journal article·2025-12-21Open access

Modification of Physico-Chemical and Biological Characteristics of Polymethylmethacrylate with Amorphous Carbon Nanoparticles for Counteracting Healthcare-Associated Infections

Sergey V. Gudkov, Dmitriy A. Serov, Ruslan M. Sarimov, Vasiliy S. Novikov, Maksim Moskovskiy, Maksim B. Rebezov, Mikhail V. Dubinin, Konstantin V. Sergienko, Mikhail A. Sevostyanov, Fatikh M. Yanbaev, Maxim E. Astashev, Maria V. Vedunova

Abstract

Composite materials based on polymethylmethacrylate (PMMA) and carbon nanoparticles are used in aviation, construction, medical and other fields of activity. Carbon nanotubes and carbon nano-dots are mainly used as carbon nanoparticles. Both carbon nanotube and carbon nano-dots are difficult to obtain materials with considerable cost. Amorphous carbon nanoparticles, on the contrary, are easy to obtain and have a low cost. The purpose of this work is to study the physico-chemical and biological characteristics of polymethylmethacrylate modified with amorphous carbon nanoparticles. Laser ablation was used to obtain the nanoparticles. Dynamic light scattering, measurement of the electrokinetic potential, TEM, AFM, and Raman microscopy are used to characterize nanoparticles. FTIR, MIM, AFM, UV-visual diagnostics, ROS tests, and biopolymer regeneration tests were used to analyze the combined sensors. The bacteriostatic effect was evaluated using turbodimetry, and the antibacterial effect was evaluated using precision cytofluorometry. Mammalian cells were examined using fluorescence microscopy. Carbon nanoparticles (CNPs) have been obtained and characterized. A protocol has been developed for the introduction of CNPs into photolithographic resin. Printed samples of complex geometry. It is shown that the printed samples are amenable to polishing, have pro-oxidant properties, and are able to prevent damage to biopolymers. Printed samples inhibit the development of bacteria and cause loss of viability. At the same time, the printed samples do not affect the development of mammalian cells. The obtained resins based on PMMA with CNPs can potentially serve as the basis for the creation of non-toxic materials in biomedicine and pharmacology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser-Ablation Synthesis of Nanoparticles · Carbon Nanotubes in Composites · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Prokhorov General Physics Institute of the Russian Academy of Sciences, Vavilov St. 38, 119991 Moscow, Russia

Department of Fundamental Sciences, Bauman Moscow State Technical University, 2ya Baumanskaya St. 5/1, 105005 Moscow, Russia

Federal Scientific Agroengineering Center VIM, 109428 Moscow, Russia

Department of Scientific Research, Gorbatov Research Center for Food Systems, Talalikhin St. 26, 109316 Moscow, Russia

Faculty of Biotechnology and Food Engineering, Ural State Agrarian University, Karl Liebknecht St. 42, 620075 Yekaterinburg, Russia

Department of Biochemistry, Cell Biology and Microbiology, Mari State University, pl. Lenina 1, 424001 Yoshkar-Ola, Russia

Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences (IMET RAS), Leninsky Prospekt 49, 119334 Moscow, Russia

Federal Research Center “Kazan Scientific Center of the Russian Academy of Sciences”, Lobachevskogo St. 2/31, 420088 Kazan, Russia

Institute of Biology and Biomedicine, Lobachevsky State University of Nizhny Novgorod Institute, Gagarin av. 23, 603105 Nizhny Novgorod, Russia

Funding

a grant from the Ministry of Science and Higher Education of the Russian Federation

References (92)

Show source-provided references
1. Improvements in the mechanical and thermal characteristics of polymer matrix composites reinforced with various nanofillers: A brief review10.1016/j.matpr.2023.07.032 ↗
2. Shabalina, A.V., Kozlov, V.A., Popov, I.A., and Gudkov, S.V. (2024). A Review on Recently Developed Antibacterial Composites of Inorganic Nanoparticles and Non-Hydrogel Polymers for Biomedical Applications. Nanomaterials, 14.10.3390/nano14211753 ↗
3. Musa, A.A., Bello, A., Adams, S.M., Onwualu, A.P., Anye, V.C., Bello, K.A., and Obianyo, I.I. (2025). Nano-Enhanced Polymer Composite Materials: A Review of Current Advancements and Challenges. Polymers, 17.10.3390/polym17070893 ↗
4. Metal and Metal Oxides Nanoparticles as Nanofillers for Biodegradable Polymers10.1002/cphc.202300823 ↗
5. Improving the optical, thermal, mechanical, electrical properties and antibacterial activity of PVA-chitosan by biosynthesized Ag nanoparticles: Eco-friendly nanocomposites for food packaging applications10.1016/j.ijbiomac.2024.130668 ↗
6. Inhibition of Crystal Nucleation and Growth: A Review10.1021/acs.cgd.3c01345 ↗
7. Crystallization and performance evolution of PHBV nanocomposites through annealing: The role of surface modification of CNCs10.1016/j.polymer.2024.127352 ↗
8. Palamarchuk, A., Yudaev, P., and Chistyakov, E. (2024). Polymer Concretes Based on Various Resins: Modern Research and Modeling of Mechanical Properties. J. Compos. Sci., 8.10.3390/jcs8120503 ↗
9. Mesoporous Polydopamine Nanoparticles: Unlocking Their Potential for Thermo-Oxidative Stabilization of Polypropylene10.1002/app.57637 ↗
10. Modern physical methods and technologies in agriculture10.3367/UFNe.2023.09.039577 ↗
11. Nanotechnology in food packaging materials: Role and application of nanoparticles10.1039/D4RA03711A ↗
12. Vodyashkin, A.A., Makeev, M.O., and Mikhalev, P.A. (2025). Inkjet Printing Is a Promising Method of Dyeing Polymer Textile Materials. Polymers, 17.10.3390/polym17060756 ↗
13. Ramos, A., Angel, V.G., Siqueiros, M., Sahagun, T., Gonzalez, L., and Ballesteros, R. (2025). Reviewing Additive Manufacturing Techniques: Material Trends and Weight Optimization Possibilities Through Innovative Printing Patterns. Materials, 18.10.3390/ma18061377 ↗
14. In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing
15. Design and manufacture of propellers for small unmanned aerial vehicles10.1139/juvs-2014-0019 ↗
16. Nanotechnology-Based Antimicrobial and Antiviral Surface Coating Strategies10.3390/prosthesis3010005 ↗
17. Raghunathan, V., Ayyappan, V., Rangappa, S.M., and Siengchin, S. (2026). Tribological behavior of polymeric composites for automobile applications. Sustainable Composites for Automotive Engineering, Woodhead Publishing.
18. Optical transmission of PMMA optical fibres exposed to high intensity UVA and visible blue light10.1016/j.optlaseng.2009.11.012 ↗
19. PMMA: A key macromolecular component for dielectric low-κ hybrid inorganic–organic polymer films10.1016/j.eurpolymj.2006.12.012 ↗
20. Comparison of mechanical properties of polymethyl methacrylate of different mixing ratios10.3109/03091902.2010.525686 ↗
21. Effect of moisture exposure on scratch resistance of PMMA10.1016/j.triboint.2013.08.012 ↗
22. Solubility of Polymethyl Methacrylate in Organic Solvents10.1007/s11167-005-0564-9 ↗
23. Microbial adherence on poly(methyl methacrylate) (PMMA) surfaces10.1002/jbm.820260206 ↗
24. Antimicrobial Polymers with Metal Nanoparticles10.3390/ijms16012099 ↗
25. Khdary, N.H., Almuarqab, B.T., and El Enany, G. (2023). Nanoparticle-Embedded Polymers and Their Applications: A Review. Membranes, 13.10.3390/membranes13050537 ↗
26. Altammar, K.A. (2023). A review on nanoparticles: Characteristics, synthesis, applications, and challenges. Front. Microbiol., 14.10.3389/fmicb.2023.1155622 ↗
27. Carbon nanotube incorporation in PMMA to prevent microbial adhesion10.1038/s41598-019-41381-0 ↗
28. PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites10.1016/j.carbon.2019.10.075 ↗
29. Effects of carbon nanomaterials modified hexaphenoxycyclotriphosphazene on the properties of polymethyl methacrylate10.25259/AJC_313_2025 ↗
30. Biologically Inspired Nanoporous PAN/PMMA/β-CD Carbon Fibers for Efficient Microwave Absorption10.1021/acsanm.3c05523 ↗
31. Carbon-Dot-Containing Poly(methyl methacrylate) for Highly Dielectric Nanomaterials10.1021/acsanm.2c05486 ↗
32. Carbon nanotube reinforced 3D printed PMMA filaments: Mechanical enhancement through experimental and multi-scale modeling10.1016/j.matchemphys.2025.131194 ↗
33. Incorporation of multi-walled carbon nanotubes to PMMA bone cement improves cytocompatibility and osseointegration10.1016/j.msec.2019.109823 ↗
34. Al Thaher, Y., Khalil, R., Abdelghany, S., and Salem, M.S. (2022). Antimicrobial PMMA Bone Cement Containing Long Releasing Multi-Walled Carbon Nanotubes. Nanomaterials, 12.10.3390/nano12081381 ↗
35. Elbakyan, L., and Zaporotskova, I. (2024). Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review. Polymers, 16.10.3390/polym16091242 ↗
36. Díez-Pascual, A.M. (2022). PMMA-Based Nanocomposites for Odontology Applications: A State-of-the-Art. Int. J. Mol. Sci., 23.10.3390/ijms231810288 ↗
37. Gaur, M., Misra, C., Yadav, A.B., Swaroop, S., Maolmhuaidh, F., Bechelany, M., and Barhoum, A. (2021). Biomedical Applications of Carbon Nanomaterials: Fullerenes, Quantum Dots, Nanotubes, Nanofibers, and Graphene. Materials, 14.10.3390/ma14205978 ↗
38. Recent Progress of Amorphous Nanomaterials10.1021/acs.chemrev.3c00229 ↗
39. Protein–nanoparticle interactions and a new insight10.1039/D0SM02050H ↗
40. Amorphous Carbon Impurities Play an Active Role in Redox Processes of Carbon Nanotubes10.1021/jp209734t ↗
41. Comparative study of membranotropic action of single- and multi-walled carbon nanotubes10.1016/j.jbiosc.2012.12.016 ↗
42. Adsorptive and structural characteristics of carbon sorbents10.1134/S0020168511100098 ↗
43. Effect of amino acids on X-ray-induced hydrogen peroxide and hydroxyl radical formation in water and 8-oxoguanine in DNA
44. Coumarin-3-Carboxylic Acid as a Detector for Hydroxyl Radicals Generated Chemically and by Gamma Radiation10.2307/3579734 ↗
45. Biocompatibility of new materials based on nano-structured nitinol with titanium and tantalum composite surface layers: Experimental analysis in vitro and in vivo10.1007/s10856-018-6039-3 ↗
46. Burmistrov, D.E., Serov, D.A., Baimler, I.V., Gritsaeva, A.V., Chapala, P., Simakin, A.V., Astashev, M.E., Karmanova, E.E., Dubinin, M.V., and Nizameeva, G.R. (2025). Polymethyl Methacrylate-like Photopolymer Resin with Titanium Metal Nanoparticles Is a Promising Material for Biomedical Applications. Polymers, 17.10.3390/polym17131830 ↗
47. The application of flow cytometry to the study of bacterial responses to antibiotics10.1099/00222615-39-2-147 ↗
48. Mechanical, physical–chemical and biological properties of the new Ti–30Nb–13Ta–5Zr alloy10.1007/s10853-020-05020-8 ↗
49. Physical methods for preparation of nanomaterials, their characterization and applications: A review10.1007/s43994-024-00165-7 ↗
50. Baimler, I.V., Simakin, A.V., Dorokhov, A.S., and Gudkov, S.V. (2024). Mini-review on laser-induced nanoparticle heating and melting. Front. Chem., 12.10.3389/fchem.2024.1463612 ↗
51. Preparation of carbon nanoparticles with strong optical limiting properties by laser ablation in water10.1063/1.1637933 ↗
52. Pulsed laser ablation synthesis of carbon nanoparticles in vacuum10.1016/j.jpcs.2017.01.015 ↗
53. Growth mechanisms for single-wall carbon nanotubes in a laser-ablation process10.1007/s003390100761 ↗
54. Fullerene C20 synthesis in carbon plasma produced by Nd:YAG laser ablation10.1007/s13204-025-03115-9 ↗
55. Altuwirqi, R.M. (2022). Graphene Nanostructures by Pulsed Laser Ablation in Liquids: A Review. Materials, 15.10.3390/ma15175925 ↗
56. mSLA-based 3D printing of acrylated epoxidized soybean oil—Nano-hydroxyapatite composites for bone repair10.1016/j.msec.2021.112456 ↗
57. She, Y., Tang, J., Wang, C., Wang, Z., Huang, Z., and Yang, Y. (2023). Nano-Additive Manufacturing and Non-Destructive Testing of Nanocomposites. Nanomaterials, 13.10.3390/nano13202741 ↗
58. AlGhamdi, M.A., Alatiyyah, F.M., Almedarham, R.F., Al Dawood, Z.H., Alshaikhnasser, F.Y., Alboryh, S.Y., Khan, S.Q., Abualsaud, R., and Gad, M.M. (2024). Impact of Nanoparticle Addition on the Surface and Color Properties of Three-Dimensional (3D) Printed Polymer-Based Provisional Restorations. Nanomaterials, 14.10.3390/nano14080665 ↗
59. Bellahsene, H., Sene, S., Félix, G., Larionova, J., Ferrari, M., and Guari, Y. (2025). A Comprehensive Review of the Nano-Abrasives Key Parameters Influencing the Performance in Chemical Mechanical Polishing. Nanomaterials, 15.10.3390/nano15171366 ↗
60. Hwang, S., Park, J., and Kim, W. (2024). The Stability Evaluation of Ceria Slurry Using Polymer Dispersants with Varying Contents for Chemical Mechanical Polishing Process. Polymers, 16.10.20944/preprints202412.0013.v1 ↗
61. Rahman, M.M., Khan, K.H., Parvez, M.M.H., Irizarry, N., and Uddin, M.N. (2025). Polymer Nanocomposites with Optimized Nanoparticle Dispersion and Enhanced Functionalities for Industrial Applications. Processes, 13.10.3390/pr13040994 ↗
62. Nano-engineering of a thermoplastic compound with CuO nanoparticles for the development of safe antimicrobial and anti-biofouling fish cage nets10.1039/D5RA02611C ↗
63. Eltaib, L. (2025). Polymeric Nanoparticles in Targeted Drug Delivery: Unveiling the Impact of Polymer Characterization and Fabrication. Polymers, 17.10.3390/polym17070833 ↗
64. Li, J., Liang, M., Zhao, X., Zhou, S., and Zou, H. (2025). Assessing the Influence of Inorganic Nanoparticles on the Mechanical and Tribological Performance of PPS-Based Composites: A Comparative Study. Polymers, 17.10.3390/polym17192573 ↗
65. High reflectance ta-C coatings in the extreme ultraviolet10.1364/OE.21.027537 ↗
66. Refractive index measurements of poly (methyl methacrylate)(PMMA) from 0.4–1.6 μm10.1364/AO.54.00F139 ↗
67. Photopolymerization Reactions: On the Way to a Green and Sustainable Chemistry10.3390/app3020490 ↗
68. Müller, M., Urban, J., Svobodová, J., and Mishra, R.K. (2025). Modification of the Mechanical Properties of Photosensitive Resin by Using Biobased Fillers During Stereolithography (SLA) 3D Printing. Materials, 18.10.3390/ma18122699 ↗
69. Studying the Tribological and Mechanical Properties of the PMMA Nano Composite Coating
70. Dovzhenko, N.V., Chelomin, V.P., Kukla, S.P., Slobodskova, V.V., and Mazur, A.A. (2025). Enhanced Toxicity of Polymethylmethacrylate Microparticles on Cells and Tissue of the Marine Mussel Mytilus trossulus After UV Irradiation. Toxics, 13.10.3390/toxics13100818 ↗
71. Unmodified hydrated С60 fullerene molecules exhibit antioxidant properties, prevent damage to DNA and proteins induced by reactive oxygen species and protect mice against injuries caused by radiation-induced oxidative stress10.1016/j.nano.2018.09.001 ↗
72. Dos Santos, F.K.F., Júnior, A., Filho, A.L.N., Fonseca, C.J.N., Isidorio, D.K.M., Araújo, F.A., Oliveira, P.H.A., and Veiga Júnior, V.F.D. (2024). Graphene and Natural Products: A Review of Antioxidant Properties in Graphene Oxide Reduction. Int. J. Mol. Sci., 25.10.3390/ijms25105182 ↗
73. Antioxidant Single-Walled Carbon Nanotubes10.1021/ja805721p ↗
74. Tang, N., Ding, Z., Zhang, J., Cai, Y., and Bao, X. (2023). Recent advances of antioxidant low-dimensional carbon materials for biomedical applications. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1121477 ↗
75. Hydrothermal carbonization synthesis of amorphous carbon nanoparticles (15–150 nm) with fine-tuning of the size, bulk order, and the consequent impact on antioxidant and photothermal properties10.1039/D4NA00923A ↗
76. The Acceleration of Blood Plasma Clot Lysis in the Presence of Hydrated C60 Fullerene Nanostructures in Super-Small Concentration10.1080/15363831003785257 ↗
77. C60 as a radical sponge10.1021/ja00037a064 ↗
78. Oxidative Stress and Free-Radical Oxidation in BCG Granulomatosis Development10.1155/2013/452546 ↗
79. The role of peroxiredoxin 6 in neutralization of X-ray mediated oxidative stress: Effects on gene expression, preservation of radiosensitive tissues and postradiation survival of animals10.1080/10715762.2017.1289377 ↗
80. Metformin mitigates radiation toxicity exerting antioxidant and genoprotective properties10.1007/s00210-023-02466-w ↗
81. Mechanisms of Antioxidant Protection of Low-Density Lipoprotein Particles Against Free Radical Oxidation
82. Protection of mice against X-ray injuries by the post-irradiation administration of guanosine and inosine10.1080/09553000802641144 ↗
83. CeO2 Nanoparticles Initiate Selective Radiation-Induced Death of Cancer Cells through Redox, Cell Cycle, and DNA Repair Disruptions10.1021/acsanm.5c03960 ↗
84. Formation of long-lived reactive species of blood serum proteins induced by low-intensity irradiation of helium-neon laser and their involvement in the generation of reactive oxygen species10.1016/j.jphotobiol.2017.09.012 ↗
85. Guanosine and inosine (riboxin) eliminate the long-lived protein radicals induced X-ray radiation10.1134/S1607672907020032 ↗
86. Long-lived reactive species on free-radical-damaged proteins10.1042/bj2820621 ↗
87. Belov, S.V., Danyleiko, Y.K., Glinushkin, A.P., Kalinitchenko, V.P., Egorov, A.V., Sidorov, V.A., Konchekov, E.M., Gudkov, S.V., Dorokhov, A.S., and Lobachevsky, Y.P. (2021). An Activated Potassium Phosphate Fertilizer Solution for Stimulating the Growth of Agricultural Plants. Front. Phys., 8.10.3389/fphy.2020.618320 ↗
88. Carbon Dot Based Carbon Nanoparticles as Potent Antimicrobial, Antiviral, and Anticancer Agents10.1021/acsomega.3c05537 ↗
89. Antibacterial surface design—Contact kill10.1016/j.progsurf.2016.09.001 ↗
90. Carbon Dots as Potent Antimicrobial Agents10.7150/thno.39863 ↗
91. Size-dependent antibacterial of carbon dots by selective absorption and differential oxidative stress of bacteria10.1016/j.jcis.2022.12.025 ↗
92. Pacurari, M., Lowe, K., Tchounwou, P.B., and Kafoury, R. (2016). A Review on the Respiratory System Toxicity of Carbon Nanoparticles. Int. J. Environ. Res. Public Health, 13.10.3390/ijerph13030325 ↗