Show source-provided references
2. A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential
10.1016/j.matpr.2021.11.059 ↗5. Marginal and internal fit and intaglio surface trueness of temporary crowns fabricated with stereolithography, digital light processing, and milling technology
10.11607/ijp.7764 ↗6. Restoration of the inferomedial orbital strut using a standardized three-dimensional printing implant
10.1111/joa.13136 ↗7. Son, K., Lee, J.H., and Lee, K.B. (2021). Comparison of intaglio surface trueness of interim dental crowns fabricated with SLA 3D printing, DLP 3D printing, and milling technologies. Healthcare, 9.
10.3390/healthcare9080983 ↗8. Choi, J.W., Ahn, J.J., Son, K., and Huh, J.B. (2019). Three-dimensional evaluation on accuracy of conventional and milled gypsum models and 3D printed photopolymer models. Materials, 12.
10.3390/ma12213499 ↗10. Balestra, D., Lowther, M., Goracci, C., Mandurino, M., Cortili, S., Paolone, G., and Vichi, A. (2024). 3D printed materials for permanent restorations in indirect restorative and prosthetic dentistry: A critical review of the literature. Materials, 17.
10.3390/ma17061380 ↗11. Liu, X., Cameron, A.B., Haugli, K.H., Mougios, A.A., Heng, N.C., and Choi, J.J.E. (2024). Influence of CAD/CAM diamond bur wear on the accuracy and surface roughness of dental ceramic restorations: A systematic review. J. Mech. Behav. Biomed. Mater., 161.
10.1016/j.jmbbm.2024.106813 ↗13. Enhanced biological and mechanical properties of well-dispersed nanophase ceramics in polymer composites: From 2D to 3D printed structures
10.1016/j.msec.2010.07.013 ↗16. Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics
10.1016/j.matchar.2020.110548 ↗17. Sim, J.H., Koo, B.K., Jung, M., and Kim, D.S. (2022). Study on debinding and sintering processes for ceramics fabricated using digital light processing (DLP) 3D printing. Processes, 10.
10.3390/pr10112467 ↗19. Caussin, E., Moussally, C., Le Goff, S., Fasham, T., Troizier-Cheyne, M., Tapie, L., and François, P. (2024). Vat photopolymerization 3D printing in dentistry: A comprehensive review of actual popular technologies. Materials, 17.
10.3390/ma17040950 ↗20. Recent advances in the stereolithographic three-dimensional printing of ceramic cores: Challenges and prospects
10.1016/j.jmst.2021.10.041 ↗21. Digital light processing 3D printing of ceramic materials: A review on basic concept, challenges, and applications
10.1007/s00170-023-12847-3 ↗24. Pixel-level grayscale manipulation to improve accuracy in digital light processing 3D printing
10.1002/adfm.202213252 ↗26. Huang, J., Cai, J., Huangfu, C., Li, S., Chen, G., Yun, H., and Xiao, J. (2024). A scalable digital light processing 3D printing method. Micromachines, 15.
10.3390/mi15111298 ↗27. Su, G., Zhang, Y., Jin, C., Zhang, Q., Lu, J., Liu, Z., and Ma, J. (2023). 3D printed zirconia used as dental materials: A critical review. J. Biol. Eng., 17.
10.1186/s13036-023-00396-y ↗29. 3D-printed versus conventionally milled zirconia for dental clinical applications: Trueness, precision, accuracy, biological and esthetic aspects
10.1016/j.jdent.2024.104925 ↗33. Abualsaud, R., and Alalawi, H. (2022). Fit, precision, and trueness of 3D-printed zirconia crowns compared to milled counterparts. Dent. J., 10.
10.3390/dj10110215 ↗34. Fit analysis of stereolithography-manufactured three-unit resin prosthesis with different 3D-printing build orientations and layer thicknesses
10.1016/j.prosdent.2021.11.031 ↗35. Refaie, A., Fouda, A., Bourauel, C., and Singer, L. (2023). Marginal gap and internal fit of 3D-printed versus milled monolithic zirconia crowns. BMC Oral Health, 23.
10.1186/s12903-023-03184-8 ↗36. Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns
10.1067/mpr.2002.122011 ↗37. 3D quantification of clinical marginal and internal gap of porcelain laminate veneers with minimal and without tooth preparation and 2-year clinical evaluation
39. Accuracy and reliability of methods to measure marginal adaptation of crowns and FDPs: A literature review
10.1111/jopr.12006 ↗41. Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology
10.1016/j.jdent.2014.12.007 ↗43. Alammar, A., Att, W., and Beuer, F. (2024). The Accuracy of 3D-Printed Fixed Dental Restorations. J. Esthet. Restor. Dent.
10.1111/jerd.13365 ↗44. In vitro evaluation of bond strength and failure behavior between 3D-printed cobalt-chromium alloy and different types of denture base resins
10.1016/j.jdent.2024.105119 ↗49. Lee, K., Son, K., and Lee, K.B. (2020). Effects of trueness and surface microhardness on the fitness of ceramic crowns. Appl. Sci., 10.
10.3390/app10051858 ↗