journal article·2026-02-14Open access

Structure–Property–Function Evaluation of a β-Type Ti-Nb-Zr Alloy for Dental Implant Applications with Short-Term Clinical Validation

Deukwon Jo, Soo-Hwan Byun, Sang-Yoon Park, Jong-Hee Kim, Mijoo Kim, Hyo-Jung Lee, Young-Kyun Kim, Byoung-Eun Yang, Yang-Jin Yi

Abstract

Titanium-based alloys are widely used in dental implantology; however, the mechanical limitations of commercially pure titanium (cpTi) and unresolved concerns regarding stress shielding remain. This study evaluated the structure–property–function relationship of a novel β-type titanium-niobium-zirconium (Ti-Nb-Zr; TNZ) alloy for dental implant applications. Laboratory testing assessed the elemental composition, tensile properties, and fatigue resistance of the cpTi, compared with modified Grade 4 cpTi (MG4T). In parallel, a randomized, single-blind, controlled clinical trial was conducted over 12 months to compare the clinical performance of TNZ and MG4T implants under functional loading. A total of 80 participants (mean age: 54.2 years; 43 females, 37 males) were enrolled, with 77 completing the 12-month follow-up (TNZ: n = 38; MG4T: n = 39). Clinical outcomes included implant success and survival, peri-implant soft tissue parameters, marginal bone levels, fractal dimension (FD) analysis of trabecular bone, and adverse events. TNZ implants demonstrated superior fatigue resistance without an increase in the elastic modulus relative to MG4T. Clinically, both groups achieved 100% implant success and survival, with no implant-related adverse events. FD analysis revealed time-dependent bone remodeling without evidence of pathological adaptation. These findings support the functional viability of TNZ as a mechanically robust, biocompatible implant material. Further long-term, multicenter trials are warranted to confirm sustained clinical benefits and broader applicability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Section of Restorative Dentistry, Division of Preventive and Restorative Sciences, Los Angeles School of Dentistry, University of California, 714 Tiverton, Los Angeles, CA 90095, USA

Department of Oral and Maxillofacial Surgery, Hallym University Sacred Heart Hospital, Anyang 14066, Republic of Korea

Dental AI-Robotics Center, Hallym University Sacred Heart Hospital, Anyang 14066, Republic of Korea

Department of Artificial Intelligence and Robotics in Dentistry, Graduate School of Clinical Dentistry, Hallym University, Chuncheon 24252, Republic of Korea

Department of Prosthodontics, Section of Dentistry, Seoul National University Bundang Hospital, Seongnam 13620, Republic of Korea

Department of Periodontology, Section of Dentistry, Seoul National University Bundang Hospital, Seongnam 13620, Republic of Korea

K Oral and Maxillofacial Surgery Dental Private Office, Seongnam 13637, Republic of Korea

Department of Dentistry & Dental Research Institute, School of Dentistry, Seoul National University, Seoul 03080, Republic of Korea

References (63)

Show source-provided references
1. Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants?10.1016/j.msec.2016.10.025 ↗
2. Nicholson, J.W. (2020). Titanium alloys for dental implants: A review. Prosthesis, 2.10.3390/prosthesis2020011 ↗
3. Recent advances and prospects in β-type titanium alloys for dental implants applications10.1021/acsbiomaterials.4c00963 ↗
4. Synergistic interactions between corrosion and wear at titanium-based dental implant connections: A scoping review10.1111/jre.12469 ↗
5. Mechanical and clinical properties of titanium and titanium-based alloys (Ti G2, Ti G4 cold worked nanostructured and Ti G5) for biomedical applications10.1016/j.jmrt.2018.07.016 ↗
6. Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants10.1016/j.dental.2014.10.002 ↗
7. A review in titanium-zirconium binary alloy for use in dental implants: Is there an ideal Ti-Zr composing ratio?10.1016/j.jdsr.2023.01.002 ↗
8. Differences in titanium, titanium-zirconium, zirconia implants treatment outcomes: A systematic literature review and meta-analysis10.5037/jomr.2023.14301 ↗
9. Reliability and failure modes of narrow implant systems10.1007/s00784-015-1636-8 ↗
10. Effect of Dental Implant Diameter on Fatigue Performance. Part I: Mechanical Behavior10.1111/j.1708-8208.2012.00477.x ↗
11. Implantoplasty and the risk of fracture of narrow implants with advanced bone loss: A laboratory study10.1111/clr.14132 ↗
12. Design of dental implants at materials level: An overview10.1002/jbm.a.36931 ↗
13. Dental implant materials: Commercially pure titanium and titanium alloys10.1111/j.1532-849X.1999.tb00006.x ↗
14. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
15. Mechanical biocompatibilities of titanium alloys for biomedical applications10.1016/j.jmbbm.2007.07.001 ↗
16. Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices10.1016/j.actbio.2015.03.023 ↗
17. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗
18. Bone ingrowth and stress shielding with a porous surface coated fracture fixation plate10.1002/jbm.820130510 ↗
19. Effects of fit and bonding characteristics of femoral stems on adaptive bone remodeling10.1115/1.2895789 ↗
20. On stress/strain shielding and the material stiffness paradigm for dental implants10.1111/cid.12509 ↗
21. Lack of integration of smooth titanium surfaces: A working hypothesis based on strains generated in the surrounding bone10.1034/j.1600-0501.1999.100601.x ↗
22. Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth10.1007/s10266-024-00942-0 ↗
23. Sergienko, K.V., Konushkin, S.V., Kaplan, M.A., Gorbenko, A.D., Guo, Y., Nasakina, E.O., Sudarchikova, M.A., Sevostyanova, T.M., Morozova, Y.A., and Shatova, L.A. (2024). Physical and Mechanical Properties of Ti-Zr-Nb Alloys for Medical Use. Metals, 14.10.3390/met14111311 ↗
24. Titanium alloys in total joint replacement—A materials science perspective10.1016/S0142-9612(97)00146-4 ↗
25. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation10.1016/S0142-9612(97)00073-2 ↗
26. (2022). Standard Test Method for Tension Testing of Metallic Materials (Standard No. E8/E8M-22).
27. (2017). Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus (Standard No. ASTM E111-17).
28. Full deflection profile calculation and Young’s modulus optimisation for engineered high performance materials10.1038/srep46190 ↗
29. Shemtov-Yona, K., and Rittel, D. (2016). Fatigue of dental implants: Facts and fallacies. Dent. J., 4.10.3390/dj4020016 ↗
30. (2016). Dentistry Implants Dynamic Loading Fatigue Test for Endousseous Dental Implants (Standard No. ISO 14801).
31. Venugopal, B., Chandran, S., and Ajit, A. (2022). ISO 11137: An Overview on Radiation for Sterilization of Medical Devices and Healthcare Products. Medical Device Guidelines and Regulations Handbook, Springer.10.1007/978-3-030-91855-2_8 ↗
32. Long-term implant prognosis in patients with and without a history of chronic periodontitis: A 10-year prospective cohort study of the ITI® Dental Implant System10.1034/j.1600-0501.000.00934.x ↗
33. Success and survival rates of narrow diameter implants made of titanium–zirconium alloy in the posterior region of the jaws–results from a 1-year follow-up10.1111/clr.12113 ↗
34. Comparison of diagnostic accuracy of conventional intraoral periapical and direct digital radiographs in detecting interdental bone loss
35. Are intraoral radiographs reliable in determining peri-implant marginal bone level changes? The correlation between open surgical measurements and peri-apical radiographs10.1016/j.ijom.2018.05.018 ↗
36. The accuracy and reliability of radiographic methods for the assessment of marginal bone level around oral implants10.1038/sj/dmfr/4600694 ↗
37. Validity of radiographic measurement of interproximal bone loss10.1016/S1079-2104(98)90406-1 ↗
38. Accuracy of computer-assisted radiographic measurement of interproximal bone loss in vertical bone defects10.1067/moe.2002.126909 ↗
39. The effects of local factors on the survival of dental implants: A 19 year retrospective study10.4047/jkap.2010.48.1.28 ↗
40. Marginal bone response of implants with platform switching and non-platform switching abutments in posterior healed sites: A 1-year prospective study10.1111/clr.12312 ↗
41. Five-to six-year results of a prospective clinical trial using the ENDOPORE® dental implant and a mandibular overdenture10.1034/j.1600-0501.1999.100203.x ↗
42. Alterations of the trabecular pattern of the jaws in patients with osteoporosis10.1016/S1079-2104(99)70097-1 ↗
43. Finite element analysis of stress extent at peri-implant bone surrounding external hexagon or Morse taper implants10.1016/j.jmbbm.2017.03.011 ↗
44. Three-Dimensional Finite Element Analysis of the Effect of Endosteal Implants with Different Macro Designs on Stress Distribution in Different Bone Qualities10.11607/jomi.7058 ↗
45. Han, S.-H., Kim, N.J., Park, W.-J., and Park, J.-B. (2024). Evaluation of the Differences in the Stability of Alveolar Bone around Dental Implant and Implant Failure between Platform Matching and Platform Switching: A Systematic Review and Meta-Analysis. Appl. Sci., 14.10.3390/app14124975 ↗
46. Marginal bone loss around implants with platform switching and platform matched connection: A systematic review10.1016/j.prosdent.2023.09.009 ↗
47. Stability of tapered and parallel-walled dental implants: A systematic review and meta-analysis10.1111/cid.12623 ↗
48. Primary stability and osseointegration comparing a novel tapered design tissue-level implant with a parallel design tissue-level implant. An experimental in vivo study10.1111/clr.14301 ↗
49. Surface topography steer soft tissue response and antibacterial function at the transmucosal region of titanium implant10.2147/IJN.S461549 ↗
50. Romero, M., Romero-Ruiz, M.M., Rios-Santos, J.V., Rios-Carrasco, B., Herrero-Climent, M., Brizuela-Velasco, A., Martínez-Lopez, J., and Gil, J. (2025). The Topography of Titanium in Dental Implants: Key to Osseointegration and Bactericidal Capacity. Materials, 18.10.3390/ma18143368 ↗
51. Improved mechanical and biological properties of Ti-13Nb-13Zr alloy treated by surface ultrasonic rolling and copper infiltration10.1016/j.mtcomm.2024.108146 ↗
52. Pala, E., Ozdemir, I., Grund, T., and Lampke, T. (2023). The Influence of Design on Stress Concentration Reduction in Dental Implant Systems Using the Finite Element Method. Crystals, 14.10.20944/preprints202311.1635.v1 ↗
53. Impact of platform switching on marginal peri-implant bone-level changes. A systematic review and meta-analysis10.1111/clr.12339 ↗
54. Use of fractal analysis in dental images: A systematic review10.1259/dmfr.20180457 ↗
55. Fractal analysis of dental radiographs to detect periodontitis-induced trabecular changes10.1111/j.1600-0765.2007.01056.x ↗
56. Technical factors in fractal analysis of periapical radiographs10.1259/dmfr/30969642 ↗
57. The long-term efficacy of currently used dental implants: A review and proposed criteria of success
58. Fractal analysis of mandibular bony healing after orthognathic surgery10.1067/moe.2002.128972 ↗
59. Alveolar bone resorption following coronal versus apical approach in a mucoperiosteal flap surgery procedure in the rat mandible10.1902/jop.2001.72.10.1348 ↗
60. Elevation of a full-thickness mucoperiosteal flap alone accelerates orthodontic tooth movement10.1016/j.ajodo.2016.11.026 ↗
61. Assessment of stress shielding around a dental implant for variation of implant stiffness and parafunctional loading using finite element analysis
62. Karakurt, E.M., Cetin, Y., Incesu, A., Demirtas, H., Kaya, M., Yildizhan, Y., Tosun, M., and Huang, Y. (2023). Microstructural, biomechanical, and in vitro studies of Ti-Nb-Zr alloys fabricated by powder metallurgy. Materials, 16.10.3390/ma16124240 ↗
63. Okazaki, Y., and Katsuda, S.-i. (2021). Biological safety evaluation and surface modification of biocompatible ti–15Zr–4Nb alloy. Materials, 14.10.3390/ma14040731 ↗