journal article·2025-04-14Open access

Evaluation of the Characteristics of Digital Light Processing 3D-Printed Magnesium Calcium Phosphate for Bone Regeneration

Peng Zhang, Meiling Zhang, Yoo-Na Jung, Seong-Won Choi, Yong-Seok Lee, Geelsu Hwang, Kwi-Dug Yun

Abstract

Recent advancements in three-dimensional (3D) printing technology, particularly digital light processing (DLP) 3D printing, have enabled the customization of bone substitutes with specific shapes that match bone defect sizes and geometries. Magnesium calcium phosphate (MCP) has gained considerable attention due to its strong mechanical properties, degradability, and ability to promote bone regeneration. In this study, we prepared MCP samples with five different molar ratios via DLP 3D printing. We analyzed the physicochemical properties of these five groups, including phase compositions and microstructures, which were examined using X-ray diffraction and scanning electron microscopy, respectively. Additionally, we assessed the effects of MCP on material density and shrinkage. Biaxial flexural strength and degradation rate were evaluated; biological properties were examined through WST-8 analysis and alkaline phosphatase activity assays. Among the tested samples, MCP1/1 exhibited the highest strength. A higher proportion of magnesium phosphate in MCP corresponded to an increased degradation rate. Cell response observations in the WST-8 assay indicated that cell proliferation was better in the MCP1/1 group than in the other groups on days 4 and 7 of culturing. Alkaline phosphatase activity assays demonstrated that MCP1/1 exhibited higher activity than calcium phosphate. Our findings suggest that MCP1/1 can be used effectively in bone-tissue-engineering applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prosthodontics, School of Dentistry, Chonnam National University, Gwangju 61186, Republic of Korea

Department of Orthodontics, School of Dentistry, Chonnam National University, Gwangju 61186, Republic of Korea

Industry Support Center for Convergence Medical Devices, Chonnam National University Hospital, Gwangju 61469, Republic of Korea

Department of Mechanical Engineering, Myongji University, Yongin 17058, Republic of Korea

Department of Preventive and Restorative Sciences, School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA

Center for Innovation & Precision Dentistry, School of Dental Medicine, School of Engineering and Applied Sciences, University of Pennsylvania, Philadelphia, PA 19104, USA

Funding

National Research Foundation of Korea (NRF), funded by the Ministry of Trade, Industry, and Energy (MOTIE)

References (47)

Show source-provided references
1. Smith, B.T., Shum, J., Wong, M., Mikos, A.G., and Young, S. (2015). Bone Tissue Engineering Challenges in Oral & Maxillofacial Surgery, Engineering Mineralized and Load Bearing Tissues, Springer.10.1007/978-3-319-22345-2_4 ↗
2. Current state of fabrication technologies and materials for bone tissue engineering10.1016/j.actbio.2018.09.031 ↗
3. He, J., Li, K., Wu, T., Chen, J., Li, S., and Zhang, X. (2023). Research progress in degradable metal-based multifunctional scaffolds for bone tissue engineering. Med. Comm. Biomater. Appl., 2.10.1002/mba2.60 ↗
4. Polymer/metal nanocomposites for biomedical applications10.1016/j.msec.2015.11.023 ↗
5. Current advances in bone tissue engineering concerning ceramic and bioglass scaffolds: A review10.1016/j.ceramint.2019.07.096 ↗
6. Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications10.1016/j.ijbiomac.2022.07.140 ↗
7. Self-setting bioactive calcium–magnesium phosphate cement with high strength and degradability for bone regeneration10.1016/j.actbio.2008.06.020 ↗
8. Degradation of 3D-printed magnesium phosphate ceramics in vitro and a prognosis on their bone regeneration potential
9. In vivo degradation of low temperature calcium and magnesium phosphate ceramics in a heterotopic model10.1016/j.actbio.2011.05.022 ↗
10. Gelli, R., and Ridi, F. (2023). An Overview of Magnesium-Phosphate-Based Cements as Bone Repair Materials. J. Funct. Biomater., 14.10.3390/jfb14080424 ↗
11. Ion incorporation into bone grafting materials10.1111/prd.12533 ↗
12. Photo-curing 3D printing technique and its challenges
13. Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology10.1016/j.ceramint.2020.01.152 ↗
14. In situ magnesium phosphate/polycaprolactone 3D-printed scaffold induce bone regeneration in rabbit maxillofacial bone defect model10.1016/j.matdes.2022.110477 ↗
15. Schaufler, C., Schmitt, A.-M., Moseke, C., Stahlhut, P., Geroneit, I., Brückner, M., Meyer-Lindenberg, A., and Vorndran, E. (2022). Physicochemical degradation of calcium magnesium phosphate (stanfieldite) based bone replacement materials and the effect on their cytocompatibility. Biomed. Mater., 18.10.1088/1748-605X/aca735 ↗
16. 3D printing of ceramics: A review10.1016/j.jeurceramsoc.2018.11.013 ↗
17. Digital light processing (DLP) of nano biphasic calcium phosphate bioceramic for making bone tissue engineering scaffolds10.1016/j.ceramint.2022.06.067 ↗
18. Zhang, J., Hu, Q., Wang, S., Tao, J., and Gou, M. (2019). Digital light processing based three-dimensional printing for medical applications. Int. J. Bioprinting, 6.10.18063/ijb.v6i1.242 ↗
19. Coppola, B., Montanaro, L., and Palmero, P. (2022). DLP Fabrication of Zirconia Scaffolds Coated with HA/β-TCP Layer: Role of Scaffold Architecture on Mechanical and Biological Properties. J. Funct. Biomater., 13.10.3390/jfb13030148 ↗
20. Photopolymerization in 3D printing10.1021/acsapm.8b00165 ↗
21. Effects of dispersant concentration on the properties of hydroxyapatite slurry and scaffold fabricated by digital light processing10.1016/j.jmapro.2023.12.040 ↗
22. (1997). Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays (Standard No. ASTM C326-09(2018)).
23. Additive manufacturing of ceramic alumina/calcium phosphate structures by DLP 3D printing10.1016/j.matchemphys.2021.125417 ↗
24. Preparation, chemistry and physical properties of bone-derived hydroxyapatite particles having a negative zeta potential10.1016/j.matchemphys.2011.11.051 ↗
25. Jun, M.-J., Kang, J.-H., Sakthiabirami, K., Toopghara, S.A.H., Kim, Y.-S., Yun, K.-D., and Park, S.-W. (2023). The Impact of Particle Size and Surface Treatment of Zirconia Suspension for Photocuring Additive Manufacturing. Materials, 16.10.3390/ma16041670 ↗
26. A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique10.1016/j.ijhydene.2019.01.071 ↗
27. Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering10.1016/j.ceramint.2014.06.117 ↗
28. The effects of sintering temperature on the properties of hydroxyapatite10.1016/S0272-8842(99)00046-2 ↗
29. Production of alumina parts by powder injection molding with a binder system based on high density polyethylene10.1016/j.jeurceramsoc.2007.08.004 ↗
30. Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method10.1016/j.ceramint.2017.11.135 ↗
31. A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
32. Sim, J.-H., Koo, B.-K., Jung, M., and Kim, D.-S. (2022). Study on Debinding and Sintering Processes for Ceramics Fabricated Using Digital Light Processing (DLP) 3D Printing. Processes, 10.10.3390/pr10112467 ↗
33. Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches10.1016/j.jeurceramsoc.2019.01.044 ↗
34. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography10.1016/j.jeurceramsoc.2018.10.024 ↗
35. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing10.1016/j.ceramint.2018.09.152 ↗
36. Roles of solid loading in stereolithography additive manufacturing of ZrO2 ceramic10.1016/j.ijrmhm.2021.105604 ↗
37. Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions10.1016/j.jeurceramsoc.2016.12.013 ↗
38. Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology10.1016/j.jeurceramsoc.2019.05.023 ↗
39. Photopolymerization of powder suspensions for shaping ceramics10.1016/j.jeurceramsoc.2010.12.003 ↗
40. Jacobs, P.F. (1992). Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography, Society of Manufacturing Engineers.
41. Ge, M., Xie, D., Yang, Y., and Tian, Z. (2023). Sintering densification mechanism and mechanical properties of the 3D-printed high-melting-point-difference magnesium oxide/calcium phosphate composite bio-ceramic scaffold. J. Mech. Behav. Biomed. Mater., 144.10.1016/j.jmbbm.2023.105978 ↗
42. Human osteoblasts adhesion and proliferation on magnesium-substituted tricalcium phosphate dense tablets10.1007/s10856-008-3610-3 ↗
43. Mechanisms of bone development and repair10.1038/s41580-020-00279-w ↗
44. Patergnani, S., Danese, A., Bouhamida, E., Aguiari, G., Previati, M., Pinton, P., and Giorgi, C. (2020). Various Aspects of Calcium Signaling in the Regulation of Apoptosis, Autophagy, Cell Proliferation, and Cancer. Int. J. Mol. Sci., 21.10.3390/ijms21218323 ↗
45. Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation10.1016/j.actbio.2014.02.002 ↗
46. Salamanca, E., Pan, Y.-H., Sun, Y.-S., Hsueh, H.-W., Dorj, O., Yao, W.-L., Lin, J.C.-Y., Teng, N.-C., Watanabe, I., and Abe, S. (2022). Magnesium Modified β-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo. Int. J. Mol. Sci., 23.10.3390/ijms23031717 ↗
47. Development of magnesium calcium phosphate biocement for bone regeneration10.1098/rsif.2009.0559 ↗