journal article·2026-02-24Open access

The Influence of Orthodontic Bracket Base Design and Bonding System on Shear Bond Strength

Maria Manuela Nardin, Alin Gabriel Ionescu, Alexandra Elena Done, Cosmin Mihai Mirițoiu, Paula Adriana Pădeanu, Anne Marie Rauten, Luminița Dăguci, Cristina Teodora Preoteasa, Veronica Mercuț

Abstract

The success of orthodontic therapy depends on the effective, continuous application of forces to teeth. Therefore, an essential element of the treatment is the adhesion between the bracket and enamel. The purpose of this study was to evaluate the influence of bracket base design and bonding system on shear bond strength. The study was conducted on eighty extracted premolars which were randomly divided into four groups of twenty teeth each, using two types of metal brackets (80-gauge mesh and anchor pylons base design) and two types of bonding systems (conventional and self-etching). The combination of bracket and bonding system resulted in four distinct configurations of bracket bonding, with each configuration tested on twenty teeth. Shear bond strength testing was performed using a Laryee Universal Testing Machine. The obtained values were statistically analyzed. Slightly higher shear bond strength values were recorded for brackets with anchor pylons bonded using the conventional bonding system (13.32 ± 4.20 N/mm2), whereas the lowest values were recorded for the same bracket base design bonded with the self-etching system (11.10 ± 4.50 N/mm2). Nevertheless, ANOVA test did not reveal statistically significant differences between the two bracket types or between the two bonding techniques in terms of shear bond strength and force values and no significant interaction effects were observed. Considering the obtained results, several additional factors must be taken into account when evaluating the shear bond strength of orthodontic brackets.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Orthodontics and Dentofacial Orthopedics · Occupational health in dentistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prosthetic Dentistry, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of History of Medicine, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of Scientific Research Methods-Ergonomics, Faculty of Dentistry, “Carol Davila” University of Medicine and Pharmacy, 020021 Bucharest, Romania

Department of Applied Mechanics and Civil Constructions, Faculty of Mechanics, University of Craiova, 200585 Craiova, Romania

Department of Orthodontics, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Funding

The Ministry of Investments and European Projects · Health Program · DOCMED+ · European Social Fund Plus

References (89)

Show source-provided references
1. Has the COVID-19 Pandemic Affected Orthodontist’s Interest in Various Orthodontic Appliances?10.4274/TurkJOrthod.2023.2022.124 ↗
2. Khan, H. (2015). Orthodontic Brackets: Selection, Placement and Debonding, CreateSpace Independent Publishing Platform.
3. The evolution of bonding in orthodontics10.1016/j.ajodo.2015.01.011 ↗
4. Classification review of dental adhesive systems: From the IV generation to the universal type
5. Biomimetically emulating nature utilizing a histo-anatomic approach: Structural analysis
6. Biomimetically emulating nature utilizing a histoanatomic approach: Visual synthesis
7. Singer, L., Fouda, A., and Bourauel, C. (2023). Biomimetic approaches and materials in restorative and regenerative dentistry: Review article. BMC Oral Health, 23.10.1186/s12903-023-02808-3 ↗
8. Zafar, M.S., Amin, F., Fareed, M.A., Ghabbani, H., Riaz, S., Khurshid, Z., and Kumar, N. (2020). Biomimetic Aspects of Restorative Dentistry Biomaterials. Biomimetics, 5.10.3390/biomimetics5030034 ↗
9. Effect of Bioactive Adhesives on Shear Bond Strength at the Enamel-Orthodontic Bracket Interface10.47310/jpms2025140205 ↗
10. Giomers in dentistry—At the boundary between dental composites and glass-ionomers10.15386/mpr-1169 ↗
11. Orthodontic Bonding: Review of the Literature10.1155/2020/8874909 ↗
12. Failure patterns of different bracket systems and their influence on treatment duration: A retrospective cohort study10.2319/081817-559.1 ↗
13. Bracket Failure in Orthodontic Patients: The Incidence and the Influence of Different Factors10.1155/2022/5128870 ↗
14. Barriers and challenges faced by orthodontists in providing orthodontic care and implementing new innovative technologies in the field of orthodontics among children and adults: A qualitative study
15. Comparison of Shear Bond Strength of Four Types of Orthodontic Brackets with Different Base Technologies10.4103/apos.apos_91_17 ↗
16. The effect of variation in mesh-base design on the shear bond strength of orthodontic brackets
17. Assessment of bracket bond failure during fixed orthodontic treatment based on a questionnaire distributed to orthodontists
18. Predicting the bracket bond failure rate in orthodontic patients: A retrospective cohort study10.1016/j.ortho.2019.03.002 ↗
19. Kazlauskaitė, G., Vaitiekūnas, R., Lopatienė, K., Jutas, A., Palesik, B., and Smailienė, D. (2025). The impact of temperature on the shear bond strength of conventional multi-step and self-adhesive orthodontic adhesive systems: An in-vitro study. BMC Oral Health, 25.10.1186/s12903-025-05515-3 ↗
20. A Clinical Comparison of Failure Rates of Metallic and Ceramic Brackets: A Twelve-Month Study10.1155/2020/9725101 ↗
21. A retrospective survey of the causes of bracket- and tube-bonding failures10.2319/021616-136.1 ↗
22. A Cross-Sectional Study of Different Orthodontic Brackets Debonding Techniques Used in the Arab Region
23. A study of the mechanical properties of as-received and intraorally exposed single-crystal and polycrystalline orthodontic ceramic brackets
24. Enamel Thickness before and after Orthodontic Treatment Analysed in Optical Coherence Tomography10.1155/2017/8390575 ↗
25. Corrosion of orthodontic brackets: Qualitative and quantitative surface analysis10.2319/072321-584.1 ↗
26. Variations in orthodontic bracket retention related to base design. Comparison of foil mesh and anchor pylons brackets10.5604/00114553.1230589 ↗
27. Orthodontic Molar Brackets: The Effect of Three Different Base Designs on Shear Bond Strength10.59566/IJBS.2011.7027 ↗
28. Nawrocka, A., Nowak, J., Sauro, S., Hardan, L., Bourgi, R., and Lukomska-Szymanska, M. (2023). Shear Bond Strength of Metal and Ceramic Brackets Depending on Etching Protocol in Direct Bonding Technique. Materials, 16.10.3390/ma16206697 ↗
29. Phosphoric acid incorporated with acidulated phosphate fluoride gel etchant effects on bracket bonding
30. State of the art etch-and-rinse adhesives10.1016/j.dental.2010.10.016 ↗
31. Bourgi, R., Kharouf, N., Cuevas-Suárez, C.E., Lukomska-Szymanska, M., Haikel, Y., and Hardan, L. (2024). A Literature Review of Adhesive Systems in Dentistry: Key Components and Their Clinical Applications. Appl. Sci., 14.10.3390/app14188111 ↗
32. From Buonocore’s Pioneering Acid-Etch Technique to Self-Adhering Restoratives: A Status Perspective of Rapidly Advancing Dental Adhesive Technology
33. Strategies to prevent hydrolytic degradation of the hybrid layer—A review10.1016/j.dental.2013.07.016 ↗
34. State of the art of self-etch adhesives10.1016/j.dental.2010.10.023 ↗
35. Comparison of shear bond strength of orthodontic brackets bonded with a universal adhesive using different etching methods10.1590/2177-6709.24.4.33.e1-8.onl ↗
36. Self-etch primers and conventional acid-etch technique for orthodontic bonding: A systematic review and meta-analysis10.1016/j.ajodo.2012.02.023 ↗
37. An in Vitro Study to Compare the Shear Bond Strength of Orthodontic Brackets Bonded to Permanent Teeth by Using Conventional Acid-Etching and Self-Etching Primers10.4103/denthyp.denthyp_41_21 ↗
38. Shear bond strength and debonding characteristics of metal and ceramic brackets bonded with conventional acid-etch and self-etch primer systems: An in-vivo study
39. Enamel shear bond strength of different primers combined with an orthodontic adhesive paste10.1515/bmt-2016-0241 ↗
40. Comparative analysis of shear bond strength and debonding characteristics of bioactive versus conventional orthodontic adhesives: An in-vitro study10.1007/s44445-025-00002-5 ↗
41. A Comparison of the Shear Bond Strength of Orthodontic Brackets Bonded with Different Orthodontic Adhesives
42. Comparison of adhesion forces developed by foil mesh of various dimensions applied in combination with composites of different viscosity
43. A Comparison of the Shear Bond Strength of Conventional Acid Etching, Self-Etching Primer, and Single Bottle Self-Adhesive—An In vitro Study10.4103/IJDS.IJDS_66_17 ↗
44. A comparison of shear bond strength of orthodontic brackets bonded with four different orthodontic adhesives10.4103/2278-0203.132892 ↗
45. Original Research Assessment of shear bond strength of orthodontic brackets using direct and in-direct bonding methods
46. Evaluation of antibacterial properties and shear bond strength of orthodontic composites containing silver nanoparticles, titanium dioxide nanoparticles and fluoride: An in vitro study10.1590/2177-6709.27.5.e222067.oar ↗
47. Shear bond strength of orthodontic brackets bonded with a new self-adhering flowable resin composite10.1007/s00784-012-0729-x ↗
48. Effect of a self-etch primer/adhesive on the shear bond strength of orthodontic brackets10.1067/mod.2001.113269 ↗
49. 3M (2019). 3M Unitek Transbond XT Primer (712-034) Safety Data Sheet, 3M.
50. 3M (2020). 3M Unitek Transbond Plus Self Etching Primer (712-090, 712-091) Safety Data Sheet SECTION 1: Identification 1.1. Product Identifier 3M Unitek Transbond Plus Self Etching Primer, 3M.
51. Evaluation of shear bond strength of orthodontic adhesives with integrated primer: A comparative study10.25259/APOS_218_2022 ↗
52. Comparative evaluation of shear bond strength and debonding properties of GC Ortho Connect composite and Transbond XT composite10.2478/aoj-2023-0004 ↗
53. Evaluation of Shear Bond Strength of a Primer Incorporated Orthodontic Composite Resin: An In-Vitro Study
54. (2017). Designation Systems for Steels Part 1: Steel Names. Standard No. SR EN 10027-1. Available online: https://www.scribd.com/document/915329863/SR-EN-10027-1-2017e-pdf.
55. (2013). Dentistry, Adhesion, Notched-Edge Shear Bond Strength Test(E) (Standard No. ISO 29022:2013).
56. Effects of different primers and colouring solutions on orthodontic bonding: Shear bond strength and colour change10.1007/s00784-024-05665-8 ↗
57. EL-Awady, A.A., ElHabbak, K.S., Mohamed, H.R., Elwan, A.E., Adly, K.S., Abdalla, M.A., Kamal, E.M., and Alameldin, A.L. (2024). Effect of Different Primers on the Shear Bond Strength of Orthodontic Brackets Bonded to Reinforced Polyetheretherketone (PEEK) Substrate. Dent. J., 12.10.3390/dj12060188 ↗
58. InformedHealth.org. Cologne, Germany: Institute for Quality and Efficiency in Health Care (IQWiG) (2025, July 07). 2006. Overview: Misaligned Teeth and Jaws. [Updated 2023 February 13], Available online: https://www.ncbi.nlm.nih.gov/books/NBK553375/.
59. Association between malocclu-sion, tongue position and speech distortion in mixed-dentition schoolchildren: An epidemiological study10.1590/1678-7757-2020-1005 ↗
60. Effect of malocclusion on jaw motor function and chewing in chil-dren: A systematic review10.1007/s00784-021-04356-y ↗
61. Beneficial effects of orthodontic treatment on quality of life in patients with malocclusion10.1620/tjem.214.39 ↗
62. Prevalence of malocclusion and its relationship with socio-demographic factors, dental caries, and oral hygiene in 12- to 14-year-old Tanzanian schoolchildren10.1093/ejo/cjn125 ↗
63. In vitro analysis of shear bond strength and adhesive remnant index of different metal brackets10.1590/2177-6709.21.6.067-073.oar ↗
64. The influence of surface finish and in-vitro pellicle on contact-angle measurement and surface morphology of three commercially available composite restoratives10.1111/j.1365-2842.1992.tb01593.x ↗
65. Catechol-thiol-based dental adhesive inspired by underwater mussel adhesion10.1016/j.actbio.2019.12.002 ↗
66. Robust Janus Hydrogel with Wet-Tissue Adhesive Properties for Wound Dressing and Anti-Postoperative Adhesion10.1021/acsabm.5c00118 ↗
67. Shear bond strength of three different metal bracket base designs on human premolars: An in vitro comparative study
68. Influence of surface conditioning on ceramic microstructure and bracket adhesion10.1093/ejo/cjr034 ↗
69. Orthodontics: Bracket Materials, Adhesives Systems, and Their Bond Strength10.1155/2016/1329814 ↗
70. Comparative Evaluation of Shear Bond Strength of Brackets Bonded with self Etch Primer/Adhesive and Conventional Etch/Primer and Adhesive System10.4103/jpbs.jpbs_412_21 ↗
71. Comparison of Self-Etch Primers with Conventional Acid Etching System on Orthodontic Brackets
72. Comparison of Shear Bond Strength of Three Self-etching Adhesives: An In-Vitro Study
73. A Comparison of Shear Bond Strength and Debonding Characteristics of Conventional, Moisture-Insensitive, and Self-etching Primers In Vitro
74. Effect of blood contamination on shear bond strength of brackets bonded with conventional and self-etching primers10.1016/j.ajodo.2003.09.022 ↗
75. Effect of saliva contamination and cleansing solutions on the bond strengths of self-etch adhesives to dentin10.1111/j.1708-8240.2010.00374.x ↗
76. Effect of blood contamination and de-contamination procedures on marginal adaptation and bond strength of composite restorations
77. Blood contamination effect on shear bond strength of an orthodontic hydrophilic resin10.1590/S1678-77572012000100016 ↗
78. Effect of moisture, saliva, and blood contamination on the shear bond strength of brackets bonded with a conventional bonding system and self-etched bonding system10.4103/0976-9668.127305 ↗
79. The influence of bracket base design on the strength of the bracket-cement in-terface10.1179/ortho.27.3.249 ↗
80. Comparison of bond strength between simple foil mesh and laser-structured base retention brackets10.1067/mod.2002.125834 ↗
81. Effect of orthodontic bracket base structure on shear bond strength
82. Brackets Mesh Changing Trends: A Review
83. Shear bond strength of orthodontic brackets to fluorosed enamel
84. Anicic, M.S., Goracci, C., Juloski, J., Miletic, I., and Mestrovic, S. (2020). The Influence of Resin Infiltration Pretreatment on Orthodontic Bonding to Demineralized Human Enamel. Appl. Sci., 10.10.3390/app10103619 ↗
85. Kiryk, S., Kiryk, J., Matys, J., and Dobrzyński, M. (2025). The Influence of Resin Infiltration on the Shear Bond Strength of Orthodontic Brackets: A Systematic Review and Meta-Analysis. J. Funct. Biomater., 16.10.3390/jfb16010032 ↗
86. Microleakage and shear bond strength of orthodontic brackets bonded to hypomineralized enamel following different surface preparations10.4317/jced.51254 ↗
87. The Influence of No-Primer Adhesives and Anchor Pylons Bracket Bases on Shear Bond Strength of Orthodontic Brackets10.1155/2013/315023 ↗
88. Brantley, W.A., and Eliades, T. (2001). Orthodontic Materials: Scientific and Clinical Aspects, Thieme.10.1055/b-002-43889 ↗
89. In-vitro orthodontic bond strength testing: A systematic review and meta-analysis10.1016/j.ajodo.2009.12.021 ↗