journal article·2025-04-11Open access

Thermal Dynamics of Laser-Irradiated Trilayer Bonded-Zirconia Structures

Mitchell Tharp, Jaccare Jauregui-Ulloa, Grace Mendonça De Souza, Susana Salazar Marocho

Abstract

This study aims to assess the thermal dynamics of supporting structures during laser-assisted debonding of bonded yttrium-stabilized zirconia (YSZ) ceramic. We tested the hypothesis that the heat transfer to dentin analog material and composite resin resembles that of dentin. Thirty sintered YSZ (ZirCAD, Ivoclar, Schann, Liechtenstein) slabs (4 mm diameter, 1 mm thickness) were air particle abraded, followed by two coats of Monobond Plus (Ivoclar). The slabs were bonded to exposed occlusal dentin, NEMA G10 dentin analog, or composite resin cylinders using Multilink Automix (Ivoclar) dual-cured cement. The bonded YSZ specimens (n = 10/group) subjected to irradiation with an Er,Cr:YSGG laser (Waterlase MD, Biolase, Foothill Ranch, CA, USA) at 7.5 W, 25 Hz, with 50% water and air for 15 s. Heat transfer during laser irradiation was monitored with an infrared camera (Optris PI 640, Optris GmbH, Berlin, Germany) at 0.1-s intervals. Data were analyzed using one-way ANOVA, which showed no significant differences in mean temperature between zirconia and cement layers across the substrates (composite resin, G10, dentin) (p = 0.0794). These results suggest flexibility in substrate choice for future thermal dynamics studies under laser irradiation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Laser Applications in Dentistry and Medicine · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomedical Materials Science Department, School of Dentistry, University of Mississippi Medical Center, Jackson, MS 39216, USA

Restorative Dentistry Department, School of Dental Medicine, University at Buffalo, Buffalo, NY 14214, USA

References (34)

Show source-provided references
1. Ceramics overview10.1038/s41415-022-4242-6 ↗
2. From porcelain-fused-to-metal to zirconia: Clinical and experimental considerations10.1016/j.dental.2010.10.024 ↗
3. Removal of Modern Ceramics
4. Review of techniques for the intact removal of a permanently cemented restoration
5. An effective removal system for Zirconia and Lithium-disilicate restorations
6. Zirconia restorations: An American Dental Association Clinical Evaluators Panel survey10.1016/j.adaj.2020.10.012 ↗
7. The National Dental Practice-Based Research Network (2025, March 01). Quick Poll on Removal of All-Ceramic Restorations. Available online: https://www.nationaldentalpbrn.org/wp-content/uploads/2021/02/All-Ceramic-QP-Narrative-V1.0.pdf.
8. Bonding and Debonding of Zirconia Using Laser Approaches10.11607/ijp.7991 ↗
9. Laser all-ceramic crown removal—A laboratory proof-of-principle study—Phase 1 material characteristics10.1002/lsm.22279 ↗
10. Deeb, J.G., Grzech-Lesniak, K., and Bencharit, S. (2023). Evaluation of the effectiveness and practicality of erbium lasers for ceramic restoration removal: A retrospective clinical analysis. PLoS ONE, 18.10.1371/journal.pone.0295957 ↗
11. Deeb, J.G., Bencharit, S., Dalal, N., Abdulmajeed, A., and Grzech-Les’niak, K. (2019). Using Er:YAG laser to remove lithium disilicate crowns from zirconia implant abutments: An in vitro study. PLoS ONE, 14.10.1371/journal.pone.0223924 ↗
12. In vitro examination of the use of Er:YAG laser to retrieve lithium disilicate crowns from titanium implant abutments10.1111/jopr.13077 ↗
13. Effects of different application durations of scanning laser method on debonding strength of laminate veneers10.1007/s10103-011-0959-1 ↗
14. Er:YAG laser debonding of porcelain veneers10.1002/lsm.21144 ↗
15. Evaluation of rebonding strengths of leucite and lithium disilicate veneers debonded with an Er:YAG laser10.1007/s10103-019-02872-8 ↗
16. Er, Cr: YSGG laser in the debonding of feldspathic porcelain veneers: An in vitro study of two different fluences
17. Debonding time and dental pulp temperature with the Er,Cr:YSGG laser for debonding feldespathic and lithium disilicate veneers10.15171/jlms.2019.34 ↗
18. Elkharashi, A., Grzech-Les’niak, K., Deeb, J.G., Abdulmajeed, A.A., and Bencharit, S. (2020). Exploring the use of pulsed erbium lasers to retrieve a zirconia crown from a zirconia implant abutment. PLoS ONE, 15.10.1371/journal.pone.0233536 ↗
19. Evaluation of Er:YAG and Er,Cr:YSGG laser irradiation for the debonding of prefabricated zirconia crowns10.17219/acem/127686 ↗
20. Evaluation of Er,Cr:YSGG laser irradiation for debonding of zirconia hybrid abutment crowns from titanium bases10.1007/s10103-022-03539-7 ↗
21. Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics10.1016/j.jmbbm.2015.08.031 ↗
22. Effect of cooling water temperature on the temperature changes in pulp chamber and at handpiece head during high-speed tooth preparation
23. Dentin: Microstructure and characterization
24. Chun, K., Choi, H., and Lee, J. (2014). Comparison of mechanical property and role between enamel and dentin in the human teeth. J. Dent. Biomech., 5.10.1177/1758736014520809 ↗
25. Resin composite—state of the art10.1016/j.dental.2010.10.020 ↗
26. Microhardness Evaluation of Microhybrid Versus Nanofilled Resin Composite After Exposure to Acidic Drinks10.4103/jispcd.JISPCD_66_22 ↗
27. Khan, A.A., Abdullah Alkhureif, A., Bautista, L.S., Alsunbul, H., and Vellappally, S. (2023). Peroxide-Free Bleaching Gel: Effect on the Surface and Mechanical Properties of Nano-and Micro-Hybrid Restorative Composite Materials. Appl. Sci., 13.10.3390/app13105935 ↗
28. Development of a clinically validated bulk failure test for ceramic crowns10.1016/S0022-3913(10)60129-1 ↗
29. Effect of occlusal contact size on interfacial stresses and failure of a bonded ceramic: FEA and monotonic loading analyses10.1016/j.dental.2007.06.017 ↗
30. Laser-assisted removal of all ceramic fixed dental prostheses: A comprehensive review10.1111/jerd.12360 ↗
31. Laser all-ceramic crown removal and pulpal temperature—A laboratory proof-of-principle study10.1007/s10103-015-1738-1 ↗
32. Thermal expansion characteristics of light-cured dental resins and resin composites10.1016/j.biomaterials.2003.09.078 ↗
33. Measurement of thermal expansion coefficient of human teeth10.1111/j.1834-7819.1989.tb04660.x ↗
34. Comparison of light propagation in dental tissues and nano-filled resin-based composite10.1007/s00784-018-2451-9 ↗