journal article·2021-02-12Open access

Preliminary Studies on Graphene-Reinforced 3D Products Obtained by the One-Stage Sacrificial Template Method for Bone Reconstruction Applications

Aura-Cătălina Mocanu, Florin Miculescu, George E. Stan, Robert-Cătălin Ciocoiu, Mihai Cosmin Corobea, Marian Miculescu, Lucian Toma Ciocan

Abstract

The bone remodeling field has shifted focus towards the delineation of products with two main critical attributes: internal architectures capable to promote fast cell colonization and good mechanical performance. In this paper, Luffa-fibers and graphene nanoplatelets were proposed as porogen template and mechanical reinforcing agent, respectively, in view of framing 3D products by a one-stage polymer-free process. The ceramic matrix was prepared through a reproducible technology, developed for the conversion of marble resources into calcium phosphates (CaP) powders. After the graphene incorporation (by mechanical and ultrasonication mixing) into the CaP matrix, and Luffa-fibers addition, the samples were evaluated in both as-admixed and thermally-treated form (compact/porous products) by complementary structural, morphological, and compositional techniques. The results confirmed the benefits of the two agents’ addition upon the compact products’ micro-porosity and the global mechanical features, inferred by compressive strength and elastic modulus determinations. For the porous products, overall optimal results were obtained at a graphene amount of <1 wt.%. Further, no influence of graphene on fibers’ ability to generate at high temperatures internal interconnected-channels-arrays was depicted. Moreover, its incorporation led to a general preservation of structural composition and stability for both the as-admixed and thermally-treated products. The developed CaP-reinforced structures sustain the premises for prospective non- and load-bearing biomedical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Graphene and Nanomaterials Applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallic Materials Science, Physical Metallurgy, University Politehnica of Bucharest, 313 Splaiul Independentei, J Building, RO-060042 Bucharest, Romania

National Institute of Materials Physics, 405A Atomistilor Street, RO-077125 Măgurele, Romania

Polymers Department, National Institute for Research & Development in Chemistry and Petrochemistry, 202 Splaiul Independentei, RO-060021 Bucharest, Romania

Prosthetics Technology and Dental Materials Department, “Carol Davila” University of Medicine and Pharmacy, 37 Dionisie Lupu Street, RO-020022 Bucharest, Romania

Funding

Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii

References (64)

Show source-provided references
1. Mucalo, M.R. (2019). Special Issue: Novel Advances and Approaches in Biomedical Materials Based on Calcium Phosphates. Materials, 12.10.3390/ma12030405 ↗
2. In situ synthesis of three dimensional graphene-hydroxyapatite nano powders via hydrothermal process10.1016/j.matchemphys.2018.10.023 ↗
3. Bioinspired approaches to toughen calcium phosphate-based ceramics for bone repair10.1016/j.jmbbm.2020.104078 ↗
4. Bone tissue engineering: State of the union10.1016/j.drudis.2014.04.010 ↗
5. Resorption of monetite calcium phosphate cement by mouse bone marrow derived osteoclasts10.1016/j.msec.2015.03.038 ↗
6. Neto, A.S., and Ferreira, J.M.F. (2018). Synthetic and Marine-Derived Porous Scaffolds for Bone Tissue Engineering. Materials, 11.10.3390/ma11091702 ↗
7. Faster Biomineralization and Tailored Mechanical Properties of Marine-Resource-Derived Hydroxyapatite Scaffolds with Tunable Interconnected Porous Architecture10.1021/acsabm.9b00151 ↗
8. Comprehensive analysis of compatible natural fibre as sacrificial porogen template for tailored ceramic 3D bioproducts destined for hard tissue reconstruction10.1016/j.ceramint.2020.10.113 ↗
9. Neacsu, P., Staras, A.I., Voicu, S.I., Ionascu, I., Soare, T., Uzun, S., Cojocaru, V.D., Pandele, A.M., Croitoru, S.M., and Miculescu, F. (2017). Characterization and In Vitro and In Vivo Assessment of a Novel Cellulose Acetate-Coated Mg-Based Alloy for Orthopedic Applications. Materials, 10.10.3390/ma10070686 ↗
10. Antoniac, I., Popescu, D., Zapciu, A., Antoniac, A., Miculescu, F., and Moldovan, H. (2019). Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing. Materials, 12.10.3390/ma12050719 ↗
11. A new synthetic granular calcium phosphate compound induces new bone in a sinus lift rabbit model10.1016/j.jdent.2017.12.009 ↗
12. Effect of micron sized silver particles concentration on the adhesion induced by sintering and antibacterial properties of hydroxyapatite microcomposites10.1080/01694243.2016.1163808 ↗
13. Biphasic calcium phosphates bioceramics (HA/TCP): Concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research10.1016/j.msec.2016.11.039 ↗
14. Synthesis, chemical and microstructural characterization of micro macroporous biphasic calcium phosphate granules10.1002/xrs.2762 ↗
15. Induced wettability and surface-volume correlation of composition for bovine bone derived hydroxyapatite particles10.1016/j.apsusc.2017.07.074 ↗
16. Mocanu, A.-C., Stan, G.E., Maidaniuc, A., Miculescu, M., Antoniac, I.V., Ciocoiu, R.-C., Voicu, Ș.I., Mitran, V., Cîmpean, A., and Miculescu, F. (2019). Naturally-Derived Biphasic Calcium Phosphates through Increased Phosphorus-Based Reagent Amounts for Biomedical Applications. Materials, 12.10.3390/ma12030381 ↗
17. Effect of heating process on micro structure level of cortical bone prepared for compositional analysis
18. Cortical bone as resource for producing biomimetic materials for clinical use
19. Facile synthesis and characterization of hydroxyapatite particles for high value nanocomposites and biomaterials10.1016/j.vacuum.2017.06.008 ↗
20. Influence of the modulated two-step synthesis of biogenic hydroxyapatite on biomimetic products’ surface10.1016/j.apsusc.2017.07.144 ↗
21. Marine organisms as a source of natural matrix for bone tissue engineering10.1016/j.ceramint.2018.10.108 ↗
22. Two step porosification of biomimetic thin-film hydroxyapatite/alpha-tri calcium phosphate coatings by pulsed electron beam irradiation10.1038/s41598-018-32612-x ↗
23. Fabrication Aspects of Porous Biomaterials in Orthopedic Applications: A Review10.1021/acsbiomaterials.7b00615 ↗
24. Biocompatibility and biomechanical characteristics of loofah based scaffolds combined with hydroxyapatite, cellulose, poly- l -lactic acid with chondrocyte-like cells10.1016/j.msec.2016.07.007 ↗
25. Internal and external surface features of newly developed porous ceramics with random interconnected 3D channels by a fibrous sacrificial porogen method10.1016/j.apsusc.2019.05.354 ↗
26. Overview of Hydroxyapatite–Graphene Nanoplatelets Composite as Bone Graft Substitute: Mechanical Behavior and In-vitro Biofunctionality10.1080/10408436.2017.1333951 ↗
27. Toxicology of graphene-based nanomaterials10.1016/j.addr.2016.04.028 ↗
28. An overview of graphene-based hydroxyapatite composites for orthopedic applications
29. Fabrication of cellulose triacetate/graphene oxide porous membrane10.1002/pat.3646 ↗
30. Effect of graphene on setting and mechanical behaviour of tricalcium phosphate bioactive cements10.1016/j.jmbbm.2018.09.002 ↗
31. From bulk to cellular structures: A review on ceramic/graphene filler composites10.1016/j.jeurceramsoc.2017.03.016 ↗
32. Development of graphene oxide/calcium phosphate coating by pulse electrodeposition on anodized titanium: Biocorrosion and mechanical behavior10.1016/j.jmbbm.2018.11.011 ↗
33. Interactions of graphene with mammalian cells: Molecular mechanisms and biomedical insights10.1016/j.addr.2016.08.009 ↗
34. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
35. A study on the influence of the primary electron beam on nanodimensional layers analysis
36. The thermal stability of hydroxyapatite in biphasic calcium phosphate ceramics10.1007/s10856-007-3252-x ↗
37. Thermal stability of β-tricalcium phosphate doped with monovalent metal ions10.1016/j.materresbull.2009.05.012 ↗
38. Thermal decomposition and reconstitution of hydroxyapatite in air atmosphere10.1016/S0142-9612(99)00076-9 ↗
39. A comprehensive characterization of chemically treated Brazilian sponge-gourds (Luffa cylindrica)10.1016/j.polymertesting.2004.12.004 ↗
40. Thermal and optical characterization of the calcium phosphate biomaterial hydroxyapatite10.1063/1.362650 ↗
41. Synthesis of hydroxyapatite–reduced graphite oxide nanocomposites for biomedical applications: Oriented nucleation and epitaxial growth of hydroxyapatite10.1039/c3tb00531c ↗
42. Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application10.1016/j.msec.2015.01.050 ↗
43. Preparation and comprehensive characterization of a calcium hydroxyapatite reference material10.6028/jres.109.042 ↗
44. The Infrared and Raman Spectra of β-and α-Tricalcium Phosphate (Ca3(Po4)2)10.1080/00387019808007439 ↗
45. Bioglass implant-coating interactions in synthetic physiological fluids with varying degrees of biomimicry10.2147/IJN.S123236 ↗
46. Comparative physical, chemical and biological assessment of simple and titanium-doped ovine dentine-derived hydroxyapatite coatings fabricated by pulsed laser deposition10.1016/j.apsusc.2017.04.025 ↗
47. Trpkovska, M., Šoptrajanov, B., and Malkov, P. (1999). FTIR reinvestigation of the spectra of synthetic brushite and its partially deuterated analogues. J. Mol. Struct., 661–666.10.1016/S0022-2860(98)00923-5 ↗
48. Hydroxyapatite: Mechanism of formation and properties10.1007/BF02015413 ↗
49. Evidence of hydroxyl-ion deficiency in bone apatites: An inelastic neutron-scattering study10.1016/S8756-3282(00)00273-8 ↗
50. Lack of OH in nanocrystalline apatite as a function of degree of atomic order: Implications for bone and biomaterials10.1016/S0142-9612(03)00487-3 ↗
51. Microstructure and anisotropic mechanical properties of graphene nanoplatelet toughened biphasic calcium phosphate composite10.1016/j.ceramint.2013.03.018 ↗
52. Dispersion patterns of graphene and carbon nanotubes in ceramic matrix composites10.1016/j.cplett.2011.06.047 ↗
53. Investigation of biphasic calcium phosphate (BCp)/polyvinylpyrrolidone (PVp) /graphene oxide (GO) composite for biomedical implants10.1016/j.ceramint.2020.06.224 ↗
54. Chemical and structural characterization of char development during lignocellulosic biomass pyrolysis10.1016/j.biortech.2017.07.017 ↗
55. Numerical study of crack initiation and growth in human cortical bone: Effect of micro-morphology10.1016/j.engfracmech.2020.107051 ↗
56. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone10.1039/C7TB00741H ↗
57. Cement from nanocrystalline hydroxyapatite: Effect of calcium phosphate ratio10.1007/s10856-005-4727-2 ↗
58. Fabrication of graphene incorporated biphasic calcium phosphate composite and evaluation of impact of graphene in the in-vitro biomineralization process10.1016/j.matchemphys.2019.04.049 ↗
59. Textured and hierarchically structured calcium phosphate ceramic blocks through hydrothermal treatment10.1016/j.biomaterials.2015.07.026 ↗
60. Processing and properties of biphasic calcium phosphates bioceramics obtained by pressureless sintering and hot isostatic pressing10.1016/j.jeurceramsoc.2012.12.020 ↗
61. Behaviour of human femur bone under bending and impact loads
62. Mineralization in micropores of calcium phosphate scaffolds10.1016/j.actbio.2018.11.003 ↗
63. Preparation of graphene oxide-reinforced calcium phosphate/calcium sulfate/methylcellulose-based injectable bone substitutes10.1557/mrc.2019.125 ↗
64. Lee, H., Jang, T.-S., Song, J., Kim, H.-E., and Jung, H.-D. (2017). The Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting. Materials, 10.10.3390/ma10040367 ↗