journal article·2026-01-29Open access

Osteogenic Potential of 3D Bioprinted Collagen Scaffolds Enriched with Bone Marrow Stromal Cells, BMP-2, and Hydroxyapatite in a Rabbit Calvarial Defect Model

Diyana Vladova, Yordan Sbirkov, Elena Stoyanova, Tsvetan Chaprazov, Kiril K. Dimitrov, Hristo Hristov, Dimitar Kostov, Petya Veleva, Daniela Stoeva, Victoria Sarafian

Abstract

This study investigates the effect of three-dimensional (3D) bioprinted collagen (Col) scaffolds (2% w/v collagen) loaded with autologous bone marrow stromal cells (BMSCs) and enriched with bone morphogenetic protein-2 (BMP-2) and hydroxyapatite-based particles (HAPPs) on bone regeneration in calvarial defects in rabbits. Three implant formulations, Col-(BMP-2) (at a concentration of 80 ng/mL), Col-HAPP (1% w/v) and a mixture of the two—Col-(BMP-2)-HAPP (40 ng/mL final concentration and 0.5% HAPP), were compared with a control group C-Per containing only periosteum to assess the influence of material structure, biochemical signals and cell component on osteogenesis. Histological analysis and quantitative computed tomography (CT) imaging parameters (HU values and residual defect diameter) showed significant differences between the groups, highlighting the role of combined strategies for optimal bone repair. The control group demonstrated the weakest regeneration, expressed by minimal lamellar bone and the largest residual defect. Col-(BMP-2) stimulated moderate osteoinduction with active osteoblasts but without a fully organised lamellar structure. Col-HAΡΡ provided more advanced regeneration, with histologically observed thick osteoid lamellae, early calcification, and structured lamellar architecture, emphasising the osteoconductive role of HAΡΡs. The strongest regeneration was reported with Col-(BMP-2)-HAΡΡ, where the synergy between BMP-2, HAΡΡs and BMSCs resulted in formed osteons, well-developed cancellous bone and minimal residual defects. The established negative correlation between bone density and residual calvarial defects emphasises the relationship between mineralisation and the degree of defect filling. The new data presented demonstrate that the combination of the abovementioned structural, biochemical and cellular factors in 3D bioprinted scaffolds offers a promising strategy for osteoregeneration of complex bone defects.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Periodontal Regeneration and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Veterinary Anatomy, Histology and Embryology, Faculty of Veterinary Medicine, Trakia University, 6000 Stara Zagora, Bulgaria

Department of Medical Biology, Medical University of Plovdiv, 4000 Plovdiv, Bulgaria

Research Institute, Medical University-Plovdiv, 4002 Plovdiv, Bulgaria

Department of Molecular Immunology, Institute of Biology and Immunology of Reproduction, Bulgarian Academy of Sciences, 1000 Sofia, Bulgaria

Department of Veterinary Surgery, Faculty of Veterinary Medicine, Trakia University, 6000 Stara Zagora, Bulgaria

Department of General and Clinical Pathology, Faculty of Veterinary Medicine, Trakia University, 6000 Stara Zagora, Bulgaria

Department of Agricultural Engineering, Faculty of Agriculture, Trakia University, 6000 Stara Zagora, Bulgaria

Department of Biological Sciences, Faculty of Agriculture, Trakia University, 6000 Stara Zagora, Bulgaria

Funding

Development of Research and Innovation at Trakia University in Service of Health and Sustainable Well-Being

References (78)

Show source-provided references
1. Advances in 3D-printed scaffold technologies for bone defect repair: Materials, biomechanics, and clinical prospects10.1186/s12938-025-01381-w ↗
2. Kostadinova, M., Raykovska, M., Simeonov, R., Lolov, S., and Mourdjeva, M. (2025). Recent Advances in Bone Tissue Engineering: Enhancing the Potential of Mesenchymal Stem Cells for Regenerative Therapies. Curr. Issues Mol. Biol., 47.10.3390/cimb47040287 ↗
3. 3D printed hybrid bone constructs of PCL and dental pulp stem cells loaded GelMA10.1002/jbm.a.37235 ↗
4. Polymeric microgels for bone tissue engineering applications—A review10.1080/00914037.2019.1570512 ↗
5. Advanced applications of strontium-containing biomaterials in bone tissue engineering10.1016/j.mtbio.2023.100636 ↗
6. Construction of 3D bioprinting of HAP/collagen scaffold in gelation bath for bone tissue engineering10.1093/rb/rbad067 ↗
7. Clinical challenges in bone tissue engineering—A narrative review10.1016/j.bone.2024.117363 ↗
8. Autologous Bone Graft in Foot and Ankle Surgery10.1016/j.fcl.2016.07.007 ↗
9. Progress in 3D bioprinting technology for tissue/organ regenerative engineering10.1016/j.biomaterials.2019.119536 ↗
10. Autologous bone graft: Is it still the gold standard?10.1016/j.injury.2021.01.043 ↗
11. 3D bioprinting bone/cartilage organoids: Construction, applications, and challenges
12. Three-Dimensional Printed Hydroxyapatite Bone Substitutes Designed by a Novel Periodic Minimal Surface Algorithm Are Highly Osteoconductive10.1089/3dp.2022.0134 ↗
13. Development and application of hydroxyapatite-based scaffolds for bone tissue regeneration: A systematic literature review10.1016/j.bone.2024.117075 ↗
14. Progress in the use of dental pulp stem cells in regenerative medicine10.1016/j.jcyt.2017.12.011 ↗
15. Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration10.1038/s41368-020-0073-y ↗
16. Collagen-based biocomposites inspired by bone hierarchical structures for advanced bone regeneration: Ongoing research and perspectives10.1039/D1BM01294K ↗
17. Collagens-structure, function, and biosynthesis10.1016/j.addr.2003.08.002 ↗
18. Collagen types. Molecular structure and tissue distribution10.1097/00003086-199209000-00033 ↗
19. Collagen-based biomaterials as 3D scaffold for cell cultures: Applications for tissue engineering and gene therapy10.1007/BF02344779 ↗
20. Collagen-based cell migration models in vitro and in vivo10.1016/j.semcdb.2009.08.005 ↗
21. Collagen based polyurethanes—A review of recent advances and perspective10.1016/j.ijbiomac.2015.07.001 ↗
22. Biomimetic 3D-printed PCL scaffold containing a high concentration carbonated-nanohydroxyapatite with immobilized-collagen for bone tissue engineering: Enhanced bioactivity and physicomechanical characteristics10.1088/1748-605X/ac3147 ↗
23. VEGF Scaffolds Enhance Angiogenesis and Bone Regeneration in Irradiated Osseous Defects10.1359/jbmr.060120 ↗
24. Dong, C., and Lv, Y. (2016). Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives. Polymers, 8.10.3390/polym8020042 ↗
25. Improvement of bone formation by bionic hydroxyapatite nanorod via the regulation of macrophage polarization10.1016/j.jmst.2022.07.025 ↗
26. Structural and biological evaluation of novel vanadium/Yttrium co-doped hydroxyapatite for bone tissue engineering applications10.1016/j.jallcom.2023.171697 ↗
27. Preparation and characterization of 3D hydroxyapatite/collagen scaffolds and its application in bone regeneration with bone morphogenetic protein-210.1039/D3RA03034B ↗
28. Schuster, L., Ardjomandi, N., Munz, M., Umrath, F., Klein, C., Rupp, F., Reinert, S., and Alexander, D. (2020). Establishment of Collagen: Hydroxyapatite/BMP-2 Mimetic Peptide Composites. Materials, 13.10.3390/ma13051203 ↗
29. Enhancement of bone formation by genetically-engineered bone marrow stromal cells expressing BMP-2, VEGF and angiopoietin-110.1007/s10529-009-0007-4 ↗
30. Bone marrow stromal cells with a combined expression of BMP-2 and VEGF-165 enhanced bone regeneration10.1088/1748-6041/6/1/015013 ↗
31. The effect of the delivery of vascular endothelial growth factor and bone morphogenic protein-2 to osteoprogenitor cell populations on bone formation10.1016/j.biomaterials.2009.10.059 ↗
32. Recent Advances in Regenerative Tissue Fabrication: Tools, Materials, and Microenvironment in Hierarchical Aspects10.1002/anbr.202000088 ↗
33. Development of porous hydroxyapatite/PVA/gelatin/alginate hybrid flexible scaffolds with improved mechanical properties for bone tissue engineering10.1016/j.matchemphys.2024.129332 ↗
34. Comparative analysis of mesenchymal stromal cells derived from rabbit bone marrow and Wharton’s jelly for adipose tissue engineering10.1080/03008207.2019.1631297 ↗
35. Osteochondral regeneration in rabbit using xenograft decellularized ECM in combination with different biological products; platelet-rich fibrin, amniotic membrane extract, and mesenchymal stromal cells10.1002/jbm.b.35063 ↗
36. The efficiency of genetically modified mesenchymal stromal cells combined with a functionally graded scaffold for bone regeneration in corticosteroid-induced osteonecrosis of the femoral head in rabbits10.1002/jbm.a.37495 ↗
37. A triphasic biomimetic BMSC-loaded scaffold for osteochondral integrated regeneration in rabbits and pigs10.1039/D2BM02148J ↗
38. Comparison of three different types of scaffolds preseeded with human bone marrow mononuclear cells on the bone healing in a femoral critical size defect model of the athymic rat10.1002/term.2484 ↗
39. Fabrication techniques of tissue engineering scaffolds
40. Rico-Llanos, G.A., Borrego-González, S., Moncayo-Donoso, M., Becerra, J., and Visser, R. (2021). Collagen Type I Biomaterials as Scaffolds for Bone Tissue Engineering. Polymers, 13.10.3390/polym13040599 ↗
41. Collagen sponges for bone regeneration with rhBMP-210.1016/j.addr.2003.08.010 ↗
42. Combining autologous bone marrow mononuclear cells seeded on collagen sponge with Nano Hydroxyapatite, and platelet-rich fibrin: Reporting a novel strategy for alveolar cleft bone regeneration10.1016/j.jcms.2018.05.049 ↗
43. Introducing a single-cell-derived human mesenchymal stem cell line expressing hTERT after lentiviral gene transfer10.1111/j.1582-4934.2008.00299.x ↗
44. Hypoxic preconditioning of human mesenchymal stem cells overcomes hypoxia-induced inhibition of osteogenic differentiation10.1089/ten.tea.2009.0021 ↗
45. Variation of BMP2 Concentration and Its Activity in Bone Grafts Obtained from Patients Undergoing Hip Replacement Surgery10.21873/invivo.12312 ↗
46. BMP-2 Enhances Osteogenic Differentiation of Human Adipose-Derived and Dental Pulp Stem Cells in 2D and 3D In Vitro Models
47. Osteogenic responses to different concentrations/ratios of BMP-2 and bFGF in bone formation10.1007/s10439-009-9841-8 ↗
48. Xie, L., Liu, N., Xiao, Y., Liu, Y., Yan, C., Wang, G., and Jing, X. (2020). In Vitro and In Vivo Osteogenesis Induced by Icariin and Bone Morphogenetic Protein-2: A Dynamic Observation. Front Pharmacol., 11.10.3389/fphar.2020.01058 ↗
49. Collagen bioinks redefined: Optimizing ionic strength and growth factor delivery for cartilage tissue engineering10.36922/ijb.4566 ↗
50. Characterization of hydroxyapatite by cytotoxicity test and bending test10.1088/1742-6596/2193/1/012039 ↗
51. The efficacy of bioceramics for the closure of burr-holes in craniotomy: Case studies on 14 patients
52. Shiu, S.T., Lee, W.F., Chen, S.M., Hao, L.T., Hung, Y.T., Lai, P.C., and Feng, S.W. (2021). Effect of Different Bone Grafting Materials and Mesenchymal Stem Cells on Bone Regeneration: A Micro-Computed Tomography and Histomorphometric Study in a Rabbit Calvarial Defect Model. Int. J. Mol. Sci., 22.10.3390/ijms22158101 ↗
53. Lee, Y.C., Chan, Y.H., Hsieh, S.C., Lew, W.Z., and Feng, S.W. (2019). Comparing the Osteogenic Potentials and Bone Regeneration Capacities of Bone Marrow and Dental Pulp Mesenchymal Stem Cells in a Rabbit Calvarial Bone Defect Model. Int. J. Mol. Sci., 20.10.3390/ijms20205015 ↗
54. Ratiu, C.A., Sinescu, C., Dejeu, D., Tica, O., Moisa, C., Croitoru, C.A., Ratiu, I.A., Duma, V.-F., Todor, A., and Miclaus, V. (2025). Participation of the Periosteum, Endosteum, and Hematogenous Marrow in the Early Osseointegration of a Titanium Implant Inserted in Contact with the Hematogenous Marrow. Medicina, 61.10.3390/medicina61101841 ↗
55. Adult Mesenchymal Stem Cells: When, Where, and How
56. The periosteum: What is it, where is it, and what mimics it in its absence?10.1007/s00256-009-0849-9 ↗
57. Induction of bone tissue by transitional epithelium10.1097/00003086-196807000-00003 ↗
58. Skeletal cell fate decisions within periosteum and bone marrow during bone regeneration10.1359/jbmr.081003 ↗
59. Multipotent mesenchymal stromal cells and the innate immune system10.1038/nri3209 ↗
60. Translating stem cell therapies: The role of companion animals in regenerative medicine10.1111/wrr.12044 ↗
61. Commercially available bioinks and state-of-the-art lab-made formulations for bone tissue engineering: A comprehensive review10.1016/j.mtbio.2024.101341 ↗
62. Collagen-based bioinks for hard tissue engineering applications: A comprehensive review10.1007/s10856-019-6234-x ↗
63. Osteogenic differentiation of BMSCs in collagen-based 3D scaffolds10.1039/C8NJ04100H ↗
64. Collagen Matrix Combined With Hydroxyapatite and Nasoseptal Flap for Skull Base Reconstruction10.1002/lio2.70192 ↗
65. Hydroxyapatite: A journey from biomaterials to advanced functional materials10.1016/j.cis.2023.103013 ↗
66. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies10.1002/adma.201902026 ↗
67. Rheological analysis of bio-ink for 3D bio-printing processes10.1016/j.jmapro.2022.02.048 ↗
68. Yang, Z., Yi, P., Liu, Z., Zhang, W., Mei, L., Feng, C., Tu, C., and Li, Z. (2022). Stem Cell-Laden Hydrogel-Based 3D Bioprinting for Bone and Cartilage Tissue Engineering. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.865770 ↗
69. Improved bone regeneration with bone targeted scaffold10.1038/s41598-025-12497-3 ↗
70. Li, L., Yang, L., Yang, Y., Zhu, J., Shi, R., Deng, Q., Wang, J., and Sun, F. (2025). 3D printed scaffolds loaded with BMP-2 for bone defect regeneration: A systematic review and meta-analysis. Front. Physiol., 16.10.3389/fphys.2025.1641937 ↗
71. In-situ stable injectable collagen-based hydrogels for cell and growth factor delivery10.1016/j.mtla.2020.100954 ↗
72. Highly porous multiple-cell-laden collagen/hydroxyapatite scaffolds for bone tissue engineering10.1016/j.ijbiomac.2022.09.249 ↗
73. Wang, X., Li, Z., Wang, Z., Liu, H., Cui, Y., Liu, Y., Ren, M., Zhan, H., Li, Z., and Wu, M. (2021). Incorporation of Bone Morphogenetic Protein-2 and Osteoprotegerin in 3D-Printed Ti6Al4V Scaffolds Enhances Osseointegration Under Osteoporotic Conditions. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.754205 ↗
74. Swine models, genomic tools and services to enhance our understanding of human health and diseases10.1038/laban.1215 ↗
75. Alkaron, W., Almansoori, A., Balázsi, K., and Balázsi, C. (2024). Hydroxyapatite-Based Natural Biopolymer Composite for Tissue Regeneration. Materials, 17.10.3390/ma17164117 ↗
76. Bone marrow-derived mesenchymal stem cells (BM-MSCs) inhibit apoptosis of spinal cord cells in a kaolin-induced syringomyelia-associated scoliosis rabbit model
77. Isolation, culture and induced differentiation of rabbit mesenchymal stem cells into osteoblasts
78. Concurrently bioprinted scaffolds with autologous bone and allogeneic BMSCs promote bone regeneration through native BMSC recruitment10.1631/bdm.2400011 ↗