journal article·2026-04-03Open access

Structure and Mechanical Properties of Ti-38Zr-(8-10)Nb (at. %) Alloys for Medical Use

Konstantin V. Sergienko, Sergei V. Konushkin, Yaroslava A. Morozova, Maria A. Sudarchikova, Mikhail A. Kaplan, Vadim K. Zhidkov, Tatyana M. Sevostyanova, Aleksander V. Simakin, Ilya V. Baimler, Mikhail A. Sevostyanov, Alexey G. Kolmakov

Abstract

The research described in this article is a continuation of a series of studies on biocompatible materials, focused on finding the optimal alloy composition and heat treatment regimes. The use of materials with a low Young’s modulus ensures the long-term safety of the implant by reducing the stress shielding effect, which causes bone resorption. This work investigates the effect of alloying with niobium in the range of (8–10) at. % on the Ti-38Zr alloy, specifically its structure, mechanical properties, Young’s modulus, and superelasticity. In this study, plates of the Ti-38Zr-(8-10)Nb (at. %) alloy were investigated after quenching and subsequent annealing. In Ti-38Zr-(8-10)Nb alloys, quenching from 600 °C fixes the β-phase of Ti. In alloys with (8-9)Nb, this is a metastable β-phase, as evidenced by its superelastic behavior under cyclic tension. Annealing at 400 °C leads to a clear decomposition of the quenched high-temperature β-phase in Ti-38Zr-(8-9)Nb alloys into β- and α′-phases. Based on the mechanical test results, it can be inferred that the precipitation of the brittle ω-phase and the α′-phase occur concurrently, since annealing at 400 °C causes a pronounced embrittlement of the Ti-38Zr-(8–9)Nb alloys (with elongation dropping from ~15% to 0.7–2.5%, respectively) alongside a substantial increase in strength (from 500 MPa to 1010 MPa). For the Ti-38Zr-10Nb alloy, the ductility also declines but remains within acceptable limits (from ~14% to ~10%), while the strength rises from 520 MPa to 630 MPa. The Young’s modulus of the Ti-38Zr-(8-10)Nb alloy after quenching is ~80 GPa. After annealing, it increases to 95 GPa for alloys with (8-9)Nb, while for 10Nb it remains at approximately 80 GPa.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences (IMET RAS), 119334 Moscow, Russia

National Medical and Surgical Center Named after N.I. Pirogov of the Ministry of Health of the Russian Federation, 117513 Moscow, Russia

Moscow Regional Research and Clinical Institute (MONIKI), 129110 Moscow, Russia

Prokhorov General Physics Institute of the Russian Academy of Sciences, Vavilov Street 38, 119991 Moscow, Russia

Funding

Russian Science Foundation

References (27)

Show source-provided references
1. Metallic implants with properties and latest production techniques: A review
2. Development of Low Elastic Modulus Titanium Alloys as Implant Biomaterials10.21926/rpm.2202008 ↗
3. β-Titanium based alloys for medical applications
4. Nitinol: From historical milestones to functional properties and biomedical applications10.1177/09544119221123176 ↗
5. Manik, R., and Sahu, M.R. (2022). Biocompatibility of NiTi. Nickel-Titanium Smart Hybrid Materials, Elsevier.10.1016/B978-0-323-91173-3.00004-3 ↗
6. Stent’ in Vitro Degradation Rate and Toxic Degradation Products
7. Characterization of Ti–6Al–(4V–7Nb–4Mo) Biomedical Alloys Produced by Powder Metallurgy Method10.1007/s11106-020-00162-5 ↗
8. Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants
9. Structure and mechanical properties of Ti–6Al–4V alloy after zirconium addition10.1016/j.msea.2012.05.043 ↗
10. Development and properties of dental Ti–Zr binary alloys10.1016/j.jmbbm.2020.104048 ↗
11. Zhao, J., Liu, K., Ding, M., Yin, L., and Liang, S. (2022). Relationship between the Composition and Elastic Modulus of TiZrTa Alloys for Implant Materials. Metals, 12.10.3390/met12101582 ↗
12. Microstructural and tribo-mechanical investigation of as-cast Ti-Zr binary alloys10.1016/j.matpr.2022.06.107 ↗
13. Santos, A., Teixeira, J., Pintão, C., Correa, D., Grandini, C., and Lisboa-Filho, P. (2023). Ti–15Zr and Ti–15Zr–5Mo Biomaterials Alloys: An Analysis of Corrosion and Tribocorrosion Behavior in Phosphate-Buffered Saline Solution. Materials, 16.10.3390/ma16051826 ↗
14. Vacuum sealing-assisted processing of titanium–zirconium alloys: Synthesis, microstructure, hardness, friction, wear, and corrosion studies for biomedical application10.1007/s10853-024-09609-1 ↗
15. Yudin, S., Alimov, I., Volodko, S., Guryanov, A., Markova, G., Kasimtsev, A., Sviridova, T., Permyakova, D., Evstratov, E., and Cheverikin, V. (2023). Fabrication of Biomedical Ti-Zr-Nb by Reducing Metal Oxides with Calcium Hydride. J. Funct. Biomater., 14.10.3390/jfb14050271 ↗
16. Sergienko, K.V., Konushkin, S.V., Kaplan, M.A., Gorbenko, A.D., Guo, Y., Nasakina, E.O., Sudarchikova, M.A., Sevostyanova, T.M., Morozova, Y.A., and Shatova, L.A. (2024). Physical and Mechanical Properties of Ti-Zr-Nb Alloys for Medical Use. Metals, 14.10.3390/met14111311 ↗
17. Sergienko, K.V., Konushkin, S.V., Morozova, Y.A., Kaplan, M.A., Gorbenko, A.D., Rumyantsev, B.A., Prutskov, M.E., Baranov, E.E., Nasakina, E.O., and Sevostyanova, T.M. (2025). Study of the Structure and Mechanical Properties of Ti-38Zr-11Nb Alloy. J. Funct. Biomater., 16.10.20944/preprints202502.1884.v1 ↗
18. Incorporating microstructural and mechanical heterogeneity to Ti–Zr–Nb alloy by partial high-energy ball milling10.1016/j.matchemphys.2024.129037 ↗
19. Crystal Structure, Transformation Strain, and Superelastic Property of Ti–Nb–Zr and Ti–Nb–Ta Alloys10.1007/s40830-015-0022-3 ↗
20. Several Issues in the Development of Ti–Nb-Based Shape Memory Alloys10.1007/s40830-016-0087-7 ↗
21. Arias-González, F., Rodríguez-Contreras, A., Punset, M., Manero, J.M., Barro, Ó., Fernández-Arias, M., Lusquiños, F., Gil, F.J., and Pou, J. (2021). In-situ laser directed energy deposition of biomedical Ti-Nb and Ti-Zr-Nb alloys from elemental powders. Metals, 11.10.3390/met11081205 ↗
22. Study of the microstructure and crystal orientation of as-cast Ti-10.2 Mo-19.5 Nb alloy10.1016/j.matpr.2020.05.785 ↗
23. Kim, K.M., Kim, H.Y., and Miyazaki, S. (2020). Effect of Zr content on phase stability, deformation behavior, and young’s modulus in Ti-Nb-Zr alloys. Materials, 13.10.3390/ma13020476 ↗
24. Morinaga, M., Kato, M., Kamimura, T., Fukumoto, M., Harada, I., and Kubo, K. (July, January 29). Theoretical design of β-type titanium alloys. Proceedings of the 7th International Conference on Titanium, Science and Technology, San Diego, CA, USA.
25. (1991). High-Alloyed Corrosion-Resistant and Heat-Resistant Steels and Alloys. Grades (Standard No. GOST 19807-91). (In Russian).
26. Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction10.1007/s11837-018-3010-1 ↗
27. Korneva, A., Straumal, B., Gornakova, A., Kilmametov, A., Gondek, Ł., Lityńska-Dobrzyńska, L., Chulist, R., Pomorska, M., and Zięba, P. (2022). Formation and Thermal Stability of the ω-Phase in Ti–Nb and Ti–Mo Alloys Subjected to HPT. Materials, 15.10.3390/ma15124136 ↗