journal article·2026-04-01Open access

Towards Sustainable Bone Grafting: Life Cycle Assessment of Donor Cadaver-Derived Allograft (BMG) Production Using a BMP-Preserving Approach

Szidonia Krisztina Veress, Mihai Vlad Golu, Lajos Csönge, Bernadette Kerekes-Máthé, Melinda Székely, Bálint Botond Bögözi

Abstract

Background/Objectives: Healthcare activities contribute significantly to climate change and environmental pollution. The demand for bone grafting is increasing, and the biological properties of bone substitute materials are critically important. A methodology aimed at preserving BMPs may offer an opportunity to improve the biological properties of donor cadaver-derived bone grafts. The aim of this study was to conduct a life cycle assessment of the BMP-preserving approach used in allograft production in order to enhance the environmental sustainability of bone grafting. Methods: Following primary data collection at the West Hungarian Regional Tissue Bank, environmental impacts were assessed using the OpenLCA software and the ReCiPe v1.03 (2016) midpoint and endpoint impact categories. A sensitivity analysis was also conducted under six alternative scenarios to evaluate which changes would have the greatest beneficial effect on environmental impacts. Results: The greatest environmental impacts of allograft production were observed in the categories of material resources: metals and minerals, terrestrial ecotoxicity, and climate change. The climate change impact was 66.759 kg CO2-eq. The environmental impacts of the production process also had a significant influence on human health, with a total DALY value of 6.58 h. The impacts were primarily driven by electricity consumption and the chemicals used; however, in several impact categories, waste management also contributed substantially. Conclusions: Transitioning to more sustainable energy sources (e.g., wind power) would substantially improve the environmental performance of allograft production. Further research is needed to identify more sustainable alternatives for the chemical agents used during processing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Anatomy and Medical Technology · Bone Tissue Engineering Materials · Agriculture Sustainability and Environmental Impact

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Doctoral School of Medicine and Pharmacy, IOSUD, George Emil Palade University of Medicine, Pharmacy, Science, and Technology of Targu Mures, 540142 Targu Mures, Romania

Department of Oral and Maxilo-Facial Surgery, Faculty of Dentistry, George Emil Palade University of Medicine, Pharmacy, Science, and Technology of Targu Mures, 38 Gheorghe Marinescu Str., 540142 Targu Mures, Romania

West-Hungarian Regional Tissue Bank, Petz Aladár University Teaching Hospital, Vasvári P. u. 2-4., 9024 Győr, Hungary

Hisztolabor Kft, Kócsag u.2, 9026 Győr, Hungary

Department of Teeth and Dental Arches Morphology, Faculty of Dentistry, George Emil Palade University of Medicine, Pharmacy, Science, and Technology of Targu Mures, 38 Gheorghe Marinescu Str., 540142 Targu Mures, Romania

References (68)

Show source-provided references
1. Healing of Long-Term Frozen Orthotopic Bone Allografts Is Not Affected by MHC Differences between Donor and Recipient10.1007/s11999-011-1796-z ↗
2. Research Progress of Bone Grafting: A Comprehensive Review10.2147/IJN.S510524 ↗
3. The Use of a Novel Bone Allograft Wash Process to Generate a Biocompatible, Mechanically Stable and Osteoinductive Biological Scaffold for Use in Bone Tissue Engineering10.1002/term.1934 ↗
4. Development of a Growth Factor Bioavailability Enhanced Allograft (GFBA) for Bone Regeneration10.1007/s10561-025-10206-y ↗
5. Retrospective Outcome Analysis of Allogenic Bone Graft
6. Battafarano, G., Rossi, M., De Martino, V., Marampon, F., and Borro, L. (2021). Strategies for Bone Regeneration: From Graft to Tissue Engineering. Int. J. Mol. Sci., 22.10.3390/ijms22031128 ↗
7. Vertical Ridge Augmentation of Atrophic Posterior Mandible with Corticocancellous Onlay Symphysis Graft versus Sandwich Technique: Clinical and Radiographic Analysis10.1007/s10266-023-00794-0 ↗
8. Yeniyol, S., and Özlü Ucan, G. (2025). Short-Term Retrospective Analysis of Radiographic Evaluation of Graft Height Changes after Maxillary Sinus Floor Augmentation with Xenograft and Simultaneous Dental Implant Placement: A Two-Dimensional Radiographic Study. BMC Oral Health, 25.10.1186/s12903-025-07356-6 ↗
9. Alveolar Bone Augmentation Using Octacalcium Phosphate and Collagen Composite with Custom-Made Titanium Mesh: A Case Report10.12659/AJCR.948537 ↗
10. Bone Grafts in Trauma and Orthopaedics
11. Manufacturing Artificial Bone Allografts: A Perspective
12. Rasch, A., Naujokat, H., Wang, F., Seekamp, A., Fuchs, S., and Klüter, T. (2019). Evaluation of Bone Allograft Processing Methods: Impact on Decellularization Efficacy, Biocompatibility and Mesenchymal Stem Cell Functionality. PLoS ONE, 14.10.1371/journal.pone.0218404 ↗
13. Bone Grafts in Periodontics10.4103/MTSM.MTSM_2_19 ↗
14. Moore, M., Samsell, B., and McLean, J. (2019). Allograft Tissue Safety and Technology. Biologics in Orthopaedic Surgery, Elsevier.10.1016/B978-0-323-55140-3.00005-9 ↗
15. Bone Tissue Engineering10.1007/s40610-015-0022-2 ↗
16. Cadaveric Allograft Microbiology10.1007/s00264-004-0579-5 ↗
17. A New Indication for Use of Bone Allografts-A 10-Year Data Analysis10.1007/s43465-023-00953-z ↗
18. Regenerative Medicine: Characterization of Human Bone Matrix Gelatin (BMG) and Folded Platelet-Rich Fibrin (F-PRF) Membranes Alone and in Combination (Sticky Bone)10.1007/s10561-021-09925-9 ↗
19. Humán Liofilizált Csontmátrix-Zselatin Alkalmazása a Szájsebészeti Gyakorlatban (Elözetes Közlemény) [The Use of Human Lyophilized Bone Matrix Gelatin in Oral Surgery (Preliminary Report)]
20. Environmental Sustainability in Intensive Care: The Path Forward. An ESICM Green Paper10.1007/s00134-024-07662-7 ↗
21. Healthcare Resource Allocation and Environmental Sustainability10.1111/bioe.70009 ↗
22. Sustainability Task Force of the French Association of Urology. Climate-Smart Actions in the Operating Theatre for Improving Sustainability Practices: A Systematic Review10.1016/j.eururo.2022.01.027 ↗
23. Potential Impacts to Human Health from Climate Change: A Comparative Life-Cycle Assessment of Single-Use versus Reusable Devices Flexible Ureteroscopes10.1007/s00240-024-01664-2 ↗
24. Environmental Sustainability and MRI: Challenges, Opportunities, and a Call for Action10.1002/jmri.28994 ↗
25. Dolcini, M., Ferrè, F., Brambilla, A., and Capolongo, S. (2025). Integrating Environmental Sustainability into Hospitals Performance Management Systems: A Scoping Review. BMC Health Serv. Res., 25.10.1186/s12913-025-12928-x ↗
26. Environmental Sustainability Initiatives in the Operating Room: A Scoping Review10.1097/AS9.0000000000000451 ↗
27. Environmental Sustainability in Cardiovascular Practice: Current Challenges and Future Directions10.1038/s41569-024-01077-z ↗
28. Environmental Sustainability in Dermatological Surgery. Part 1: Reducing Carbon Intensity10.1093/ced/llae434 ↗
29. Healthcare and Environmental Sustainability10.4103/singaporemedj.SMJ-2024-068 ↗
30. Steps Toward Environmental Sustainability in Interventional Radiology10.1177/08465371251326793 ↗
31. Curriculum Content for Environmental Sustainability in Dentistry10.1016/j.jdent.2024.105021 ↗
32. Environmental Sustainability in Obstetrics and Gynaecology: A Systematic Review10.1111/1471-0528.17637 ↗
33. Climate Change and Environmental Sustainability in Emergency Medicine: A Narrative Review10.21037/atm-25-57 ↗
34. (2026, February 10). Available online: https://Healthcarelca.com/.
35. Considerations of Growth Factor and Material Use in Bone Tissue Engineering Using Biodegradable Scaffolds in Vitro and in Vivo10.1038/s41598-024-75198-3 ↗
36. Bone Grafts, Bone Substitutes and Orthobiologics: The Bridge between Basic Science and Clinical Advancements in Fracture Healing10.4161/org.23306 ↗
37. Ashfaq, R., Kovács, A., Berko, S., and Budai-Szűcs, M. (2024). Developments in Alloplastic Bone Grafts and Barrier Membrane Biomaterials for Periodontal Guided Tissue and Bone Regeneration. Int. J. Mol. Sci., 25.10.3390/ijms25147746 ↗
38. Ciszyński, M., Dominiak, S., Dominiak, M., Gedrange, T., and Hadzik, J. (2023). Allogenic Bone Graft in Dentistry: A Review of Current Trends and Developments. Int. J. Mol. Sci., 24.10.3390/ijms242316598 ↗
39. Novel Strategies for Spatiotemporal and Controlled BMP-2 Delivery in Bone Tissue Engineering10.1177/09636897241276733 ↗
40. The Clinical Use of Allografts, Demineralized Bone Matrices, Synthetic Bone Graft Substitutes and Osteoinductive Growth Factors: A Survey Study10.1007/s11420-005-0111-5 ↗
41. Does Alveolar Ridge Preservation Reduce the Need for Sinus Floor Elevation: A Comparative Study to Spontaneous Healing10.1111/cid.13391 ↗
42. Pogacian-Maier, A., Mester, A., Morariu, R., Campian, R., and Tent, A. (2024). The Use of Allograft Bone in the Lateral Approach of Sinus Floor Elevation: A Systematic Review of Clinical Studies. Medicina, 60.10.3390/medicina60020252 ↗
43. Said Ahmed, W., and Arafa, A. (2025). L- Shape Symphyseal Autogenous Bone Block for Alveolar Ridge Augmentation in Anterior Maxilla and Mandible, a Prospective Single Arm Clinical Study. BMC Oral Health, 25.10.1186/s12903-025-05601-6 ↗
44. Ayman, D., Shawky, M., Aly, L., Mounir, M., and Zekry, A. (2025). Bone Gain and Accuracy Assessment of Computer-Guided Workflow for Horizontal Augmentation of Atrophic Anterior Maxilla with Symphyseal Cortical Plates: A Randomized Controlled Trial. BMC Oral Health, 25.10.1186/s12903-025-06415-2 ↗
45. Proximal Tibia for Alveolar Augmentation and Augmentative Rhinoplasty-a Suitable Option? A Retrospective Clinical Study on Donor and Recipient Site Morbidity10.1186/s13005-024-00470-w ↗
46. Allografts in Periodontal Regeneration10.18689/mjcrs-1000130 ↗
47. Kovac, Z., Cabov, T., Blaskovic, M., and Morelato, L. (2023). Regeneration of Horizontal Bone Defect in Edentulous Maxilla Using the Allogenic Bone-Plate Shell Technique and a Composite Bone Graft-A Case Report. Medicina, 59.10.3390/medicina59030494 ↗
48. Vlasa, A., Bud, E., Lazar, L., Ilies, S., Stoica, A., Lazar, A., Martu, I., and Bud, A. (2025). Systematic Review Regarding the Clinical Implications of Allograft and Alloplastic Bone Substituents Used for Periodontal Regenerative Therapy. J. Clin. Med., 14.10.3390/jcm14030894 ↗
49. Allogeneic and Autogenous Bone Grafts Are Affected by Historical Donor Environmental Exposure10.1007/s11999-015-4572-7 ↗
50. Ferraz, M. (2023). Bone Grafts in Dental Medicine: An Overview of Autografts, Allografts and Synthetic Materials. Materials, 16.10.3390/ma16114117 ↗
51. Xu, X., Xu, P., Liu, S., Yang, Y., Cheng, Y., Zhang, W., Yu, D., and Lu, L. (2025). Clinical Study on Horizontal Bone Augmentation Using an Alveolar Mucosa-Periosteal Bone Flap. BMC Oral Health, 25.10.1186/s12903-025-05539-9 ↗
52. Clinical Efficacy of Two Vertical Soft Tissue Augmentation Techniques for Peri-Implant Crestal Bone Level Stability: A Randomized Clinical Trial10.1111/cid.13365 ↗
53. Environmentally Friendly Behavior in Dentistry10.15386/mpr-2473 ↗
54. Assessing Burden of Disease as Disability Adjusted Life Years in Life Cycle Assessment10.1016/j.scitotenv.2015.05.017 ↗
55. Environmental Sustainability of Post-Orthodontic Dental Retainers: A Comparative Life-Cycle Assessment of Hawley and Essix Retainers10.1093/ejo/cjae012 ↗
56. Environmental Sustainability in the Outpatient Clinic Setting10.1093/ofid/ofae586 ↗
57. The life cycle analysis of a dental examination: Quantifying the environmental burden of an examination in a hypothetical dental practice10.1111/cdoe.12630 ↗
58. Environmental Impact of a Tooth Extraction: Life Cycle Analysis in a University Hospital Setting10.1111/cdoe.70003 ↗
59. Environmental Sustainability: Challenges and Solutions10.1007/s11356-025-36093-0 ↗
60. Social, Economic, and Environmental Sustainability in Assistive Technology10.1080/10400435.2025.2449778 ↗
61. [Translated Article] Environmental Sustainability in Drug Procurement Strategy10.1016/j.farma.2025.04.002 ↗
62. Environmental Sustainability in Dermatological Surgery. Part 2: Reducing Activity and Future Ecological Strategies10.1093/ced/llae470 ↗
63. Veress, S., Bögözi, B., Csönge, L., Kerekes-Máthé, B., and Székely, M. (2026). Recycling of Medical Waste in the Circular Economy: LCA Analysis of the Production of Bone Allografts from Femoral Heads Used in Dental Implantology. Prosthesis, 8.10.3390/prosthesis8020014 ↗
64. Structural Bone Allograft Combined with Genetically Engineered Mesenchymal Stem Cells as a Novel Platform for Bone Tissue Engineering10.1089/ten.2006.0182 ↗
65. Mahmood Environmental Impact for 3D Bone Tissue Engineering Scaffolds Life Cycle: An Assessment10.33263/BRIAC125.65046515 ↗
66. Tajurahim, N., Mahmood, S., Saman, M., and Ngadiman, N. (2021). Life Cycle Assessment of 3D-Printed Bone Tissue Engineering Scaffolds. Research Square.10.21203/rs.3.rs-497484/v1 ↗
67. Senusi, F., Mahmood, S., Ngadiman, N.H.A., and Mat Saman, M.Z. (2022). Application of GaBi Software in Identifying Potential Environmental Impacts in Fabrication of 3D Bone Tissue Engineering. Proceedings of the ICE-SEAM 2021: Special Edition, UTeM Press.
68. Informed consent and ethics committee approval in laboratory medicine10.11613/BM.2018.030201 ↗