journal article·2026-05-02Open access

Biomimetic Deposition of Zn-Doped Calcium Phosphate Coatings on Surface-Activated Ti6Al4V for Multifunctional Implant Interfaces

Yaimi Martín-Santana, Yadira González-Carranza, Leonel Díaz-Tato, Arturo Juárez-Hernández, Edgar Omar García-Sánchez, Myriam Angélica De La Garza-Ramos, Edén Amaral Rodríguez-Castellanos, Marco Antonio Loudovic Hernández-Rodríguez

Abstract

The design of implant surfaces that support bone integration while limiting bacterial colonization remains a central challenge in biomaterials science and engineering. In this work, zinc-doped biomimetic calcium phosphate (CaP-Zn) coatings were fabricated on Ti6Al4V through surface activation followed by deposition in supersaturated simulated body fluid (SBF). Acid and alkali–calcium treatments produced a porous, calcium-rich interface that enabled the uniform formation of apatite-like CaP layers. Zinc incorporation was achieved without suppressing the formation of CaP phases and led to systematic changes in coating microstructure and surface chemistry. Spectroscopic and structural analyses indicated Zn incorporation within the CaP matrix, consistent with partial Ca2+ substitution and its association with poorly crystalline domains. These features promoted controlled ionic release and localized dissolution–reprecipitation behavior. Antibacterial testing against Streptococcus mutans revealed a clear Zn-dependent reduction in bacterial viability, while cytocompatibility remained within acceptable limits at moderate Zn levels. Finally, the coatings combine intrinsic bioactivity with ion-mediated antibacterial functionality, offering a multifunctional surface strategy for advanced titanium-based implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Facultad de Ingeniería Mecánica y Eléctrica (FIME), Universidad Autónoma de Nuevo León (UANL), San Nicolás de los Garza 66450, Nuevo León, Mexico

MAGEOTEC, Frutilla 214, Mirasol 1o., Monterrey 64102, Nuevo León, Mexico

Unidad de Odontología Integral y Especialidades, Centro de Investigación y Desarrollo en Ciencias de la Salud (CIDICS), Universidad Autónoma de Nuevo León (UANL), Ave. Carlos Canseco s/n con Ave. Gonzalitos, Mitras Centro, Monterrey 64460, Nuevo León, Mexico

Departamento de Microbiología, Facultad de Odontología, Universidad Autónoma de Nuevo León (UANL), Monterrey 64460, Nuevo León, Mexico

References (100+)

Show source-provided references
1. Metallic implants with properties and latest production techniques: A review
2. Titanium-based alloys and composites for orthopedic implants applications: A comprehensive review10.1016/j.matdes.2024.112850 ↗
3. Antibacterial surface design of biomedical titanium materials for orthopedic applications
4. Galteri, G., Palanca, M., Alesi, D., Zaffagnini, S., Morellato, K., Gruppioni, E., and Cristofolini, L. (2024). Reliable in vitro method for the evaluation of the primary stability and load transfer of transfemoral prostheses for osseointegrated implantation. Front. Bioeng. Biotechnol., 12.10.3389/fbioe.2024.1360208 ↗
5. Strontium and magnesium ions released from bioactive titanium metal promote early bone bonding in a rabbit implant model10.1016/j.actbio.2017.09.019 ↗
6. Surface multifunctionalization of inert ceramic implants by calcium phosphate biomimetic coating doped with nanoparticles encapsulating antibiotics10.1021/acsami.3c03884 ↗
7. Citrate stabilizes hydroxyapatite precursors: Implications for bone mineralization10.1021/acsbiomaterials.1c00196 ↗
8. A strong, tough, and osteoconductive hydroxyapatite mineralized polyacrylamide/dextran hydrogel for bone tissue regeneration10.1016/j.actbio.2019.02.019 ↗
9. Silver oxide-containing hydroxyapatite coating supports osteoblast function and enhances implant anchorage strength in rat femur10.1002/jor.22903 ↗
10. Microstructural characterization and corrosion analysis of HA/TiO2 and HA/ZrO2 composite coating on Ti-alloy by laser cladding10.1016/j.apsadv.2024.100655 ↗
11. Lin, X., Chen, J., Liao, Y., Pathak, J., Li, H., and Liu, Y. (2020). Biomimetic calcium phosphate coating as a drug delivery vehicle for bone tissue engineering: A mini-review. Coatings, 10.10.3390/coatings10111118 ↗
12. Revised method for preparation of simulated body fluid for assessment of the apatite-forming ability of bioactive materials: Proposal of mixing two stock solutions10.1039/D4RA07739C ↗
13. Novel bioactive materials developed by simulated body fluid evaluation: Surface-modified Ti metal and its alloys10.1016/j.actbio.2016.08.013 ↗
14. Preparation of SBF with different HCO3− content and its influence on the composition of biomimetic apatites10.1016/j.actbio.2005.11.001 ↗
15. Assessing the kinetics and pore-scale characteristics of biological calcium carbonate precipitation in porous media using a microfluidic chip experiment10.1029/2019WR025420 ↗
16. Multifunctional homogeneous calcium phosphate coatings: Toward antibacterial and cell adhesive titanium scaffolds10.1016/j.surfcoat.2020.126557 ↗
17. Lanzino, M., Le, L., Höppel, A., Killinger, A., Rheinheimer, W., Dembski, S., Al-Ahmad, A., Mayr, H., and Seidenstuecker, M. (2024). Suspension-sprayed calcium phosphate coatings with antibacterial properties. J. Funct. Biomater., 15.10.3390/jfb15100281 ↗
18. Pietrocola, G., Campoccia, D., Motta, C., Montanaro, L., Arciola, C., and Speziale, P. (2022). Colonization and infection of indwelling medical devices by Staphylococcus aureus with an emphasis on orthopedic implants. Int. J. Mol. Sci., 23.10.3390/ijms23115958 ↗
19. Biofilms: Understanding the structure and contribution towards bacterial resistance in antibiotics10.1016/j.medmic.2023.100084 ↗
20. Rodríguez-Merchán, E., Davidson, D., and Liddle, A. (2021). Recent strategies to combat infections from biofilm-forming bacteria on orthopaedic implants. Int. J. Mol. Sci., 22.10.3390/ijms221910243 ↗
21. Designer dual therapy nanolayered implant coatings eradicate biofilms and accelerate bone tissue repair10.1021/acsnano.6b00087 ↗
22. Multifunctional titanium surfaces for orthopedic implants: Antimicrobial activity and enhanced osseointegration10.1021/acsabm.1c00613 ↗
23. Biodegradable antibacterial TCP implant coatings with magnesium phosphate-based supraparticles10.1002/jbm.a.37963 ↗
24. Zinc-based tannin-modified composite microparticulate scaffolds with balanced antimicrobial activity and osteogenesis for infected bone defect repair10.1002/adhm.202300303 ↗
25. Fabrication of a nanoscale magnesium/copper metal–organic framework on Zn-based guided bone generation membranes for enhancing osteogenesis, angiogenesis and bacteriostasis properties10.1021/acsami.3c16970 ↗
26. Heterogeneous zinc/catechol-derived resin microsphere-functionalized composite hydrogels with antibacterial and anti-inflammatory activities promote bacterial-infected wound healing10.1093/rb/rbaf081 ↗
27. Isomorphous substitutions in β-tricalcium phosphate: The different effects of zinc and strontium10.1016/S0162-0134(96)00219-X ↗
28. Kumar, T., Madhumathi, K., Basha, R., and Doble, M. (2015). Dual mode antibacterial activity of ion substituted calcium phosphate nanocarriers for bone infections. Front. Bioeng. Biotechnol., 3.10.3389/fbioe.2015.00059 ↗
29. Correlation between biomedical and structural properties of Zn/Sr modified calcium phosphates10.1007/s10534-024-00599-w ↗
30. Exploring the molecular biology of zinc-doped hydroxyapatite nanocomposites as fillers for dental materials: A self-defensive approach targeting bacterial DNA10.1088/2053-1591/ad7785 ↗
31. Electrophoretic deposition of zinc-doped hydroxyapatite coatings on titanium: Deposition kinetics and coating morphology10.1504/IJSURFSE.2019.102375 ↗
32. Role of Zn and Mg substitutions on the mechanical behaviour of biomimetic hydroxyapatite and insight of the emergence of hydroxyapatite-ZnO nanocomposite10.1016/j.matchar.2021.111107 ↗
33. Tithito, T., Sillapaprayoon, S., Pimtong, W., Thongbunchoo, J., Charoenphandhu, N., Krishnamra, N., Lert-Itthiporn, A., Maneeprakorn, W., and Pon-On, W. (2023). Development of biomaterials based on biomimetic trace elements co-doped hydroxyapatite: Physical, in vitro osteoblast-like cell growth and in vivo cytotoxicity in zebrafish studies. Nanomaterials, 13.10.3390/nano13020255 ↗
34. Vieira, G., Almeida, T., Oliveira, F., Azzi, P., Rodrigues, C., Souza, R., Lacerda, S., Lages, F., and Martins, M. (2025). Comparative study of acid etching and SLA surface modification for titanium implants. Materials, 18.10.3390/ma18071632 ↗
35. Coordinated control of drug release and corrosion resistance for 3D-printed porous Mg alloy in bone implant applications10.1016/j.jma.2025.09.024 ↗
36. Smart gradient coating suitable for bone growth prepared on plasma-electrolytically oxidised Mg and its sequential degradation behaviour10.1016/j.jma.2024.05.026 ↗
37. Historical development of simulated body fluids used in biomedical applications: A review10.1016/j.microc.2020.104713 ↗
38. Preparation of bioactive Ti6Al4V surfaces by a simple method10.1016/S0142-9612(97)00232-9 ↗
39. Hung, K., Lin, Y.-C., and Feng, H. (2017). The Effects of Acid Etching on the Nanomorphological Surface Characteristics and Activation Energy of Titanium Medical Materials. Materials, 10.10.3390/ma10101164 ↗
40. Influence of Temperature and Acid Etching Time on the Superficial Characteristics of Ti. Materials Research-ibero-american
41. Surface modification of titanium by etching in concentrated sulfuric acid10.1016/j.dental.2005.09.007 ↗
42. Wang, Q., Zhou, P., Liu, S., Attarilar, S., Ma, R.L.-W., Zhong, Y., and Wang, L. (2020). Multi-Scale Surface Treatments of Titanium Implants for Rapid Osseointegration: A Review. Nanomaterials, 10.10.3390/nano10061244 ↗
43. Kreller, T., Sahm, F., Bader, R., Boccaccini, A.R., Jonitz-Heincke, A., and Detsch, R. (2021). Biomimetic Calcium Phosphate Coatings for Bioactivation of Titanium Implant Surfaces: Methodological Approach and In Vitro Evaluation of Biocompatibility. Materials, 14.10.3390/ma14133516 ↗
44. Effects of different acid etching protocols on the enhanced osteogenic potential of titanium surfaces: An in vitro study10.4012/dmj.2024-115 ↗
45. Liu, Q., Zhao, Y., Hao, J., Qiu, L., Su, H., Wang, X., and Su, Y. (2025). Preparation of high-quality pure titanium SLA surface and evaluation of its physicochemical and biological properties-in vitro experiments. BMC Oral Health, 25.10.1186/s12903-025-06488-z ↗
46. Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces10.1166/jnn.2015.10266 ↗
47. Biological Behavior of Osteoblast Cell and Apatite Forming Ability of the Surface Modified Ti Alloys10.1166/jnn.2016.11909 ↗
48. Le, P.T.M., Shintani, S.A., Takadama, H., Ito, M., Kakutani, T., Kitagaki, H., Terauchi, S., Ueno, T., Nakano, H., and Nakajima, Y. (2021). Bioactivation Treatment with Mixed Acid and Heat on Titanium Implants Fabricated by Selective Laser Melting Enhances Preosteoblast Cell Differentiation. Nanomaterials, 11.10.3390/nano11040987 ↗
49. Effect of acid etching temperature on surface physiochemical properties and cytocompatibility of Ti6Al4V ELI alloy10.1088/2053-1591/ab3ac5 ↗
50. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications10.1590/1980-5373-mr-2018-0782 ↗
51. Influence of the Etching Time of Ti6Al4V Titanium Alloy with Selected Acid Solutions on Changes in Physical Parameters of the Element10.21495/em2024-038 ↗
52. Numerical model for acid-etching of titanium: Engineering surface roughness for dental implants10.1016/j.jmapro.2020.09.014 ↗
53. Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM10.1016/j.jmbbm.2020.104145 ↗
54. Farooq, M., Mughal, M., Ahmed, N., Mufti, N., Al-Ahmari, A., and He, Y. (2020). Investigation of surface integrity of Ti6Al4V ELI using Si-mixed electric discharge machining. Materials, 13.10.3390/ma13071549 ↗
55. Effect of surface modifications of additively manufactured Ti-6Al-4V alloys on apatite formation ability for biomedical applications10.1016/j.jallcom.2021.161445 ↗
56. Microstructural, mechanical, electrochemical and biological studies of an electron beam melted Ti-6Al-4V alloy10.1016/j.mtcomm.2022.103337 ↗
57. Analysis of the roles of microporosity and BMP-2 on multiple measures of bone regeneration and healing in calcium phosphate scaffolds10.1016/j.actbio.2010.12.030 ↗
58. Cañas-Gutiérrez, A., Toro, L., Fornaguera, C., Borrós, S., Osorio, M., Castro-Herazo, C., and Arboleda-Toro, D. (2023). Biomineralization in three-dimensional scaffolds based on bacterial nanocellulose for bone tissue engineering: Feature characterization and stem cell differentiation. Polymers, 15.10.20944/preprints202302.0431.v1 ↗
59. Introducing titanium hydride on porous transport layer for more energy efficient water electrolysis with proton exchange membrane10.1016/j.jpowsour.2023.232913 ↗
60. Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide10.1021/jp055687u ↗
61. Surface potential change in bioactive titanium metal during the process of apatite formation in simulated body fluid10.1002/jbm.a.20039 ↗
62. Role of calcium ions in defining the bioactivity of surface modified Ti metal10.1016/j.msec.2018.12.096 ↗
63. Micro/nano-structured titanium surfaces modified by NaOH–CaCl2–heat–water treatment: Biomimetic calcium phosphate deposition and hMSCs behavior10.1016/j.matchemphys.2021.124896 ↗
64. Biofunctional calcium titanate coating on titanium by simple chemical treatment process using calcium-hydroxide slurry—Effects of the heating temperatures10.1016/j.porgcoat.2010.11.015 ↗
65. Influence of early mineral deposits of silicate- and aluminate-based cements on push-out bond strength to root dentine10.1111/iej.12791 ↗
66. Calcium-doped titanium thin films prepared with the assistance of an oxygen ion beam: The effect of Ca content on microstructure, mechanical properties and adhesion
67. Evaluation of calcium titanate as apatite growth promoter
68. Kim, D., Min, K., and Pack, S. (2024). Efficient bioactive surface coatings with calcium minerals: Step-wise biomimetic transformation of vaterite to carbonated apatite. Biomimetics, 9.10.3390/biomimetics9070402 ↗
69. Zn-doped CaP coating equips Ti implants with corrosion resistance, biomineralization, antibacterial and immunotolerant activities10.1016/j.jare.2025.01.045 ↗
70. Control of surface topography in biomimetic calcium phosphate coatings10.1021/la203224a ↗
71. Murphy, B., Morris, M., and Baez, J. (2023). Development of hydroxyapatite coatings for orthopaedic implants from colloidal solutions: Part 1—Effect of solution concentration and deposition kinetics. Nanomaterials, 13.10.3390/nano13182577 ↗
72. Enzymatic pH control for biomimetic deposition of calcium phosphate coatings10.1016/j.actbio.2013.09.036 ↗
73. Control in mineralization by the polysaccharide-coated liposome via the counter-diffusion of ions10.1021/cm201211n ↗
74. Computational modelling of local calcium ions release from calcium phosphate-based scaffolds10.1007/s10237-016-0827-9 ↗
75. Ion pathways in biomineralization: Perspectives on uptake, transport, and deposition of calcium, carbonate and phosphate10.1021/jacs.1c09174 ↗
76. Adhesion failure behavior of sputtered calcium phosphate thin film coatings evaluated using microscratch testing10.1016/j.jmbbm.2010.01.002 ↗
77. Mechanical behaviour of brushite and hydroxyapatite coatings electrodeposited on newly developed FeMnSiPd alloys10.1016/j.jallcom.2017.09.187 ↗
78. Analysing the coupled effects of compressive and diffusion induced stresses on the nucleation and propagation of circular coating blisters in the presence of micro-cracks10.1016/j.engfailanal.2016.07.003 ↗
79. Critical cracking thickness of calcium phosphates biomimetic coating: Verification via a Singh–Tirumkudulu model10.1016/j.ceramint.2017.08.134 ↗
80. Fracture-based transient thermo-mechanical analysis of reciprocating engine thermal barrier coatings10.1016/j.engfracmech.2022.108568 ↗
81. Influence of residual stress on mechanical and tribology behaviors of calcium-phosphate coating on commercially pure titanium via integrated electrospinning and rapid heating and cooling process10.1007/s11665-024-09534-z ↗
82. Inhibiting effect of zinc on hydroxylapatite crystallization10.1016/0162-0134(94)00036-A ↗
83. In vitro assessment of zinc apatite coatings on titanium surfaces10.1016/j.ceramint.2016.06.203 ↗
84. Synthesis and characterization of Zn-doped hydroxyapatite: Scaffold application, antibacterial and bioactivity studies10.1016/j.heliyon.2019.e01716 ↗
85. An efficient metal-organic framework-based drug delivery platform for synergistic antibacterial activity and osteogenesis10.1016/j.jcis.2023.02.149 ↗
86. Balancing the antibacterial and pro-osteogenic properties of Ti-based implants by partial conversion of ZnO nanorods into hybrid zinc phosphate nanostructures10.1002/adfm.202311812 ↗
87. A drug-loaded composite coating to improve osteogenic and antibacterial properties of Zn–1Mg porous scaffolds as biodegradable bone implants
88. Osteogenic and antibacterial enhancement by alloying design and microstructural modification of additively manufactured biodegradable metals10.1016/j.biomaterials.2025.123481 ↗
89. Zhang, H., Wu, Z., Wang, Z., Yan, X., Duan, X., and Sun, H. (2025). Advanced surface modification techniques for titanium implants: A review of osteogenic and antibacterial strategies. Front. Bioeng. Biotechnol., 13.10.3389/fbioe.2025.1549439 ↗
90. Multiphase zinc and magnesium mono-substituted calcium phosphates derived from cuttlefish bone: A multifunctional biomaterial10.1016/j.ceramint.2022.11.295 ↗
91. Effect of zinc ions on the structural characteristics of hydroxyapatite bioceramics10.1016/j.ceramint.2020.02.192 ↗
92. Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction10.1016/j.dental.2023.11.010 ↗
93. Otsuka, M., Saito, H., and Sasaki, T. (2022). Analytical evaluation of wet and dry mechanochemical syntheses of calcium-deficient hydroxyapatite containing zinc using X-ray diffractometry and near-infrared spectroscopy. Pharmaceutics, 14.10.3390/pharmaceutics14102105 ↗
94. Zinc ion sorption onto solution-precursor plasma-sprayed hydroxyapatite coatings via Raman and X-ray photoelectron spectroscopies10.1080/00387010.2021.1947323 ↗
95. Physicochemical characterization of zinc-substituted calcium phosphates10.1007/s12034-016-1163-5 ↗
96. First-principles study of substitutional magnesium and zinc in hydroxyapatite and octacalcium phosphate10.1063/1.2940337 ↗
97. STEM and EDXS characterisation of physico-chemical reactions at the periphery of sol–gel derived Zn-substituted hydroxyapatites during interactions with biological fluids10.1016/j.colsurfb.2005.03.001 ↗
98. The role of zinc in bone tissue health and regeneration—A review10.1007/s12011-023-03631-1 ↗
99. Does the incorporation of zinc into calcium phosphate improve bone repair? A systematic review10.1016/j.ceramint.2017.10.157 ↗
100. Surface, microstructural, and adhesion strength investigations of a bioactive hydroxyapatite-titanium oxide ceramic coating applied to Ti-6Al-4V alloys by plasma thermal spraying10.1590/1980-5373-mr-2017-1144 ↗