Phase of Novel Zinc/Magnesium-Based GPCs Designed for Bone Void Filling: Evaluating Their Physical and Mechanical Properties

Basel A. Khader, Omar Rodriguez, Mark R. Towler

Abstract

The structural role of Germanium (Ge), when substituting for Zinc (Zn) up to 8 mol % in the 0.48SiO2–0.12CaO–0.36ZnO–0.04MgO glass series, was investigated with respect to both the glass chemistry and also the properties of glass polyalkenoate cements (GPCs) manufactured from them. The Network connectivity (NC) of the glass was calculated to increase from 1.83 to 2.42 with the addition of GeO2 (0–8 mol %). Differential thermal analysis (DTA) results confirmed an increase in the glass transition temperature (Tg) of the glass series with GeO2 content. X-ray photoelectron spectroscopy (XPS) showed an increase in the ratio of bridging oxygens (BO) to non-bridging oxygens (NBO) with the addition of GeO2, supporting the NC and DTA results. 29Si magic angle spinning nuclear magnetic resonance spectroscopy (29Si MAS-NMR) determined a chemical shift from −80.3 to −83.7 ppm as the GeO2 concentration increased. These ionomeric glasses were subsequently used as the basic components in a series of GPCs by mixing them with aqueous polyacrylic acid (PAA). The handling properties of the GPCs resulting were evaluated with respect to the increasing concentration of GeO2 in the glass phase. It was found that the working times of these GPCs increased from 3 to 15 min, while their setting times increased from 4 to 18 min, facilitating the injectability of the Zn/Mg-GPCs through a 16-gauge needle. These Ge-Zn/Mg-GPCs were found to be injectable up to 96% within 12 min. Zn/Mg-GPCs containing GeO2 show promise as injectable cements for use in bone void filling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, ON M5B 2K3, Canada

Li Ka Shing Knowledge Institute, St. Michael’s Hospital, Toronto, ON M5B 1T8, Canada

Funding

Natural Sciences and Engineering Research Council of Canada

References (52)

Show source-provided references
1. The use of miniplates in craniomaxillofacial surgery10.1097/00006534-198701000-00005 ↗
2. Titanium in cranioplasty10.3171/jns.1965.22.3.0292 ↗
3. Common treatments and procedures used for fractures of the distal radius and scaphoid: A review10.1016/j.msec.2016.12.038 ↗
4. A biomechanical analysis of fixation of intra-articular distal radial fractures with calcium phosphate bone cement10.2106/00004623-200209000-00010 ↗
5. Economic implication of osteoporotic spine disease: Cost to society10.1007/s00586-003-0594-z ↗
6. The processing, mechanical properties and bioactivity of zinc based glass ionomer cements10.1007/s10856-005-3578-1 ↗
7. Zinc ion release from novel hard tissue biomaterials
8. Carrilho, M., and Paulo, H.D. (2018). Future Perspectives for Dental Composites. Dental Composite Materials for Direct Restorations, Springer.10.1007/978-3-319-60961-4_18 ↗
9. Antibacterial glass-ionomer cement restorative materials: A critical review on the current status of extended release formulations10.1016/j.jconrel.2017.07.041 ↗
10. (2016, May 02). Endotherapeutics: Serenocem Ear Cement and Granules. Available online: http://www.endotherapeutics.com.au/serenocem.
11. (2016, May 02). Invotec International®: SerenocemTM Ostologic Cement. Available online: http://www.mundinc.com/uploads/serenocem_otologic_cement.pdf.
12. Glass-ionomer cements10.1038/sj.bdj.4806434 ↗
13. Glass-ionomers: Bioactive implant materials10.1016/S0142-9612(98)00138-0 ↗
14. The biocompatibility of glass-poly (alkenoate)(Glass-Ionomer) cements: A review10.1163/156856291X00179 ↗
15. Rodriguez, O., Alhalawani, A., Arshad, S., and Towler, M.R. (2018). Rapidly-Dissolving Silver-Containing Bioactive Glasses for Cariostatic Applications. J. Funct. Biomater., 9.10.3390/jfb9020028 ↗
16. Bone cements and fillers: A review10.1023/A:1026394530192 ↗
17. A novel glass polyalkenoate cement for fixation and stabilisation of the ribcage, post sternotomy surgery: An ex-vivo study10.3390/jfb4040329 ↗
18. A review of polyelectrolyte modifications in conventional glass-ionomer dental cements10.1039/c2jm14880c ↗
19. The role of poly (acrylic acid) in conventional glass polyalkenoate cements10.1515/polyeng-2015-0079 ↗
20. A spectroscopic investigation into the setting and mechanical properties of titanium containing glass polyalkenoate cements10.1007/s10856-010-4089-2 ↗
21. Quantitative evaluation of antibacterial activities of metallic oxide powders (ZnO, MgO and CaO) by conductimetric assay10.1016/S0167-7012(03)00037-X ↗
22. Effect of Radiotherapy on the Radiopacity and Flexural Strength of a Composite Resin
23. The role of Sr2+ on the structure and reactivity of SrO–CaO–ZnO–SiO2 ionomer glasses10.1007/s10856-006-0060-7 ↗
24. Comparison of failure mechanisms for cements used in skeletal luting applications10.1007/s10856-009-3724-2 ↗
25. Khader, B.A., Peel, S.A.F., and Towler, M.R. (2017). An Injectable Glass Polyalkenoate Cement Engineered for Fracture Fixation and Stabilization. J. Funct. Biomater., 8.10.3390/jfb8030025 ↗
26. Varshneya, A.K. (1994). Fundamentals of Inorganic Glasses, Gulf Professional Publishing Academic Press. [1st ed.].10.1016/B978-0-08-057150-8.50025-2 ↗
27. The effect of composition and annealing on the properties aluminum free GPCs: A preliminary evaluation10.1016/j.matlet.2014.05.025 ↗
28. Composition-structure-property relationships for non-classical ionomer cements formulated with zinc-boron germanium-based glasses10.1177/0885328214557906 ↗
29. Structure-properties changes in ZnO-PbO-GeO2 glasses10.1140/epjb/e2011-20211-2 ↗
30. Novel adaptations to zinc-silicate glass polyalkenoate cements: The unexpected influences of germanium based glasses on handling characteristics and mechanical properties10.1016/j.jmbbm.2013.03.012 ↗
31. Development and evaluation of an inherently radiopaque, adhesive bone cement for vertebroplasty10.1016/j.jvir.2013.01.485 ↗
32. The effect of Mg2+ incorporation into the glass phase of zinc-based glass polyalkenoate cements10.1016/j.jnoncrysol.2018.01.007 ↗
33. Chemistry of glass-ionomer cements: A review10.1016/S0142-9612(97)00128-2 ↗
34. Some structural aspects of glasses used in ionomer cements
35. Characterisation of Ga2O3-Na2O-CaO-ZnO-SiO2 bioactive glasses10.1007/s10853-013-7211-2 ↗
36. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
37. Gallium in cancer treatment10.1016/S1040-8428(01)00225-6 ↗
38. International Organization for Standardization (2007). ISO 9917 Dentistry-Water-Based Cements-Part 1: Powder/Liquid Acid-Base Cements, ISO.
39. Neurotoxic effects of aluminium among foundry workers and Alzheimer’s disease10.1016/S0161-813X(02)00097-9 ↗
40. The effect of the disc support system on biaxial tensile strength of a glass ionomer cement10.1016/S0109-5641(01)00053-7 ↗
41. ASTM International (2012). ASTM F640-12: 2012 Standard Test Methods for Determining Radiopacity for Medical Use, ASTM International.
42. Boyd, D. (2005). Zinc-Based Glass Polyalkenoate Cements for Skeletal Applications. [Ph.D. Thesis, University of Limerick].
43. Characterization of the structure of calcium alumino-silicate and calcium fluoro-alumino-silicate glasses by magic angle spinning nuclear magnetic resonance (MAS-NMR)10.1016/j.jnoncrysol.2003.09.049 ↗
44. Ionomeric cement and aluminium encephalopathy10.1016/S0140-6736(95)90138-8 ↗
45. Risk factors, causality, and policy initiatives: The case of aluminum and mental impairment10.1016/S0531-5565(97)00061-2 ↗
46. Mount, G.J. (2001). An Atlas of Glass-Ionomer Cements, a Clinician’s Guide, Martin Dunitz Ltd.. [3rd ed.].10.3109/9780203215456 ↗
47. Ion Release by Endodontic grade glass-ionomer cements10.1007/s10856-007-2315-3 ↗
48. Influence of magnesia on the structure and properties of bioactive glasses10.1016/j.jnoncrysol.2009.04.074 ↗
49. Phase separation and structural differences between alkali silicate glasses prepared by the sol-gel and melt-quench methods10.1111/j.1151-2916.1998.tb02632.x ↗
50. An investigation into the structure and reactivity of calcium-zinc-silicate ionomer glasses using MAS-NMR spectroscopy10.1007/s10856-006-8465-x ↗
51. Contact Angle and Wetting Properties10.1007/978-3-642-34243-1_1 ↗
52. Yassin, M.A.A.Y. (2017). Surface Hydrophilicity: A Key Factor in Developing Bone Tissue Engineering Constructs. [Ph.D. Thesis, University of Bergen].