journal article·2025-12-26Open access

Silicon Nitride Bioceramics with TiC Additives: Excellent Mechanical Properties, Cytocompatibility, and Antibacterial Properties

Zhebin Lou, Jiayu He, Yuandong Liu, Hanxu Zhu, Xiaofeng Zeng, Zulaikha Abid

Abstract

Silicon nitride is a type of bioceramic with great application potential. However, the brittleness of silicon nitride can be addressed through toughening. In this study, various proportions of TiC were incorporated into the sintering additive system to explore the effects of different amounts of TiC on the mechanical properties, cell compatibility, and antibacterial properties of silicon nitride. Silicon nitride was prepared by gas pressure sintering, with TiC addition amounts of 3%, 5%, 8%, and 13% wt. Among the four types of silicon nitride, the mechanical properties of silicon nitride with 3% and 5% wt TiC addition were improved, with the flexural strength and fracture toughness of the former being 571 MPa and 8.35 MPa·m1/2, respectively, and the flexural strength and fracture toughness of the latter being 532 MPa and 8.53 MPa·m1/2, respectively. The surface of all four types of silicon nitride was enriched with Ti as the amount of TiC added increased, and the surface properties of the four silicon nitrides were the same. All four types of silicon nitride could continuously release Si ions in liquid. In vitro cell experiments showed that all four types of silicon nitride could enable normal cell proliferation and adhesion. Silicon nitride with different TiC addition amounts all exhibited good cell compatibility. Compared with the control material, each of the four types of silicon nitride demonstrated robust antibacterial efficacy against Staphylococcus aureus and Escherichia coli, with comparable potency across all types. These findings indicate that the incorporation of titanium carbide (TiC) within the silicon nitride matrix, particularly within the 3–5% weight ratio range, not only enhances mechanical integrity and cellular compatibility, but also confers notable antibacterial attributes. Consequently, these results demonstrate the promising viability of TiC-modified silicon nitride as a prospective material for the fabrication of bone implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Bone Tissue Engineering Materials · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China

Key Laboratory of Biohydrometallurgy of Ministry of Education, Changsha 410083, China

Hengyang Kaixin Special Material Technology Co., Ltd., Hengyang 421200, China

Funding

the Ministry of Industry and Information Technology of the People’s Republic of China · Changsha Municipal Natural Science Foundation · science and technology innovation Program of Hunan Province · Manufacturing Talent Support Program—Advanced Foundational Crafts Talent Project

References (82)

Show source-provided references
1. Biocompatibility and drug delivery systems10.1039/C0SC00203H ↗
2. Bioceramics: From Clinic to Concept
3. Evaluation of the osteoconductivity of α-tricalcium phosphate, β-tricalcium phosphate, and hydroxyapatite combined with or without simvastatin in rat calvarial defect10.1002/jbm.a.33117 ↗
4. Review of bioactive glass: From Hench to hybrids10.1016/j.actbio.2012.08.023 ↗
5. Functionalized ceramics for biomedical, biotechnological and environmental applications10.1016/j.actbio.2013.03.036 ↗
6. Physico-chemistry and cytotoxicity of ceramics: Part II Cytotoxicity of ceramics10.1007/BF00121148 ↗
7. Increased cell response to zirconia ceramics by surface modification10.1063/1.2385208 ↗
8. Ceramics for medical applications: A picture for the next 20 years10.1016/j.jeurceramsoc.2008.08.025 ↗
9. On the possibility of silicon nitride as a ceramic for structural orthopaedic implants. Part I: Processing, microstructure, mechanical properties, cytotoxicity10.1007/s10856-008-3417-2 ↗
10. Surface strength of silicon nitride in relation to rolling contact performance measured on ball-on-rod and modified four-ball tests10.1016/j.triboint.2009.07.005 ↗
11. Surface quality of tribochemically polished silicon nitride10.1149/1.1391795 ↗
12. Comparative investigation of the biocompatibility of various silicon nitride ceramic qualities in vitro10.1023/B:JMSM.0000046396.14073.92 ↗
13. Cytocompatibility of high strength non-oxide ceramics10.1002/jbm.a.32527 ↗
14. Cytotoxic evaluation of silicon nitride-based ceramics10.1016/j.msec.2004.08.007 ↗
15. Biodegradable Si3N4 bioceramic sintered with Sr, Mg and Si for spinal fusion: Surface characterization and biological evaluation10.1016/j.apmt.2018.06.002 ↗
16. Bioceramics are not bioinert10.1016/j.mattod.2017.06.008 ↗
17. Silicon Nitride: A Bioceramic with a Gift10.1021/acsami.9b07997 ↗
18. The role of nitrogen off-stoichiometry in the osteogenic behavior of silicon nitride bioceramics10.1016/j.msec.2019.110053 ↗
19. Comparison of surface properties, cell behaviors, bone regeneration and osseointegration between nano tantalum/PEEK composite and nano silicon nitride/PEEK composite10.1080/09205063.2021.1974812 ↗
20. Biological Impact of Silicon Nitride for Orthopaedic Applications: Role of Particle Size, Surface Composition and Donor Variation10.1038/s41598-018-27494-y ↗
21. Surface topography of silicon nitride affects antimicrobial and osseointegrative properties of tibial implants in a murine model10.1002/jbm.a.36189 ↗
22. The effect of silicon nitride ceramic on rabbit skeletal cells and tissue. An in vitro and in vivo investigation10.1097/00003086-198907000-00032 ↗
23. Tissue response around silicon nitride implants in rabbits10.1002/jbm.a.31363 ↗
24. Promoting osteoblasts responses in vitro and improving osteointegration in vivo through bioactive coating of nanosilicon nitride on polyetheretherketone
25. Anterior Lumbar Interbody Fusion Using Reaction Bonded Silicon Nitride Implants: Long-Term Case Series of the First Synthetic Anterior Lumbar Interbody Fusion Spacer Implanted in Humans10.1016/j.wneu.2018.08.237 ↗
26. Bacteriostatic behavior of surface modulated silicon nitride in comparison to polyetheretherketone and titanium10.1002/jbm.a.35987 ↗
27. Silicon Nitride Bioceramics Induce Chemically Driven Lysis in Porphyromonas gingivalis10.1021/acs.langmuir.6b00393 ↗
28. Anti-infective and osteointegration properties of silicon nitride, poly(ether ether ketone), and titanium implants10.1016/j.actbio.2012.07.038 ↗
29. Decreased bacteria activity on Si3N4 surfaces compared with PEEK or titanium
30. Decreased Bacterial Count and Biofilm Formation Associated with Silicon Nitride (Si3N4) Materials Used in Interbody Fusion Cages (IBF) Compared to Titanium and Polyetheretherketone (PEEK)10.1016/j.spinee.2012.08.356 ↗
31. Silicon nitride as a potential candidate for dental implants: Osteogenic activities and antibacterial properties10.1557/s43578-021-00249-8 ↗
32. Treatment of lumbar discitis using silicon nitride spinal spacers: A case series and literature review10.1016/j.ijscr.2018.02.009 ↗
33. Radiographic Follow-up of Transforaminal Lumbar Fusion with Silicon Nitride Spacers: A case Report of Two Patients
34. Effect of TiC particle size on high temperature oxidation behavior of TiC reinforced stainless steel10.1016/j.apsusc.2019.02.138 ↗
35. The stability of TiC surfaces in the environment with various carbon chemical potential and surface defects10.1016/j.apsusc.2016.06.022 ↗
36. High temperature wear of cermet particle reinforced NiCrBSi hardfacings10.1016/j.triboint.2012.08.013 ↗
37. Densification, microstructure, and fracture behavior of TiC/Si3N4 composites by spark plasma sintering10.1016/S1001-0521(08)60136-9 ↗
38. Microstructure and mechanical properties of Si3N4-TiC nanocomposites10.1179/174328407X157335 ↗
39. Bioinert TiC ceramic coating prepared by laser cladding: Microstructures, wear resistance, and cytocompatibility of the coating10.1016/j.surfcoat.2021.127635 ↗
40. Effects of heat treatment on microstructure and mechanical properties of TiC/TiB composite bioinert ceramic coatings in-situ synthesized by laser cladding on Ti6Al4V10.1016/j.ceramint.2020.08.186 ↗
41. Osseointegration is improved by coating titanium implants with a nanostructured thin film with titanium carbide and titanium oxides clustered around graphitic carbon10.1016/j.msec.2016.08.076 ↗
42. Effect of titanium carbide coating on the osseointegration response in vitro and in vivo10.1016/j.biomaterials.2006.08.018 ↗
43. In vitro and in vivo performance of bioactive Ti6Al4V/TiC/HA implants fabricated by a rapid microwave sintering technique10.1016/j.msec.2014.06.015 ↗
44. TiCw/TiC ceramics composites: SPS preparation, thermal and mechanical properties10.1016/j.mseb.2025.118005 ↗
45. (Ti, Ta)C-(Ti, Ta)B2-SiC based ceramics with core-rim structure by in-situ reaction sintering at low temperature: Formation mechanism and enhanced mechanical properties10.1016/j.jmst.2025.04.061 ↗
46. Self-monitoring of fracture and strain in titanium carbide reinforced silicon nitride ceramics10.1023/A:1004772226385 ↗
47. Friction and wear characteristics of silicon nitride ceramics under dry friction condition10.1088/2053-1591/abe8ab ↗
48. Wang, P., and Zhang, X. (2025). Experimental Study of the Service Performance of Full Ceramic Silicon Nitride Ball Bearings. Lubricants, 13.10.3390/lubricants13100461 ↗
49. Effect of load on the friction and wear behaviour of silicon nitride and silicon nitride titanium carbide ceramic composite10.1016/j.matpr.2019.07.638 ↗
50. Tressler, R.E., Messing, G.L., Pantano, C.G., and Newnham, R.E. (1986). Mechanical Properties and Wear Resistance of Silicon Nitride-Titanium Carbide Composites. Tailoring Multiphase and Composite Ceramics, Springer.10.1007/978-1-4613-2233-7 ↗
51. Tribological properties of TiC particles reinforced Ni-based alloy composite coatings10.1016/S1003-6326(13)62648-5 ↗
52. Tribological behavior of AA7075-TiC composites by powder metallurgy10.1108/ILT-10-2017-0312 ↗
53. (2005). Biological Evaluation of Medical Devices. Part 12: Sample Preparation and Reference Material (Standard No. GB/T 16886.12-2005).
54. (2000). Biological Evaluation of Medical Devices. Part 8: Selection and Qualification of Reference Materials for Biological Tests (Standard No. ISO 10993-8:2000).
55. (2024). Test Method for Strength of Ceramic Materials (Standard No. GB/T 4740-2024).
56. (2006). Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics)—Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature (Standard No. GB/T 6569-2006).
57. (2009). Fine Ceramics (Advanced Ceramics Advanced Technical Ceramics)—Test Method for Fracture Toughness of Monolithic Ceramics at Room Temperature by Single Edge Precracked Beam (SEPB) Method (Standard No. GB/T 23806-2009).
58. Orthopedic applications of silicon nitride ceramics10.1016/j.actbio.2012.04.031 ↗
59. Luo, H., Li, C., Deng, L.W., Li, Y., Xiao, P., and Zhang, H.B. (2020). C0.3N0.7Ti-SiC Toughed Silicon Nitride Hybrids with Non-Oxide Additives Ti3SiC2. Materials, 13.10.3390/ma13061428 ↗
60. Temperature-driven wear behavior of Si3N4-based ceramic reinforced by in situ formed TiC0.3N0.7 particles10.1111/jace.16283 ↗
61. General review of titanium toxicity10.1186/s40729-019-0162-x ↗
62. Surface damage of dental implant systems and ions release after exposure to fluoride and hydrogen peroxide10.1111/jre.12603 ↗
63. The Truth of Toxicity Caused by Yttrium Oxide Nanoparticles to Yeast Cells10.1166/jnn.2019.16544 ↗
64. Phytotoxicity of Y2O3 nanoparticles and Y3+ ions on rice seedlings under hydroponic culture10.1016/j.chemosphere.2020.127943 ↗
65. Size-dependent cytotoxicity of yttrium oxide nanoparticles on primary osteoblasts in vitro10.1007/s11051-016-3447-5 ↗
66. Review: Liquid phase sintering10.1007/s10853-008-3008-0 ↗
67. Cold sintering of ceramics and glasses: A review10.1016/j.cossms.2020.100807 ↗
68. Porosity and microstructure control of porous ceramics by partial hot pressing10.1557/JMR.2001.0262 ↗
69. He, J.Y., Liu, Y.D., Zeng, X.F., Tong, Y., Liu, R., Wang, K., Shangguan, X.D., Qiu, G.Z., and Sipaut, C.S. (2023). Silicon Nitride Bioceramics Sintered by Microwave Exhibit Excellent Mechanical Properties, Cytocompatibility In Vitro, and Anti-Bacterial Properties. J. Funct. Biomater., 14.10.3390/jfb14110552 ↗
70. Mechanical properties and biological activity of 3D printed silicon nitride materials10.1016/j.ceramint.2024.02.041 ↗
71. Effects of Silicon on Osteoblast Activity and Bone Mineralization of MC3T3-E1 Cells10.1007/s12011-012-9593-4 ↗
72. Mechanical properties of titanium cermets for joint prostheses10.2320/matertrans.47.418 ↗
73. Structural and biocompatible characterization of TiC/a:C nanocomposite thin films10.1016/j.msec.2012.12.076 ↗
74. Attachment and proliferation of human osteoblast-like cells (MG-63) on laser-ablated titanium implant material10.1016/j.msec.2013.06.020 ↗
75. Evaluation of cell binding to collagen and gelatin: A study of the effect of 2D and 3D architecture and surface chemistry10.1007/s10856-016-5763-9 ↗
76. Modification of the surfaces of medical devices to prevent microbial adhesion and biofilm formation10.1016/j.jhin.2013.06.015 ↗
77. A review and a fundamental theory of silicon nitride tribochemistry10.1016/j.wear.2012.03.001 ↗
78. Surface modulation of silicon nitride ceramics for orthopaedic applications10.1016/j.actbio.2015.08.014 ↗
79. In vitro antibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: II. Fourier transform infrared spectroscopy10.1039/C8AN00234G ↗
80. In situ molecular vibration insights into the antibacterial behavior of silicon nitride bioceramic versus gram-negative Escherichia coli10.1016/j.saa.2019.117299 ↗
81. In vitro antibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: I. In situ time-lapse Raman spectroscopy10.1039/C8AN00233A ↗
82. Monitoring metabolic reactions in Staphylococcus epidermidis exposed to silicon nitride using in situ time-lapse Raman spectroscopy10.1117/1.JBO.23.5.056002 ↗