journal article·2025-12-26Open access

Biomechanical Effects of Platform Diameter and Screw Length in an Abutment-Free Tissue-Level Implant System Compared with a Ti-Base Configuration: 3D Finite Element Analysis

Aliona Dodi, Alecsandru Ionescu, Mihaela Anca Marin, Emil Nuțu, Vlad Gabriel Vasilescu, Ana Maria Cristina Țâncu, Toma Lucian Ciocan, Marina Imre

Abstract

This finite element analysis compared a tissue-level implant with an engaging Ti-base to abutment-free, direct-to-implant, tissue-level configurations (3.7 mm and 4.5 mm platforms; short and long retention screws) to examine how platform width and screw length influence stresses under axial and oblique loads. Five configurations were modeled with identical materials and boundary conditions. Screw preload corresponding to a tightening torque of 35 N·cm was applied in the first step, followed by either a 400 N axial load or a 300 N at 30°. Oblique loading dominated the mechanical response, increasing stresses relative to axial loading and concentrating them at the implant neck and first thread, as well as at the crown screw-access and antirotation regions. Under oblique loads, the 3.7 mm platform implant showed the highest stresses, whereas the 4.5 mm platform implant was comparable to or slightly less stressed than the Ti-base configuration, whose peaks remained confined to a small internal recess. Crown stresses remained localized around the antirotation features, while the composite layer bore negligible load. Within the limitations of this numerical model, abutment-free, direct-to-implant workflows may achieve biomechanical performance comparable to Ti-base solutions if platform and screw selection are aligned with the occlusal scheme, but ISO-style fatigue testing and experimental or clinical validation are required.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty · Ocular Disorders and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Discipline of Prosthodontics, Faculty of Dentistry, Carol Davila University of Medicine and Pharmacy, 37 Dionisie Lupu Street, District 2, 020021 Bucharest, Romania

Pedodontics Department, Faculty of Dentistry, Carol Davila University of Medicine and Pharmacy, 37 Dionisie Lupu Street, District 2, 0200221 Bucharest, Romania

Department of Strength of Materials, Faculty of Industrial Engineering and Robotics, National University of Science and Technology “Politehnica” Bucharest, 313 Splaiul Independentei, CD building, District 6, 060042 Bucharest, Romania

Romanian Research and Development Institute for Gas Turbines COMOTI, 220D Iuliu Maniu Blvd., District 6, 061126 Bucharest, Romania

Discipline of Dental Prosthesis Technology, Faculty of Dentistry, Carol Davila University of Medicine and Pharmacy, Dionisie Lupu Street, No. 37, District 2, 020021 Bucharest, Romania

References (89)

Show source-provided references
1. Mugri, M.H., Reddy, N.K., Sayed, M.E., Mattoo, K., Qomari, O.M., Alnaji, M.M., Mshari, W.A., Alqarawi, F.K., AlResayes, S.S., and Alshaibani, R.M. (2025). Stress Assessment of Abutment-Free and Three Implant–Abutment Connections Utilizing Various Abutment Materials: A 3D Finite Element Study of Static and Cyclic Static Loading Conditions. J. Funct. Biomater., 16.10.3390/jfb16100372 ↗
2. Biomechanical Stress and Microgap Analysis of Bone-Level and Tissue-Level Implant Abutment Structure According to the Five Different Directions of Occlusal Loads10.4047/jap.2020.12.5.316 ↗
3. Microleakage along the Implant–Abutment Interface: A Systematic Review and Meta-Analysis of in Vitro Studies10.1186/s40729-023-00494-y ↗
4. Screw Retained vs. Cement Retained Implant-Supported Fixed Dental Prosthesis10.1111/prd.12168 ↗
5. Effects of Implant Diameter, Implant-Abutment Connection Type, and Bone Density on the Biomechanical Stability of Implant Components and Bone: A Finite Element Analysis Study10.1016/j.prosdent.2020.08.042 ↗
6. Systematic Assessment of Soft Tissue Level and Bone Level Dental Implants10.1016/j.ajoms.2023.02.007 ↗
7. Three-Dimensional Finite Element Analysis of Extra Short Implants Focusing on Implant Designs and Materials10.1186/s40729-019-0202-6 ↗
8. A Comparative Analysis on Two Types of Oral Implants, Bone-Level and Tissue-Level, with Different Cantilever Lengths of Fixed Prosthesis10.1111/jopr.12388 ↗
9. Lee, J.-H., Jang, H.Y., and Lee, S.Y. (2021). Finite Element Analysis of Dental Implants with Zirconia Crown Restorations: Conventional Cement-Retained vs. Cementless Screw-Retained. Materials, 14.10.3390/ma14102666 ↗
10. The Evaluation of Stress on Bone Level and Tissue Level Short Implants: A Finite Element Analysis (FEA) Study10.1016/j.jormas.2022.09.019 ↗
11. Evaluation of Stress Distribution in and around Dental Implants Using Three Different Implant-Abutment Interfaces with Platform-Switched and Non-Platform-Switched Abutments: A Three-Dimensional Finite Element Analysis10.34172/joddd.2023.40723 ↗
12. Finite Element Analysis of Platform Switching Effects on Stress Distribution in Posterior Implants Placed in Different Bone Types Under Axial and Oblique Loading Conditions
13. Evaluation of Platform Switching on Crestal Bone Stress in Tapered and Cylindrical Implants: A Finite Element Analysis
14. Afazal, M., Gupta, S., Tevatia, A., Afreen, S., and Chanda, A. (2023). Computational Investigation of Dental Implant Restoration Using Platform-Switched and -Matched Configurations. Computation, 11.10.3390/computation11040079 ↗
15. Effect of Platform Switching on Peri-Implant Bone: A 3D Finite Element Analysis10.1016/j.prosdent.2018.08.011 ↗
16. Al-Sanea, A., Aktas, S., Celik, T., and Kisioglu, Y. (2023). Effects of the Internal Contact Surfaces of Dental Implants on Screw Loosening: A 3-Dimensional Finite Element Analysis. J. Prosthet. Dent., 130.10.1016/j.prosdent.2023.07.007 ↗
17. Screw Preload Loss under Occlusal Load as a Predictor of Loosening Risk in Varying Dental Implant Designs10.1016/j.jmbbm.2023.106165 ↗
18. Preload and Friction in an Implant–Abutment–Screw Complex Including a Carbon-Coated Titanium Alloy Abutment Screw: An in Vitro Study10.1186/s40729-023-00473-3 ↗
19. Fretting-Corrosion at the Implant-Abutment Interface Simulating Clinically Relevant Conditions10.1016/j.dental.2024.08.007 ↗
20. Comparison of Three Implant Systems under Preload Loss: A Finite Element Analysis Validated by Digital Image Correlation Methods10.2186/jpr.JPR_D_24_00064 ↗
21. Mechanical Behavior of Titanium and Zirconia Abutments at the Implant-Abutment Interface: A Systematic Review10.1016/j.prosdent.2022.01.006 ↗
22. Deste Gökay, G., Oyar, P., Gökçimen, G., and Durkan, R. (2024). Static and Dynamic Stress Analysis of Different Crown Materials on a Titanium Base Abutment in an Implant-Supported Single Crown: A 3D Finite Element Analysis. BMC Oral Health, 24.10.1186/s12903-024-04328-0 ↗
23. Poovarodom, P., Rungsiyakull, C., Suriyawanakul, J., Li, Q., Sasaki, K., Yoda, N., and Rungsiyakull, P. (2023). Effect of Gingival Height of a Titanium Base on the Biomechanical Behavior of 2-Piece Custom Implant Abutments: A 3-Dimensional Nonlinear Finite Element Study. J. Prosthet. Dent., 130.10.1016/j.prosdent.2023.06.031 ↗
24. Finite Element Analysis in Implant Dentistry: State of the Art and Future Directions10.1016/j.dental.2023.04.002 ↗
25. Effects of Dental Implant Diameter and Tapered Body Design on Stress Distribution in Rigid Polyurethane Foam during Insertion10.1016/j.medengphy.2024.104181 ↗
26. Tribst, J.P.M., Özkara, N., Blom, E.J., Kleverlaan, C.J., Ausiello, P., Bruhnke, M., Feilzer, A.J., and Dal Piva, A.M.d.O. (2025). The Effect of Implant–Abutment Contact Area on the Stress Generation of Bone-Level and Tissue-Level Implants. Appl. Sci., 15.10.3390/app15052744 ↗
27. Effect of Different Customized Abutment Types on Stress Distribution in Implant-Supported Single Crown: A 3D Finite Element Analysis10.1111/jopr.13530 ↗
28. (2025, October 29). TRI® Dental Implants Int. AG. MATRIX Line. Hünenberg, Switzerland. Available online: https://tri-implants.swiss/en/matrix-line/.
29. A New Implant System with Directly Screwed Supraconstructions: Impact of Restoration Material and Artificial Aging on the Bending Moment10.11607/ijp.8102 ↗
30. Mechanical Stability of Fully Personalized, Abutment-Free Zirconia Implant Crowns on a Novel Implant-Crown Interface10.1016/j.jdent.2022.104121 ↗
31. Mechanical Characterisation and Biomechanical and Biological Behaviours of Ti-Zr Binary-Alloy Dental Implants
32. On the Mechanical Integrity of Retrieved Dental Implants10.1016/j.jmbbm.2015.05.014 ↗
33. Current Complications and Issues of Implant Superstructure10.2334/josnusd.21-0534 ↗
34. A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia10.3390/ma8030932 ↗
35. Effect of Different Restorative Crown and Customized Abutment Materials on Stress Distribution in Single Implants and Peripheral Bone: A Three-Dimensional Finite Element Analysis Study10.1016/j.prosdent.2017.03.008 ↗
36. Mechanical Integrity of All-on-Four Dental Implant Systems: Finite Element Simulation of Material Properties of Zirconia, Titanium, and PEEK10.2174/0118742106325708240614044708 ↗
37. Finite Element Analysis of Zirconia Dental Implant10.3390/prosthesis4030040 ↗
38. Stress Evaluation of Implant-Abutment Connections under Different Loading Conditions: A 3D Finite Element Study10.1563/AAID-JOI-D-11-00205 ↗
39. Application of Finite Element Model in Implant Dentistry: A Systematic Review10.4103/JPBS.JPBS_296_18 ↗
40. Finite Element Analysis of Dental Implants with and without Microthreads under Static and Dynamic Loading10.1615/JLongTermEffMedImplants.2017020007 ↗
41. (2016). Dentistry—Implants—Dynamic Loading Test for Endosseous Dental Implants. Standard No. ISO 14801:2016. Available online: https://www.iso.org/standard/61997.html.
42. (2025, October 29). TRI Dental Implants Int. AG Product Catalog 2025, Hünenberg, Switzerland. Available online: https://tri-implants.swiss/download/170926_en_product_catalogue_new_web.pdf.
43. (2025, December 13). TRI Dental Implants Int. AG Matrix Line Product Catalog 2025, Hünenberg, Switzerland. Available online: https://tri-implants.swiss/download/2025-09-tri_-matrix-catalog-eu-01_web_1.pdf.
44. (2022). Quantities and Units—Part 1: General. Standard No. ISO 80000-1:2022. Available online: https://www.iso.org/standard/76921.html.
45. Interaction of Bone-Dental Implant with New Ultra Low Modulus Alloy Using a Numerical Approach10.1016/j.msec.2014.01.048 ↗
46. (2015). Implants for Surgery—Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP). Standard No. ISO 13356:2015. Available online: https://www.iso.org/standard/62373.html.
47. (2025, October 22). ASM Material Data Sheet. Available online: https://asm.matweb.com/search/specificmaterial.asp?bassnum=mtp641.
48. (2025, October 23). Morgan Advanced Ceramics CIM Zirconia Technical Ceramic. Available online: https://www.matweb.com/search/datasheet.aspx?matguid=e90b81329aa547aa95433fc5dcb3940c&n=1&ckck=1.
49. Measurement of Poisson’s Ratio of Dental Composite Restorative Materials10.1016/j.biomaterials.2003.09.029 ↗
50. Young’s Modulus of Trabecular and Cortical Bone Material: Ultrasonic and Microtensile Measurements10.1016/0021-9290(93)90042-D ↗
51. Mathematical Relationships between Bone Density and Mechanical Properties: A Literature Review10.1016/j.clinbiomech.2007.08.024 ↗
52. Young’s Modulus of Trabecular Bone at the Tissue Level: A Review10.1016/j.actbio.2018.08.001 ↗
53. Prados-Privado, M., Martínez-Martínez, C., Gehrke, S.A., and Prados-Frutos, J.C. (2020). Influence of Bone Definition and Finite Element Parameters in Bone and Dental Implants Stress: A Literature Review. Biology, 9.10.3390/biology9080224 ↗
54. Influence of Bone and Dental Implant Parameters on Stress Distribution in the Mandible: A Finite Element Study
55. Biomechanics of the Press-Fit Phenomenon in Dental Implantology: An Image-Based Finite Element Analysis10.1186/1746-160X-8-18 ↗
56. Shayanfard, P., Tan, X., Karl, M., and Wendler, F. (2024). Finite Element Combined Design and Material Optimization Addressing the Wear in Removable Implant Prosthodontics. J. Funct. Biomater., 15.10.3390/jfb15110344 ↗
57. Efficiency Considerations for the Purely Tapered Interference Fit (TIF) Abutments Used in Dental Implants10.1115/1.1784473 ↗
58. Dynamic Nature of Abutment Screw Retightening: Finite Element Study of the Effect of Retightening on the Settling Effect10.1016/j.prosdent.2014.09.017 ↗
59. (2005). Fasteners—Torqueclamp Force Testing. Standard No. ISO 16047-2005. Available online: https://www.studocu.com/row/document/sakarya-universitesi/mechatronic-engineering/iso-16047-2005-fasteners-torqueclamp-force-testing/6704899.
60. Alemanno, F., Peretti, V., Tortora, A., and Spriano, S. (2020). Tribological Behaviour of Ti or Ti Alloy vs. Zirconia in Presence of Artificial Saliva. Coatings, 10.10.3390/coatings10090851 ↗
61. (2025, October 22). Torque Technical Data. Available online: https://www.tohnichi.com/torque-technical-data/.
62. Effect of Bite Force in Occlusal Adjustment of Dental Implants on the Distribution of Occlusal Pressure: Comparison among Three Bite Forces in Occlusal Adjustment10.1186/s40729-015-0014-2 ↗
63. Comparison of the Effects of Different Loading Locations on Stresses Transferred to Straight and Angled Implant-Supported Zirconia Frameworks: A Finite Element Method Study10.1080/13102818.2015.1028445 ↗
64. Bone’s Mechanostat: A 2003 Update10.1002/ar.a.10119 ↗
65. Wang, P.-S., Tsai, M.-H., Wu, Y.-L., Chen, H.-S., Lei, Y.-N., and Wu, A.Y.-J. (2023). Biomechanical Analysis of Titanium Dental Implants in the All-on-4 Treatment with Different Implant-Abutment Connections: A Three-Dimensional Finite Element Study. J. Funct. Biomater., 14.10.3390/jfb14100515 ↗
66. Stress Distribution by Parafunctional Loading on Tooth–Implant, Implant–Implant, and Tooth–Tooth-Supported Prosthesis: A Comparative Three-Dimensional Finite Element Analysis10.4103/jips.jips_30_24 ↗
67. Stress Analysis and Factor of Safety in Three Dental Implant Systems by Finite Element Analysis10.1016/j.sdentj.2022.08.006 ↗
68. Finite Element Analysis of the Influence of Implant Tilting and the Direction of Loading on the Displacement and Micromotion of Immediately Loaded Implants10.4103/jpbs.jpbs_1103_23 ↗
69. Influence of Intermediate Abutment Height and Timing of Placement on Marginal Bone Loss in Single Implant-Supported Crowns: A 12-Month Follow-up Randomized Clinical Trial10.1007/s00784-025-06364-8 ↗
70. Effect of One-Time Placement of the Definitive Abutment versus Multiple Healing Abutment Disconnections and Reconnections during the Prosthetic Phase on Radiographic and Clinical Outcomes: A 12-Month Randomized Clinical Trial10.1111/cid.13361 ↗
71. D’Ercole, S., Dotta, T.C., Farani, M.R., Etemadi, N., Iezzi, G., Comuzzi, L., Piattelli, A., and Petrini, M. (2022). Bacterial Microleakage at the Implant-Abutment Interface: An In Vitro Study. Bioengineering, 9.10.3390/bioengineering9070277 ↗
72. Systematic Review of Peri-Implant Conditions and Aesthetic Outcomes of Customized versus Conventional Healing Abutments10.1186/s40729-024-00581-8 ↗
73. Abutment Height Influences the Effect of Platform Switching on Peri-Implant Marginal Bone Loss10.1111/clr.12554 ↗
74. One Abutment One Time vs. Repeatable Abutment Disconnections in Implants, Restored with Cemented/Screw Retained Fixed Partial Dentures: Marginal Bone Level Changes. A Systematic Review and Meta-Analysis
75. The Effect of One-Time Abutment Placement on Clinical and Radiographic Outcomes: A 5-Year Randomized Clinical Trial10.1111/clr.14256 ↗
76. Excess Cement and Peri-Implant Disease: A Cross-Sectional Clinical Endoscopic Study10.1002/JPER.24-0510 ↗
77. Clinical and Laboratory Outcomes of Angled Screw Channel Implant Prostheses: A Systematic Review10.1055/s-0041-1740298 ↗
78. The One Abutment-One Time Protocol: A Systematic Review and Meta-Analysis10.1902/jop.2017.170238 ↗
79. Clinical, Radiographic, and Immunological Evaluation of Angulated Screw-Retained and Cemented Single-Implant Crowns in the Esthetic Region: A 1-Year Randomized Controlled Clinical Trial10.1111/cid.13035 ↗
80. Fundamentals of Occlusion and Restorative Dentistry. Part II: Occlusal Contacts, Interferences and Occlusal Considerations in Implant Patients
81. (2024). Dentistry—Ceramic Materials. Standard No. ISO 6872:2024. Available online: https://www.iso.org/standard/81718.html.
82. Incidence of Peri-Implant Disease Associated with Cement- and Screw-Retained Implant-Supported Prostheses: A Systematic Review and Meta-Analysis10.1016/j.prosdent.2023.08.030 ↗
83. Barrett, T. (1990). Fastener Design Manual, Lewis Research Center.
84. Five-year Randomized Controlled Clinical Study Comparing Cemented and Screw-retained Zirconia-based Implant-supported Single Crowns10.1111/clr.13913 ↗
85. Ionescu, A., Marin, M., Bayrich, N., Fennema, P., Nicolescu, M.I., Jung, R.E., and Dodi, A. (2025). Abutment-Free Tissue-Level Implants for Personalized Monolithic Zirconia Implant Crowns: A Retrospective Cohort Study. Int. J. Oral Maxillofac. Implant.10.11607/jomi.11144 ↗
86. In Vitro Color Changes of Soft Tissues Caused by Restorative Materials
87. Influence of Abutment Color and Mucosal Thickness on Soft Tissue Color10.11607/jomi.4794 ↗
88. Esthetic, Mechanical, and Biological Outcomes of Various Implant Abutments for Single-Tooth Replacement in the Anterior Region: A Systematic Review of the Literature10.1186/s40729-021-00370-7 ↗
89. Optical Efficacy of Titanium Nitride-Coated Abutment Material on Soft Tissue Discoloration: A Spectrophotometric In Vitro Analysis10.11607/jomi.8537 ↗