journal article·2025-11-20Open access

Comparative Evaluation of Color Stability and Fracture Resistance of CAD/CAM and Chairside Provisional Restorations: An In Vitro Study

Florina Titihazan, Ioana Veja, Cristian Zaharia, Tareq Hajaj, Cosmin Sinescu, George Dumitru Constantin, Mihai Rominu

Journal of Functional Biomaterials· Volume 16· Issue 11

Abstract

Background and Objectives: Provisional restorations are essential in fixed prosthodontics, ensuring esthetics, function, and biological protection during treatment. Recent advances in CAD/CAM technologies have enabled the fabrication of provisional materials with enhanced color stability and fracture resistance compared to conventional chairside polymeric materials. This study aimed to compare the color stability and fracture strength of provisional crowns fabricated using CAD/CAM and a conventional direct chairside technique. Materials and Methods: A total of 40 provisional crowns (four materials, n = 10 each group) were fabricated for a mandibular molar 3.6 using two workflows: CAD/CAM-milled poly(methyl methacrylate) (PMMA), high-impact polymer composite (HIPC; Bredent), and Ambarino composite (Creamet), and directly fabricated 3M™ Protemp™ (Scutan technique), respectively. Color stability was evaluated after seven-day immersion in coffee and red wine at 37 °C using a spectrophotometer (CIE L*a*b* system). Fracture resistance (Fmax) was measured under axial load in a universal testing machine. Data were analyzed by one-way ANOVA and Tukey’s HSD (α = 0.05). Results: Significant differences were observed among materials (F(3,36) = 212.6, p < 0.001). HIPC showed the highest mean fracture resistance (2068.9 ± 104.0 N), followed by PMMA (1215.8 ± 61.4 N) and 3M™ Protemp™ (1183.4 ± 86.4 N), while Ambarino exhibited the lowest (555.4 ± 25.4 N). Regarding color stability, Ambarino demonstrated the smallest ΔE* (1.1 ± 0.2), followed by PMMA (2.0 ± 0.3), HIPC (2.8 ± 0.3), and Protemp™ (4.9 ± 0.4). Only Protemp™ exceeded the clinical perceptibility threshold (ΔE* > 3.3). Conclusions: Both manufacturing methods and material compositions significantly influence the optical and mechanical properties of provisional restorations. CAD/CAM-milled HIPC and PMMA provided superior fracture strength and clinically acceptable color stability, suggesting their suitability for long-term or high-load temporary crowns compared with chairside-fabricated composites, particularly in posterior regions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prostheses Technology and Dental Materials, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Research Center in Dental Medicine Using Conventional and Alternative Technologies, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy of Timisoara, 9 Revolutiei 1989 Ave, 300070 Timisoara, Romania

Doctoral School, “Victor Babes” University of Medicine and Pharmacy Timisoara, Eftimie Murgu Square 2, 300041 Timisoara, Romania

Department of Dental Medicine, Faculty of Dentistry, “Vasile Goldiș” Western University of Arad, 310025 Arad, Romania

Discipline of Clinical Skills, Department I Nursing, Victor Babeș University of Medicine and Pharmacy, 300041 Timisoara, Romania

Center for Advanced Research in Cardiovascular Pathology and Hemostaseology, “Victor Babes” University of Medicine and Pharmacy Timisoara, 300041 Timisoara, Romania

Funding

“Victor Babeș” University of Medicine and Pharmacy

References (48)

Show source-provided references
1. The prosthodontic management of endodontically treated teeth: A literature review. Part I. Success and failure data, treatment concepts10.1111/j.1532-849X.1994.tb00162.x ↗
2. Rosenstiel, S.F., Land, M.F., and Fujimoto, J. (2016). Contemporary Fixed Prosthodontics, Elsevier. [5th ed.].
3. Misch, C.E., Perez, H.A., and Sato, Y. (2015). Contemporary Implant Dentistry, Mosby. [4th ed.].
4. Shillingburg, H.T., Hobo, S., Whitsett, L., Jacobi, R., and Brackett, S. (2012). Fundamentals of Fixed Prosthodontics, Quintessence Publishing. [4th ed.].
5. Young, D.A., and Hicks, M.J. (2014). Provisional Restorations in Fundamentals of Operative Dentistry: A Contemporary Approach, Quintessence Publishing. Fusayama’s Methodology Revisited.
6. Magne, P., and Belser, U.C. (2017). Bonded Porcelain Restorations in the Anterior Dentition: A Biomimetic Approach, Quintessence Publishing.
7. Provisional restorations in soft tissue management around dental implants10.1034/j.1600-0757.2001.027001139.x ↗
8. CEREC CAD/CAM Chairside System
9. Digital dentistry: An overview of recent developments for CAD/CAM generated restorations10.1038/sj.bdj.2008.350 ↗
10. Bonilla-Represa, V., Abalos-Labruzzi, C., Herrera-Martinez, M., and Guerrero-Pérez, M.O. (2020). Nanomaterials in Dentistry: State of the Art and Future Challenges. Nanomaterials, 10.10.20944/preprints202008.0075.v1 ↗
11. Digital dentistry: Innovation for restorative treatment
12. Mechanical properties of polymer-infiltrated-ceramic-network materials10.1016/j.dental.2013.01.002 ↗
13. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up
14. In vivo wear of three types of veneering materials using implant-supported restorations: A method evaluation10.1046/j.0909-8836.2001.101177.x ↗
15. A systematic review of the survival and complication rates of zirconia-ceramic and metal-ceramic multiple-unit fixed dental prostheses10.1111/clr.13277 ↗
16. Lee, H.-J., Jeon, J., Moon, H.S., and Oh, K.C. (2021). Digital Workflow to Fabricate Complete Dentures for Edentulous Patients Using a Reversing and Superimposing Technique. Appl. Sci., 11.10.3390/app11135786 ↗
17. The Evaluation of the Prosthetic Preparations Finish Lines for Provisional Crowns with the Impact on Periodontal Health
18. Correlation between polymerization shrinkage and marginal fit of temporary crowns10.1016/j.dental.2008.07.001 ↗
19. Effect of resin surface sealers on improvement of stain resistance for a composite provisional material10.1111/j.1708-8240.2003.tb00292.x ↗
20. Chitpattanakul, P., Prawatvatchara, W., Limpuangthip, N., Katheng, A., Uasuwan, P., and Boonpitak, K. (2025). Effect of various solvents on the repairability of aged CAD/CAM provisional restorative materials with flowable resin composite: An in vitro study. BMC Oral Health, 25.10.1186/s12903-025-05731-x ↗
21. In vitro study of fracture strength of provisional crown materials10.4047/jap.2015.7.1.27 ↗
22. In vitro evaluation of surface roughness, color stability, and color masking of provisional restoration materials for veneers and crowns
23. Color stability of provisional prosthodontic materials
24. Current ceramic materials and systems with clinical ecommendations: A systematic review10.1016/S0022-3913(07)60124-3 ↗
25. Anusavice, K.J. (2013). Phillips’ Science of Dental Materials, Saunders. [12th ed.].
26. Color stability and surface roughness of polished anterior restorative materials10.4012/dmj.2014-344 ↗
27. Powers, J.M., and Sakaguchi, R.L. (2013). Craig’s Restorative Dental Materials, Elsevier. [14th ed.].
28. Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load10.1016/j.dental.2009.11.152 ↗
29. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature10.1016/S0109-5641(97)80038-3 ↗
30. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials10.1016/j.jdent.2004.10.018 ↗
31. Evaluation of Color Stability and Translucency of Different Composite Resins Exposed to Alcohol10.4103/njcp.njcp_90_23 ↗
32. Cappare, P., Sannino, G., Minoli, M., Montemezzi, P., and Ferrini, F. (2019). Conventional versus Digital Impressions for Full Arch Screw-Retained Maxillary Rehabilitations: A Randomized Clinical Trial. Int. J. Environ. Res. Public Health, 16.10.3390/ijerph16050829 ↗
33. Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry10.1111/jopr.12801 ↗
34. A Micro-computed Tomography Analysis of Marginal and Internal Fit of Endocrowns Fabricated from Three CAD/CAM Materials10.2341/21-105-L ↗
35. Saravi, B., Vollmer, A., Hartmann, M., Lang, G., Kohal, R.-J., Boeker, M., and Patzelt, S.B.M. (2021). Clinical Performance of CAD/CAM All-Ceramic Tooth-Supported Fixed Dental Prostheses: A Systematic Review and Meta-Analysis. Materials, 14.10.20944/preprints202105.0296.v1 ↗
36. Advances in Dental Restorations: A Comprehensive Review of Machinable and 3D-Printed Ceramic-Reinforced Composites10.1111/jerd.13371 ↗
37. Hajaj, T., Lile, I.E., Veja, I., Titihazan, F., Rominu, M., Negruțiu, M.L., Sinescu, C., Novac, A.C., Talpoș-Niculescu, S., and Zaharia, C. (2025). Influence of Pontic Length on the Structural Integrity of Zirconia Fixed Partial Dentures (FPDs). J. Funct. Biomater., 16.10.3390/jfb16040116 ↗
38. Hajaj, T., Marian, D., Zaharia, C., Niculescu, S.T., Negru, R.M., Titihazan, F., Rominu, M., Sinescu, C., Novac, A.C., and Dobrota, G. (2025). Fracture Resistance of CAD/CAM-Fabricated Zirconia and Lithium Disilicate Crowns with Different Margin Designs: Implications for Digital Dentistry. J. Funct. Biomater., 16.10.3390/jfb16060205 ↗
39. Hajaj, T., Lile, I.E., Negru, R.M., Niculescu, S.T., Stuparu, S., Rominu, M., Sinescu, C., Albu, P., Titihazan, F., and Veja, I. (2025). Adhesive Performance of Zirconia and Lithium Disilicate Maryland Cantilever Restorations on Prepared and Non-Prepared Abutment Teeth: An In Vitro Comparative Study. Biomimetics, 10.10.3390/biomimetics10070413 ↗
40. Lile, I.E., Hajaj, T., Constantin, G.D., Niculescu, S.T., Marian, D., Stana, O., Zaharia, C., and Veja, I. (2025). Association Between Occlusal Interferences, Temporomandibular Joint Dysfunction, and Bruxism in Romanian Adults. J. Clin. Med., 14.10.3390/jcm14165612 ↗
41. Niculescu, S.T., Veja, I., Constantin, G.-D., Lile, I.E., Armeniakos, C., Munteanu, I.R., and Hajaj, T. (2025). Comparative In Vitro Evaluation of Marginal Sealing in Class I Composite Restorations Using Fifth- and Seventh-Generation Adhesives. J. Funct. Biomater., 16.10.3390/jfb16080301 ↗
42. Color Stability and Surface Roughness of 3D-Printed, CAD/CAM-Milled, and Conventional Denture Resins: An In Vitro Comparative Study
43. Mechanical Properties and Fracture Resistance of CAD/CAM Provisional Materials: An In Vitro Study
44. Effects of Printing Orientation and Post-Curing on the Flexural Strength of 3D-Printed Resin Materials for Provisional Restorations
45. Fracture Resistance and Microhardness of CAD/CAM and Conventional Interim Restorations Fabricated from Different Materials
46. Saini, R.S., Gurumurthy, V., Quadri, S.A., Bavabeedu, S.S., Abdelaziz, K.M., Okshah, A., Alshadidi, A.A.F., Yessayan, L., Mosaddad, S.A., and Heboyan, A. (2024). The flexural strength of 3D-printed provisional restorations fabricated with different resins: A systematic review and meta-analysis. BMC Oral Health, 24.10.1186/s12903-023-03826-x ↗
47. Color Stability of Provisional Restorative Materials Exposed to Different Beverages: An In Vitro Study
48. Evaluation of Mechanical and Optical Properties of Current High-Performance CAD/CAM Polymers for Long-Term Provisional Restorations