journal article·2025-08-12Open access

Shear Bond Strength of Self-Adhesive and Self-Etching Resin Cements to Dentin for Indirect Restorations

Janet Kirilova, Georgi Veselinov Iliev, Sevda Yantcheva, Elitsa Deliverska, Viktoria Petrova

Abstract

This study assessed and compared the shear bond strength of self-adhesive and self-etching resin cements for indirect aesthetic restorations to dentin. Four different materials, lithium disilicate ceramics, zirconia ceramics, polymethyl methacrylate (PMMA) composites, and hybrid materials, were used for indirect restorations cemented to dentin. The null hypothesis was that there would be no differences in shear bond strength between the investigated materials. Eighty extracted human molars were used. Eighty dentin specimens with a flat surface were prepared and randomly distributed in groups of 10 (n = 10). From each material (Cerasmart 270, Initial LiSi Blok, Katana ZR Noritake, and Crowntec Next Dent), 20 blocks were made and cemented to the dentin samples. Half of the blocks from each material were cemented to dentin using self-etching resin cement (Panavia V5), and the other half using self-adhesive resin cement (i-CEM). After the specimens were prepared, a laboratory test was conducted to evaluate the shear bond strength. The fracture type was determined using a light microscope, and SEM confirmed the results. The results were statistically analysed. All materials cemented with self-etching cements (Panavia V5) showed statistically higher shear strength values than those cemented with self-adhesive resin cement (i-CEM). In the specimen groups where self-adhesive cement (i-CEM) was used, Cerasmart 270 bonded statistically better. A statistical difference was found between all groups of materials cemented with self-etching cement. The Initial LiSi Block showed the strongest bond, followed by Katana Zr Noritake, Crowntec NextDent, and Cerasmart 270. Adhesion fracture to dentin was observed for all groups cemented with i-CEM. This study highlights the superior performance of self-etching cements in terms of shear bond strength. 10-Methacryloyloxydecyl dihydrogen phosphate (10-MDP), a functional monomer, was found to enhance adhesion strength significantly. However, using self-adhesive cements was associated with a weaker bond to dentin, highlighting the importance of the right cementing agent in restorative dentistry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Conservative Dentistry, Faculty of Dental Medicine, Medical University, 1000 Sofia, Bulgaria

Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University, 1000 Sofia, Bulgaria

Department of Dental, Oral and Maxillofacial Surgery, Faculty of Dental Medicine, Medical University, 1000 Sofia, Bulgaria

Funding

Council of Medical Sciences at the Medical University of Sofia, Bulgaria

References (43)

Show source-provided references
1. Topdağı, B. (2025). Optimization of Bond Strength Between Heat-Polymerized PMMA and Contemporary CAD/CAM Framework Materials: A Comparative In Vitro Study. Polymers, 17.10.3390/polym17111488 ↗
2. Unalan Degirmenci, B., Degirmenci, A., and Seyfioglu Polat, Z. (2025). The Influence of Thermocycling and Ultraviolet Aging on Surface Characteristics and the Repair Bond Strength of CAD/CAM Resin Nanoceramics. J. Funct. Biomater., 16.10.3390/jfb16050156 ↗
3. Can CAD/CAM resin blocks be considered as substitute for conventional resins?10.1016/j.dental.2017.09.003 ↗
4. Clinical Performance of Posterior Inlay-Retained and Wing-Retained Monolithic Zirconia Resin-Bonded Fixed Partial Dentures: Stage One Results of a Randomized Controlled Trial10.1111/jopr.13258 ↗
5. Mechanical properties of resin-ceramic CAD/CAM restorative materials10.1016/j.prosdent.2015.04.016 ↗
6. Dikici, B., Türkeş Başaran, E., Şirinsükan, N., and Can, E. (2025). Repair Bond Strength and Surface Roughness Evaluation of CAD/CAM Materials After Various Surface Pretreatments. Coatings, 15.10.3390/coatings15040432 ↗
7. Effect of three surface treatments on the adhesive properties of indirect composite restorations
8. Effect of surface treatments of laboratory-fabricated composites on the microtensile bond strength to a luting resin cement10.1590/S1678-77572004000100009 ↗
9. Silane heat treatment could eliminate the hydrofluoric acid etching of lithium disilicate overlays: A four-year follow up
10. Effect of adhesive resin cements on bond strength of ceramic core materials to dentin10.4103/njcp.njcp_10_17 ↗
11. Adhesive cementation of indirect composite inlays and onlays: A literature review
12. Dental Cements for Luting and Bonding Restorations: Self-Adhesive Resin Cements10.1016/j.cden.2017.06.006 ↗
13. Immediate dentin sealing in indirect restorations of dental fractures in paediatric dentistry
14. Evaluation of micro-tensile bond strength of indirect resin composite inlay to dentin
15. Self-adhesive resin cements: A new perspective in luting technology10.12968/denu.2013.40.9.758 ↗
16. Maletin, A., Knežević, M.J., Koprivica, D.Đ., Veljović, T., Puškar, T., Milekić, B., and Ristić, I. (2023). Dental Resin-Based Luting Materials—Review. Polymers, 15.10.3390/polym15204156 ↗
17. Effects of light attenuation by fiber posts on polymerization of a dual-cured resin cement and microleakage of post-restored teeth10.1016/j.jdent.2011.01.009 ↗
18. Resin-modified Glass-ionomer Setting Reaction Competition10.1177/0022034509355919 ↗
19. Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength10.1016/j.dental.2012.09.006 ↗
20. Two-year clinical evaluation of a self-adhesive luting agent for ceramic inlays
21. Choosing an all-ceramic restorative material: Porcelain fused-to-metal or zirconia-based?10.14219/jada.archive.2007.0239 ↗
22. Considerations for proper selection of dental cements
23. Resin cement selection for different types of fixed partial coverage restorations: A narrative systematic review10.1002/cre2.761 ↗
24. Influence of different surface sreatments to Self-adhesive resin cement to CAD-CAM materials bonding
25. Papadopoulos, K., Pahinis, K., Saltidou, K., Dionysopoulos, D., and Tsitrou, E. (2020). Evaluation of the Surface Characteristics of Dental CAD/CAM Materials after Different Surface Treatments. Materials, 13.10.3390/ma13040981 ↗
26. A comprehensive review of resin luting agents: Bonding mechanisms and polymerisation reactions10.1016/j.sdentj.2023.11.010 ↗
27. Evaluation of the Bond Strength of Self-Etching Adhesive Systems Containing HEMA and 10-MDP Monomers: Bond Strength of Adhesives Containing HEMA and 10-MDP
28. Validity of bond strength tests: A critical review-Part II10.4103/0972-0707.139823 ↗
29. Shear bond strength of glass ionomer and resin-based cements to different types of zirconia10.1111/jerd.12638 ↗
30. Bonding effectiveness to different chemically pre-treated dental zirconia10.1007/s00784-013-1152-7 ↗
31. Shear Bond Strength of Chairside Cad-Cam Blocks to Eroded Dentin10.7126/cumudj.1094553 ↗
32. Micro-shear bond strength of different resin cements to ceramic/glass-polymer CAD-CAM block materials10.1016/j.jpor.2016.02.003 ↗
33. Brunner, K.C., and Özcan, M. (2020). Load bearing capacity and Weibull characteristics of inlay-retained resin-bonded fixed dental prosthesis made of all-ceramic, fiber-reinforced composite and metal-ceramic after cyclic loading. J. Mech. Behav. Biomed. Mater., 109.10.1016/j.jmbbm.2020.103855 ↗
34. Comparison of fit accuracy of pressed lithium disilicate inlays fabricated from wax or resin patterns with conventional and CAD-CAM technologies10.1016/j.prosdent.2018.04.006 ↗
35. Irie, M., Okada, M., Maruo, Y., Nishigawa, G., and Matsumoto, T. (2023). Shear Bond Strength of Resin Luting Materials to Lithium Disilicate Ceramic: Correlation between Flexural Strength and Modulus of Elasticity. Polymers, 15.10.3390/polym15051128 ↗
36. Comparison of the shear bond strength of composite resins with zirconia and titanium using different resin cements10.2186/jpr.JPR_D_20_00299 ↗
37. Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systems10.4012/dmj.2014-159 ↗
38. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: The effect of surface treatments
39. Dentin bond strength of two resin-ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials and five cements after six months storage10.4012/dmj.2016-095 ↗
40. Composite bonding to stainless steel crowns using a new universal bonding and single-bottle systems10.1155/2013/607405 ↗
41. Chemical analyses in dental adhesive technology10.1016/j.jdsr.2012.03.001 ↗
42. Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?
43. Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better?