journal article·2025-06-23Open access

The Impact of As-Built Surface Characteristics of Selective-Laser-Melted Ti-6Al-4V on Early Osteoblastic Response for Potential Dental Applications

Muhammad Hassan Razzaq, Olugbenga Ayeni, Selin Köklü, Kagan Berk, Muhammad Usama Zaheer, Tim Tjardts, Franz Faupel, Salih Veziroglu, Yogendra Kumar Mishra, Mehmet Fatih Aycan, O. Cenk Aktas, Tayebeh Ameri, Sinan Sen

Abstract

This study investigates the potential of Selective Laser Melting (SLM) to tailor the surface characteristics of Ti6Al4V directly during fabrication, eliminating the need for post-processing treatments potentially for dental implants. By adjusting the Volumetric Energy Density (VED) through controlled variations in the laser scanning speed, we achieved customized surface textures at both the micro- and nanoscale levels. SLM samples fabricated at moderate VED levels (50–100 W·mm3/s) exhibited optimized dual-scale surface roughness—a macro-roughness of up to 25.5–27.6 µm and micro-roughness of as low as 58.8–64.2 nm—resulting in significantly enhanced hydrophilicity, with water contact angles (WCAs) decreasing to ~62°, compared to ~80° on a standard grade 5 machined Ti6Al4V plate. The XPS analysis revealed that the surface oxygen content remains relatively stable at low VED values, with no significant increase. The surface topography plays a significant role in influencing the WCA, particularly when the VED values are low (below 200 W·mm3/s) during SLM, indicating the dominant effect of surface morphology over chemistry in these conditions. Biological assays using osteoblast-like MG-63 cells demonstrated that these as-built SLM surfaces supported a 1.5-fold-higher proliferation and improved cytoskeletal organization relative to the control, confirming the enhanced early cellular responses. These results highlight the capability of SLM to engineer bioactive implant surfaces through process-controlled morphology and chemistry, presenting a promising strategy for the next generation of dental implants suitable for immediate placement and osseointegration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Institute for Graduate School of Natural and Applied Sciences, Gazi University, Ankara 06570, Türkiye

Additive Manufacturing Technologies Application and Research Center—EKTAM, Gazi University, Ankara 06560, Türkiye

Chair for Composite Materials, Department of Materials Science, Faculty of Engineering, Kiel University, Kaiserstraße 2, 24143 Kiel, Germany

Department of Orthodontics, University Hospital Schleswig Holstein, Arnold-Heller-Strasse 3, 24105 Kiel, Germany

Chair for Multicomponent Materials, Department of Materials Science, Faculty of Engineering, Kiel University, Kaiserstraße 2, 24143 Kiel, Germany

Kiel Nano, Surface and Interface Science KiNSIS, Kiel University, Christian Albrechts-Platz 4, 24118 Kiel, Germany

Mads Clausen Institute, NanoSYD, University of Southern Denmark, Alsion 2, 6400 Sønderborg, Denmark

Department of Mechanical Engineering, Faculty of Engineering, Gazi University, Ankara 06570, Türkiye

Funding

European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie · Scientific and Technological Research Council of Türkiye (TUBITAK) · Department of Orthodontics, University Hospital Schleswig Holstein, Arnold-Heller-Strasse 3, 24105 Kiel, Germany · ESS lighthouse on hard materials in 3D, SOLID · Denmark, NANOCHEM (national infrastructure UFM 52290–00010B, NANOCHEM, Denmark) · BHJ Fonden and Fabrikant Mads Clausen Fonden, Denmark

References (52)

Show source-provided references
1. Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies10.1016/S1005-0302(12)60016-4 ↗
2. Sun, Z., Yang, Y., Wang, L., Liu, Y., and Li, D. (2022). Enhanced osseointegration properties of SLM-produced titanium implants with dual micro/nano-scale surface topography. Materials, 15.10.3390/ma15217811 ↗
3. Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting10.1016/j.msec.2017.03.066 ↗
4. Additive Manufacturing Techniques in Prosthodontics: Where Do We Currently Stand? A Critical Review
5. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment10.1016/j.msea.2013.10.023 ↗
6. Custom-made, root-analogue direct laser metal forming implant: A case report10.1007/s10103-012-1134-z ↗
7. Dantas, T., Madeira, S., Gasik, M., Vaz, P., and Silva, F. (2021). Customized Root-Analogue Implants: A Review on Outcomes from Clinical Trials and Case Reports. Materials, 14.10.3390/ma14092296 ↗
8. The osteoblastic differentiation of dental pulp stem cells and bone formation on different titanium surface textures10.1016/j.biomaterials.2010.01.056 ↗
9. Böse, M.W.H., Hildebrand, D., Beuer, F., Wesemann, C., and Schwerdtner, P. (2020). Clinical Outcomes of Root-Analogue Implants Restored with Single Crowns or Fixed Dental Prostheses: A Retrospective Case Series. J. Clin. Med., 9.10.3390/jcm9082346 ↗
10. Improving surface quality in selective laser melting based tool making10.1007/s10845-021-01744-9 ↗
11. Łosiewicz, B., Osak, P., Nowińska, D., and Maszybrocka, J. (2025). Developments in Dental Implant Surface Modification. Coatings, 15.10.3390/coatings15010109 ↗
12. Du, W., Du, S., Dong, X., Bai, H., Jiang, J., Hao, S., Yang, F., Xiao, Q., Zhang, B., and Ge, J. (2023). Biodegradable silica nanocapsules enable efficient nuclear-targeted delivery of native proteins for cancer therapy. Biomaterials, 294.10.1016/j.biomaterials.2023.122000 ↗
13. Surface roughness control of root analogue dental implants fabricated using selective laser melting
14. Predicting osseointegration by means of implant primary stability10.1111/j.1600-0501.2004.01059.x ↗
15. Oral implant surfaces: Part 1—Review focusing on topographic and chemical properties of different surfaces and in vivo responses to them
16. Xu, Y., Peng, J., Dong, X., Wang, Q., and Zhang, X. (2016). Enhanced Osseointegration by the Hierarchical Micro-Nano Topography on Selective Laser Melting Titanium Surface. Front. Bioeng. Biotechnol., 4.
17. On implant surfaces: A review of current knowledge and opinions
18. The potential of 3D printing technologies for customized root-analogue dental implants: A case report
19. Balling phenomena in selective laser melting (SLM) of metal powder
20. Research status of laser additive manufacturing for metal: A review10.1016/j.jmrt.2021.08.050 ↗
21. Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness, and micropores for manufactured Ti6Al4V parts10.1557/jmr.2020.84 ↗
22. Application of laser re-melting on selective laser melting parts
23. Additive manufacturing of titanium alloys by laser melting for biomedical applications—A review. Proceedings of the Institution of Mechanical Engineers
24. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
25. Heat treatment of Ti6Al4V produced by selective laser melting: Microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
26. Novel tissue-engineered skin equivalent from recombinant human collagen hydrogel and fibroblasts facilitated full-thickness skin defect repair in a mouse model10.1016/j.msec.2021.112469 ↗
27. García-Hernández, C., García-Cabezón, C., González-Diez, F., Ampudia, M., Juanes-Gusano, D., Rodriguez-Cabello, J.C., and Martín-Pedrosa, F. (2025). Effect of processing on microstructure, mechanical properties, corrosion and biocompatibility of additive manufacturing Ti-6Al-4V orthopaedic implants. Sci. Rep., 15.10.1038/s41598-025-98349-6 ↗
28. Investigation of aluminum segregation during selective laser melting of Ti6Al4V due to rapid melting and cooling
29. Impact of compositional variations on the surface chemistry and cellular interactions of titanium alloys
30. Study on the reactivity of Ti-based alloys under elevated temperatures
31. Biocompatibility and corrosion resistance of Ti-6Al-4V alloys produced by SLM for biomedical applications
32. CAD/CAM scaffolds for bone tissue engineering: Investigation of biocompatibility of selective laser melted lightweight titanium10.1049/iet-nbt.2019.0320 ↗
33. Balling phenomenon in metallic laser-based 3D printing process10.1016/j.ijthermalsci.2021.107011 ↗
34. Shi, Y., Zheng, Y., Huang, C., Zhao, S., Li, X., Lu, Y., Wu, Y., Li, P., Wang, L., and Li, Y. (2025). Influence of Processing Parameters on Additively Manufactured Architected Cellular Metals: Emphasis on Biomedical Applications. JFB, 16.10.3390/jfb16020053 ↗
35. Liu, S., and Guo, H. (2020). Balling Behavior of Selective Laser Melting (SLM) Magnesium Alloy. Materials, 13.10.3390/ma13163632 ↗
36. Biological effects of laser grooved titanium surfaces on osteoblasts and soft tissue cells
37. Hasegawa, M., Saruta, J., Hirota, M., Taniyama, T., Sugita, Y., Kubo, K., Ishijima, M., Ikeda, T., Maeda, H., and Ogawa, T. (2020). A Newly Created Meso-, Micro-, and Nano-Scale Rough Titanium Surface Promotes Bone-Implant Integration. Int. J. Mol. Sci., 21.10.3390/ijms21030783 ↗
38. In situ forming, resorbable graft copolymer hydrogels providing controlled drug release10.1002/jbm.a.34443 ↗
39. The role of nanoscale surface modifications on titanium implants: Enhancing osseointegration and bone regeneration
40. Effects of surface roughness on wettability and liquid spreading: A critical analysis
41. The role of oxide layers in improving surface hydrophilicity and biological interactions on titanium alloys
42. XPS analysis of elemental distribution on titanium alloy surfaces
43. High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy10.1007/s11085-017-9770-0 ↗
44. Microstructural evolution and corrosion behavior of Ti–6Al–4V alloy fabricated by laser metal deposition for dental applications10.1016/j.jmrt.2021.07.006 ↗
45. The impact of vanadium ion release on osteogenesis and cellular differentiation in titanium-based implants
46. Assessment of microstructure and wear behavior of aluminum nitrate reinforced surface composite layers synthesized using friction stir processing on copper substrate10.1016/j.surfcoat.2017.05.029 ↗
47. In vitro evaluation of novel titania-containing borate bioactive glass scaffolds10.1002/jbm.a.37012 ↗
48. Surface and depth profiling analysis of titanium oxides in biomedical alloys
49. Analysis of aluminum oxide integration in titanium dioxide matrices: Implications for biomedical coatings
50. Multifunctional alginate nanoparticles containing nitric oxide donor and silver nanoparticles for biomedical applications10.1016/j.msec.2020.110933 ↗
51. High-resolution spectroscopy analysis of titanium alloys: Oxidative layers and surface contaminants
52. Influence of surface hydrophilicity and chemistry on cell viability and behavior: A study on titanium-based materials