journal article·2025-05-13Open access

Animal Experimental Study on Delayed Implantation in a Severely Atrophic Alveolar Ridge Reconstructed Using a 3D-Printed Bioactive Glass Scaffold: A Pilot Study

Lei Deng, Liya Ai, Runxu Li, Wusheng Xu, Lingling Zheng, Chao Wang, Haitao Huang

Abstract

In this study, a scaffold was designed using 3-Matic software 12.0 (Materialise, Leuven, Belgium) and fabricated via Digital Light Processing (DLP) 3D printing technology, followed by a mechanical property evaluation. The scaffold was bilaterally implanted into mandibular bone defect models in four Beagle dogs to facilitate guided alveolar bone regeneration. After 12 weeks, samples were harvested from two dogs for radiographic and histopathological evaluations. In the remaining two dogs, two dental implants were placed into the scaffold sites. After an additional 12 weeks, samples were harvested for further radiographic and histopathological assessments. (1) Compression testing of the scaffold demonstrated a compressive strength of 24.77 ± 2.36 MPa. (2) Three of the implantation sites exhibited poor wound healing and exposure of the bone grafts early post-surgery (4 weeks), with an exposure rate of 37.5%. (3) Micro-CT imaging revealed a uniform distribution of newly formed bone within the scaffold, with an average bone height of 4.05 ± 0.55 mm and a bone volume fraction of 43.93 ± 4.68%. Histopathological analysis demonstrated the presence of vascularized tissue, non-calcified bone, and newly calcified bone within the scaffold. Additionally, newly formed calcified bone and vascularized tissue were observed at the interface between the implant and the scaffold. These findings suggest that DLP 3D-printed A-W bioactive glass scaffolds represent a promising approach for guided alveolar bone regeneration in dental implant applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Stomatology, The First Affiliated Hospital of Dalian Medical University, Dalian 116011, China

Key Laboratory of Biomechanics and Mechanobiology, Ministry of Education, Beijing Advanced Innovation Center for Biomedical Engineering, School of Biological Science and Medical Engineering, School of Engineering Medicine, Beihang University, No. 37, Xueyuan Road, Beijing 100083, China

State Key Laboratory of Virtual Reality Technology and Systems, Beihang University, No. 37, Xueyuan Road, Beijing 100083, China

Funding

Medical-Industrial Union Innovation Fund of the First Affiliated Hospital of Dalian Medical University—Dalian Institute of Chemical Physics · The National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities, CAMS Innovation Fund for Medical Sciences

References (73)

Show source-provided references
1. Velasco-Ortega, E., Del Rocío Jiménez-Martin, I., Moreno-Muñoz, J., Núñez-Márquez, E., Rondón-Romero, J.L., Cabanillas-Balsera, D., Jiménez-Guerra, Á., Ortiz-García, I., López-López, J., and Monsalve-Guil, L. (2022). Long-Term Treatment Outcomes of Implant Prostheses in Partially and Totally Edentulous Patients. Materials, 15.10.3390/ma15144910 ↗
2. Clinical outcomes of dental implants in patients with and without history of periodontitis: A 20-year prospective study10.1111/jcpe.13716 ↗
3. Role of primary stability for successful osseointegration of dental implants: Factors of influence and evaluation
4. The use of intraorally harvested autogenous block grafts for vertical alveolar ridge augmentation: A human study
5. Safety of zygomatic bone harvesting: A prospective study of 32 consecutive patients with simultaneous zygomatic bone grafting and 1-stage implant placement
6. Morbidity after chin bone harvesting—A retrospective long-term follow-up study10.1111/j.1708-8208.2008.00102.x ↗
7. Morbidity of chin bone harvesting10.1034/j.1600-0501.2001.120511.x ↗
8. Bone graft and bone graft substitutes: A review of current technology and applications10.1002/jab.770020307 ↗
9. Mechanisms of guided bone regeneration: A review10.2174/1874210601408010056 ↗
10. Horizontal ridge augmentation using native collagen membrane vs titanium mesh in atrophic maxillary ridges: Randomized clinical trial10.1111/cid.12892 ↗
11. Guided bone regeneration of peri-implant defects with particulated and block xenogenic bone substitutes10.1111/clr.12625 ↗
12. Use of a new cross-linked collagen membrane for the treatment of dehiscence-type defects at titanium implants: A prospective, randomized-controlled double-blinded clinical multicenter study10.1111/j.1600-0501.2008.01689.x ↗
13. Histological assessment of mandibular bone tissue after guided bone regeneration with customized computer-aided design/computer-assisted manufacture titanium mesh in humans: A cohort study10.1111/cid.13025 ↗
14. Assessment of 3-dimensional bone augmentation of severely atrophied maxillary alveolar ridges using patient-specific poly ether-ether ketone (PEEK) sheets10.1111/cid.12890 ↗
15. Polyetheretherketone (PEEK) Implant for the Reconstruction of Severe Destruction in the Maxilla: Case Report10.1097/GOX.0000000000004473 ↗
16. Current barrier membranes: Titanium mesh and other membranes for guided bone regeneration in dental applications10.1016/j.jpor.2012.12.001 ↗
17. Titanium Mesh Exposure in Guided Bone Regeneration Procedures: A Systematic Review and Meta-analysis10.11607/jomi.9098 ↗
18. Bioactive ceramics: The effect of surface reactivity on bone formation and bone cell function10.1016/S0142-9612(99)00181-7 ↗
19. Third-generation biomedical materials10.1126/science.1067404 ↗
20. Mohd, N., Razali, M., Ghazali, M.J., and Abu Kasim, N.H. (2022). 3D-Printed Hydroxyapatite and Tricalcium Phosphates-Based Scaffolds for Alveolar Bone Regeneration in Animal Models: A Scoping Review. Materials, 15.10.3390/ma15072621 ↗
21. Bulina, N.V., Baev, S.G., Makarova, S.V., Vorobyev, A.M., Titkov, A.I., Bessmeltsev, V.P., and Lyakhov, N.Z. (2021). Selective Laser Melting of Hydroxyapatite: Perspectives for 3D Printing of Bioresorbable Ceramic Implants. Materials, 14.10.3390/ma14185425 ↗
22. Kremzer, M., Tomiczek, B., Matula, G., Gocki, M., and Krzemiński, Ł. (2023). Aluminium Matrix Composite Materials Reinforced by 3D-Printed Ceramic Preforms. Materials, 16.10.3390/ma16155473 ↗
23. Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications10.1016/j.actbio.2006.02.004 ↗
24. Direct Ink Writing for High-Efficiency Microwave Attenuation with Nanofibers Alignment10.1021/acsami.2c06567 ↗
25. Mandibular defect reconstruction with the help of mirror imaging coupled with laser stereolithographic modeling technique10.1016/S0929-6646(09)60247-3 ↗
26. Schmidleithner, C., Malferrari, S., Palgrave, R., Bomze, D., Schwentenwein, M., and Kalaskar, D.M. (2019). Application of high resolution DLP stereolithography for fabrication of tricalcium phosphate scaffolds for bone regeneration. Biomed. Mater., 14.10.1088/1748-605X/ab279d ↗
27. Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering10.1177/0022034515588885 ↗
28. Craniofacial vertical bone augmentation: A comparison between 3D printed monolithic monetite blocks and autologous onlay grafts in the rabbit10.1016/j.biomaterials.2009.07.049 ↗
29. Research on the dimensional accuracy of customized bone augmentation combined with 3D-printing individualized titanium mesh: A retrospective case series study10.1111/cid.12966 ↗
30. Large Bone Vertical Augmentation Using a Three-Dimensional Printed TCP/HA Bone Graft: A Pilot Study in Dog Mandible10.1111/cid.12394 ↗
31. Kim, J.W., Yang, B.E., Hong, S.J., Choi, H.G., Byeon, S.J., Lim, H.K., Chung, S.M., Lee, J.H., and Byun, S.H. (2020). Bone Regeneration Capability of 3D Printed Ceramic Scaffolds. Int. J. Mol. Sci., 21.10.3390/ijms21144837 ↗
32. Yang, Z., Wang, C., Gao, H., Jia, L., Zeng, H., Zheng, L., Wang, C., Zhang, H., Wang, L., and Song, J. (2022). Biomechanical Effects of 3D-Printed Bioceramic Scaffolds With Porous Gradient Structures on the Regeneration of Alveolar Bone Defect: A Comprehensive Study. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.882631 ↗
33. Yang, W., Wang, C., Luo, W., Apicella, A., Ji, P., Wang, G., Liu, B., and Fan, Y. (2023). Effectiveness of biomechanically stable pergola-like additively manufactured scaffold for extraskeletal vertical bone augmentation. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1112335 ↗
34. Influence of internal pore architecture on biological and mechanical properties of three-dimensional fiber deposited scaffolds for bone regeneration10.1002/jbm.a.35637 ↗
35. Highly tunable bioactive fiber-reinforced hydrogel for guided bone regeneration10.1016/j.actbio.2020.06.011 ↗
36. Alveolar ridge preservation reduces the need for ancillary bone augmentation in the context of implant therapy10.1002/JPER.22-0030 ↗
37. The Effects of Alveolar Ridge Preservation: A Meta-Analysis10.1111/cid.12364 ↗
38. Strategies for alveolar ridge reconstruction and preservation for implant therapy10.1016/j.jpor.2015.04.005 ↗
39. Influence of wound closure on volume stability with the application of different GBR materials: An in vitro cone-beam computed tomographic study10.5051/jpis.2019.49.1.14 ↗
40. Influence of wound closure on the volume stability of particulate and non-particulate GBR materials: An in vitro cone-beam computed tomographic examination. Part II10.1111/clr.12845 ↗
41. Bone augmentation procedures in localized defects in the alveolar ridge: Clinical results with different bone grafts and bone-substitute materials
42. Ridge preservation of extraction sockets with buccal bone deficiency using poly lactide-co-glycolide coated β-tricalcium phosphate bone grafts: An experimental study in dogs10.1002/JPER.18-0574 ↗
43. Effects of additional collagen in biphasic calcium phosphates: A study in a rabbit calvaria10.1007/s00784-019-03181-8 ↗
44. Biodegradation property of beta-tricalcium phosphate-collagen composite in accordance with bone formation: A comparative study with Bio-Oss Collagen® in a rat critical-size defect model10.1111/j.1708-8208.2012.00467.x ↗
45. Application of 3D Printing Technology in Bone Tissue Engineering: A Review10.2174/18755704MTExsNDcy2 ↗
46. 3D printed porous ceramic scaffolds for bone tissue engineering: A review10.1039/C7BM00315C ↗
47. Improvement of bone regeneration capability of ceramic scaffolds by accelerated release of their calcium ions10.1089/ten.tea.2012.0726 ↗
48. Additive manufacturing techniques for the production of tissue engineering constructs10.1002/term.1635 ↗
49. Tailor-made biopolymers porous scaffold fabrication for tissue engineering: Application of radiant energy in the form of microwave under vacuum10.3233/BME-2008-0552 ↗
50. Fang, Z., Chen, J., Pan, J., Liu, G., and Zhao, C. (2021). The Development Tendency of 3D-Printed Bioceramic Scaffolds for Applications Ranging From Bone Tissue Regeneration to Bone Tumor Therapy. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.754266 ↗
51. 3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy10.1016/j.actbio.2018.08.026 ↗
52. Wu, D., Spanou, A., Diez-Escudero, A., and Persson, C. (2020). 3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling. J. Mech. Behav. Biomed. Mater., 103.10.1016/j.jmbbm.2019.103608 ↗
53. Fused Deposition Modeling 3D-Printed Scaffolds for Bone Tissue Engineering Applications: A Review10.1007/s10439-024-03479-z ↗
54. In vivo biocompatibility and degradation of novel Polycaprolactone-Biphasic Calcium phosphate scaffolds used as a bone substitute10.3233/BME-171727 ↗
55. Development of a PCL/gelatin/chitosan/β-TCP electrospun composite for guided bone regeneration10.1007/s40204-018-0098-x ↗
56. Martinez, J.S., Peterson, S., Hoel, C.A., Erno, D.J., Murray, T., Boyd, L., Her, J.H., McLean, N., Davis, R., and Ginty, F. (2022). High resolution DLP stereolithography to fabricate biocompatible hydroxyapatite structures that support osteogenesis. PloS ONE, 17.10.1371/journal.pone.0272283 ↗
57. Precision and trueness of dental models manufactured with different 3-dimensional printing techniques
58. Alveolar Ridge Augmentation with Three-Dimensional Printed Hydroxyapatite Devices: A Preclinical Study10.11607/prd.3397 ↗
59. Additive manufacturing of ceramic alumina/calcium phosphate structures10.1016/j.matchemphys.2021.125417 ↗
60. DLP printing of hydrogel/calcium phosphate composites for the treatment of bone defects
61. Current state of fabrication technologies and materials for bone tissue engineering10.1016/j.actbio.2018.09.031 ↗
62. A Hybrid Dental Model Concept Utilizing Fused Deposition Modeling and Digital Light Processing 3D Printing10.11607/ijp.6534 ↗
63. Aoki, H. (1994). Medical Applications of Hydroxyapatite, Ishiyaku EuroAmerica.
64. Wilson, J., Hench, L.L., and Greenspan, D. (1995). Bioceramics: Volume 8, Elevier Science.
65. Yamamuro, T., Hench, L.L., and Wilson, J. (1990). Handbook of Bioactive Ceramics, CRC Press.
66. Apatite and wollastonite-containing glass-ceramics for prosthetic application
67. Chemical reaction of bioactive glass and glass-ceramics with a simulated body fluid10.1007/BF00705272 ↗
68. Lee, J.S., Park, T.H., Ryu, J.Y., Kim, D.K., Oh, E.J., Kim, H.M., Shim, J.H., Yun, W.S., Huh, J.B., and Moon, S.H. (2021). Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible. Int. J. Mol. Sci., 22.10.3390/ijms22115409 ↗
69. Regeneration of critical-sized mandibular defect using a 3D-printed hydroxyapatite-based scaffold: An exploratory study10.1002/JPER.20-0110 ↗
70. Animal models for implant biomaterial research in bone: A review10.22203/eCM.v013a01 ↗
71. Critical Size Defects for Bone Regeneration Experiments in the Dog Mandible: A Systematic Review10.1097/ID.0000000000000713 ↗
72. Healing of alveolar bone in resorbable and non-resorbable membrane-protected defects. A histologic pilot study in dogs10.1016/S0142-9612(02)00145-X ↗
73. Critical size defect in the canine mandible10.1016/j.tripleo.2004.12.015 ↗