Effect of Printing Orientation on the Dimensional Accuracy of 3D-Printed Denture Base
Source abstract
Abstract
Additive manufacturing is now an integral part of digital prosthodontic workflows, and although stereolithography (SLA) is widely used for denture base fabrication, the dimensional accuracy of printed dentures remains highly dependent on manufacturing parameters, particularly build orientation. This study evaluated the influence of build orientation on the trueness and precision of SLA-printed maxillary and mandibular denture bases. Thirty complete denture bases were fabricated using SLA and divided into three groups according to build orientation: 0°, 45°, and 90° (n = 10). The intaglio surfaces of the printed dentures were scanned and compared with their corresponding digital reference models using three-dimensional inspection software. Trueness was quantified using root mean square error (RMSE) and directional deviations, while precision was assessed based on the variability of RMSE values within each group. Statistical analysis was performed using one-way ANOVA and Tukey’s post hoc test (p ≤ 0.05). Build orientation significantly affected the trueness of maxillary denture bases, with dentures printed at 90° demonstrating the lowest RMSE values. No statistically significant differences in trueness were observed among build orientations for mandibular denture bases. Precision was not influenced by build orientation for maxillary dentures, whereas mandibular dentures printed at 90° exhibited significantly greater variability compared with 0° and 45°. Build orientation is a critical factor influencing the dimensional accuracy of SLA-printed denture bases in an arch-dependent manner. Optimizing build orientation may enhance both accuracy and reproducibility, thereby improving the predictability and clinical reliability of additively manufactured denture bases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies · Anatomy and Medical Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University of Sofia, 1000 Sofia, Bulgaria
Department of Physics and Biophysics, Medical University of Sofia, 1000 Sofia, Bulgaria
References (26)
Show source-provided references
1. Prevalence and applications of 3-dimensional printers in dental practice10.1016/j.adaj.2023.02.004 ↗
2. Additive Manufacturing for Complete Denture Fabrication: A Narrative Review10.1111/jopr.13426 ↗
3. Mubaraki, M.Q., Moaleem, M.M.A., Alzahrani, A.H., Shariff, M., Alqahtani, S.M., Porwal, A., Al-Sanabani, F.A., Bhandi, S., Tribst, J.P.M., and Heboyan, A. (2022). Assessment of Conventionally and Digitally Fabricated Complete Dentures: A Comprehensive Review. Materials, 15.10.3390/ma15113868 ↗
4. Accuracy and fit of removable partial denture frameworks fabricated by digital technologies: A systematic review
5. Modern 3D printing materials in prosthetic dentistry
6. Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application10.1016/j.dental.2022.09.006 ↗
7. 3D printing parameters, supporting structures, slicing, and post-processing procedures of vat-polymerization additive manufacturing technologies: A narrative review10.1016/j.jdent.2021.103630 ↗
8. Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin10.1016/j.dental.2018.09.011 ↗
9. Effect of post-curing light exposure time on the physico-mechanical properties and cytotoxicity of 3D-printed denture base material10.1016/j.dental.2021.10.011 ↗
10. Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology10.11607/ijp.4835 ↗
11. Effect of build orientation and layer thickness on manufacturing accuracy, printing time, and material consumption of 3D printed complete denture bases10.1016/j.jdent.2023.104435 ↗
12. Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry10.1111/jopr.12801 ↗
13. Hada, T., Kanazawa, M., Iwaki, M., Arakida, T., Soeda, Y., Katheng, A., Otake, R., and Minakuchi, S. (2020). Effect of Printing Direction on the Accuracy of 3D-Printed Dentures Using Stereolithography Technology. Materials, 13.10.3390/ma13153405 ↗
14. (1994). Accuracy (Trueness and Precision) of Measurement Methods and Results—Part 1: General Principles and Definitions (Standard No. ISO 5725-1:1994).
15. AlGhamdi, M.A., and Gad, M.M. (2024). Impact of Printing Orientation on the Accuracy of Additively Fabricated Denture Base Materials: A Systematic Review. Dent. J., 12.10.3390/dj12070230 ↗
16. Evaluation of the influence of different build angles on the surface characteristics, accuracy, and dimensional stability of the complete denture base printed by digital light processing10.1016/j.heliyon.2024.e24095 ↗
17. Printing accuracy, mechanical properties, and surface characteristics of 3D-printed resin materials depending on printing orientation and post-curing method10.1016/j.prosdent.2019.05.034 ↗
18. The effect of build angle on the tissue surface adaptation of maxillary and mandibular complete denture bases manufactured by digital light processing10.1016/j.prosdent.2018.12.014 ↗
19. Trueness and fitting accuracy of maxillary 3D printed complete dentures10.2186/jpr.JPR_D_20_00240 ↗
20. Trueness assessment of additively manufactured maxillary complete denture bases produced at different orientations10.1016/j.prosdent.2021.12.025 ↗
21. Kim, H., Son, K., Kim, S.-Y., and Lee, K.-B. (2025). Comparison of the Trueness of Complete Dentures Fabricated Using Liquid Crystal Display 3D Printing According to Build Angle and Natural Light Exposure. J. Funct. Biomater., 16.10.3390/jfb16080277 ↗
22. Shin, S.-H., Doh, R.-M., Lim, J.-H., Kwon, J.-S., Shim, J.-S., and Kim, J.-E. (2021). Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study. Materials, 14.10.3390/ma14206185 ↗
23. Dzhondrova, I., Liondev, I., Taneva, I., Bogdanov, T., Uzunov, T., and Kirov, D. (2026). Effect of Printing Orientation and Post-Curing Time on the Mechanical Properties of 3D-Printed Denture Base Resin. J. Funct. Biomater., 17.10.3390/jfb17030109 ↗
24. A Digital Technique to Replicate Edentulous Arches with Functional Borders and Accurate Maxillomandibular Relationship for Digital Complete Denture10.1111/jopr.13154 ↗
25. Physical-mechanical properties and accuracy of additively manufactured resin denture bases: Impact of printing orientation10.2186/jpr.JPR_D_24_00263 ↗
26. A comparative evaluation of retention of record bases fabricated digitally in various types of posterior palatal seal area10.1016/j.jobcr.2024.11.004 ↗