journal article·2025-02-20Open access

Hydroxyapatite Dental Inserts for Tooth Restoration: Stress and Displacement Analysis

Maja Lezaja Zebic, Aleksandar Bodic, Djordje Veljovic, Tamara Matic, Jelena Carkic, Vladimir Milovanovic

Abstract

Hydroxyapatite (HAP) inserts minimize restoration contraction by constituting a major part of the restoration; however, their effect on the relaxation of tooth tissues has not been previously tested. Finite element analysis was employed to estimate stress and displacement when HAP inserts with a thickness of 1.7 mm or 4.7 mm and a diameter of 4.7 mm were used to substitute for dentin. The volumetric contraction of the composite during polymerization, simulated through steady-state heat transfer analysis, yielded a contraction rate of 3.7%. Descriptive statistics revealed that the incorporation of HAP inserts reduced the displacement of dentin, enamel, and restoration caused by contraction by 44.4% to 66.7%, while maximal stress was reduced by 8.1% to 52%. Subsequent loading on the occlusal tooth surface showed that displacement values decreased by 12.1% to 33.3%, while maximum von Mises stress in enamel decreased by 32.8% to 40.6% with the use of HAP inserts. Although the maximum stress values in dentin were not significantly decreased (3% to 8.8%), the stress located at the bottom of the cavity was notably reduced, particularly in deep cavities at root canal entrances. The use of HAP inserts in restorative dentistry provides benefits for the preservation of prepared teeth, especially in preventing irreparable vertical root fractures of endodontically treated teeth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Dental Medicine, University of Belgrade, Nebojsina 35, 11000 Belgrade, Serbia

Faculty of Engineering, University of Kragujevac, Sestre Janjić, 34000 Kragujevac, Serbia

Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia

Funding

the School of Dental Medicine, University of Belgrade · the Faculty of Technology and Metallurgy · Science Fund of the Republic of Serbia

References (49)

Show source-provided references
1. Fatigue of biomaterials: A review10.1016/S0142-1123(00)00052-9 ↗
2. A review of dental composites: Challenges, chemistry aspects, filler influences, and future insights10.1016/j.compositesb.2021.108852 ↗
3. Alhussein, A., Alsahafi, R., Wang, X., Mitwalli, H., Filemban, H., Hack, G.D., Oates, T.W., Sun, J., Weir, M.D., and Xu, H.H. (2023). Novel Dental Low-Shrinkage-Stress Composite with Antibacterial Dimethylaminododecyl Methacrylate Monomer. J. Funct. Biomater., 14.10.3390/jfb14070335 ↗
4. Photopolymerization shrinkage-stress reduction in polymer-based dental restoratives by surface modification of fillers10.1016/j.dental.2021.01.013 ↗
5. Beta quartz microcrystalline glass as megafillers for composites
6. Polymerization shrinkage and contraction force of composite resin restorative inserted with “Megafiller”10.4012/dmj.12.182 ↗
7. Inserts—Megafillers in composite restorations: A literature review10.1007/s007840050105 ↗
8. Ceramic inserts do not generally improve resin composite margins10.1111/j.1365-2842.2005.01459.x ↗
9. Marginal leakage in class II-restorations after use of ceramic-inserts luted with different materials10.1046/j.1365-2842.1998.00281.x ↗
10. Dental applications of calcium orthophosphates (CaPO4)
11. Bond strength of restorative materials to hydroxyapatite inserts and dimensional changes of insert-containing restorations during polymerization10.1016/j.dental.2014.11.017 ↗
12. Composite nanostructured hydroxyapatite/yttrium stabilized zirconia dental inserts—The processing and application as dentin substitutes10.1016/j.ceramint.2018.07.028 ↗
13. Matic, T., Zebic, M.L., Miletic, V., Trajkovic, I., Milosevic, M., Racic, A., and Veljovic, D. (2024). Hydroxyapatite-based dental inserts: Microstructure, mechanical properties, bonding efficiency and fracture resistance of molars with occlusal restorations. J. Biomed. Mater. Res.—Part B Appl. Biomater., 112.10.1002/jbm.b.35331 ↗
14. Applications of finite element analysis in dentistry: A review10.4103/JIOH.JIOH_11_21 ↗
15. Bandela, V., and Kanaparthi, S. (2020). Finite element analysis and its applications in dentistry. Finite Element Methods and Their Applications, IntechOpen Limited.10.5772/intechopen.94064 ↗
16. Alemayehu, D.B., and Jeng, Y.R. (2021). Three-Dimensional Finite Element Investigation into Effects of Implant Thread Design and Loading Rate on Stress Distribution in Dental Implants and Anisotropic Bone. Materials, 14.10.20944/preprints202109.0221.v1 ↗
17. The effect of different occlusal contact situations on peri-implant bone stress—A contact finite element analysis of indirect axial loading10.1016/j.msec.2019.01.104 ↗
18. Pirmoradian, M., Naeeni, H.A., Firouzbakht, M., Toghraie, D., Khabaz, M.K., and Darabi, R. (2020). Finite element analysis and experimental evaluation on stress distribution and sensitivity of dental implants to assess optimum length and thread pitch. Comput. Methods Programs Biomed., 187.10.1016/j.cmpb.2019.105258 ↗
19. Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study10.1016/j.jcms.2015.03.025 ↗
20. Mandibular 3-dimensional finite element analysis for a patient with an aggressive form of craniofacial fibrous dysplasia10.1016/j.oooo.2019.06.009 ↗
21. Revolution in Orthodontics: Finite element analysis10.4103/2231-0762.178743 ↗
22. Influence of Different Restoring Materials on Stress Distribution in Prosthesis on Implants: A Review of Finite Element Studies10.1055/s-0042-1747955 ↗
23. Efficacy of the finite element analysis in assessing the effects of light curing on the mechanical properties of direct restorative composites: A systematic review
24. Marginal adaptation of Class II composite fillings: Guided polymerization vs reduced light intensity
25. Current concepts on adhesion to dentin10.1177/10454411970080030501 ↗
26. McCabe, J.F., and Walls, A.W. (2013). Applied Dental Materials, John Wiley & Sons.
27. Thermal expansion of hydroxyapatite between −100 °C and 50 °C10.1016/j.msec.2008.12.001 ↗
28. Openmandible: An open-source framework for highly realistic numerical modelling of lower mandible physiology10.1016/j.dental.2021.01.009 ↗
29. Influence of dental restorations and mastication loadings on dentine fatigue behaviour: Image-based modelling approach10.1016/j.jdent.2015.02.011 ↗
30. He, J., Zheng, Z., Wu, M., Zheng, C., Zeng, Y., and Yan, W. (2021). Influence of restorative material and cement on the stress distribution of endocrowns: 3D finite element analysis. BMC Oral Health, 21.10.1186/s12903-021-01865-w ↗
31. Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite10.1016/j.ceramint.2008.11.028 ↗
32. Architecture and design of a robotic mastication simulator for interactive load testing of dental implants and the mandible10.1016/j.prosdent.2019.06.023 ↗
33. Load capacity and fracture modes of instrumented tooth roots under axial compression10.1016/j.dental.2023.08.177 ↗
34. Occlusal stress distribution and remaining crack propagation of a cracked tooth treated with different materials and designs: 3D finite element analysis10.1016/j.dental.2021.01.020 ↗
35. Higher maximal occlusal bite force in endodontically treated teeth versus vital contralateral counterparts10.1016/j.joen.2016.12.028 ↗
36. Effects of different ceramic and composite materials on stress distribution in inlay and onlay cavities: 3-D finite element analysis10.4012/dmj.28.661 ↗
37. Neto, M.A., Roseiro, L., Messias, A., Falacho, R.I., Palma, P.J., and Amaro, A.M. (2021). Influence of cavity geometry on the fracture strength of dental restorations: Finite element study. Appl. Sci., 11.10.3390/app11094218 ↗
38. Ouldyerou, A., and Mehboob, H. (2023). Biomechanical performance of resin composite on dental tissue restoration: A finite element analysis. PLoS ONE, 18.10.1371/journal.pone.0295582 ↗
39. Influence of microstructure and chemistry on the fracture toughness of dental ceramics10.1016/S0109-5641(03)00002-2 ↗
40. Microwave sintering of fine grained HAP and HAP/TCP bioceramics10.1016/j.ceramint.2009.09.038 ↗
41. Mechanical weakening of devitalized teeth: Three-dimensional Finite Element Analysis and prediction of tooth fracture10.1111/iej.12381 ↗
42. Biomechanics of fractures in endodontically treated teeth10.1111/etp.12089 ↗
43. A six year evaluation of cracked teeth diagnosed with reversible pulpitis: Treatment and prognosis10.1016/j.joen.2007.08.015 ↗
44. Ninkovic, N., Opacic Galic, V., Milosevic, M., Trajkovic, I., Kuzmanovic Pficer, J., Bajuk-Bogdanović, D., Milovanovic, P., Yashin El-Bacha, D., Djuric, M., and Miletic, V. (2024). Effects of minimally invasive endodontic access cavity in molar teeth on polymerization, porosity and fracture resistance. Sci. Rep., 14.10.1038/s41598-024-72643-1 ↗
45. How can stress be controlled in endodontically treated teeth? A 3D finite element analysis10.1155/2013/426134 ↗
46. Zhou, Y., Hu, Z., Hu, Y., Gao, A., Pan, X., Tang, R., and Lin, Z. (2023). Patterns of stress distribution of endodontically treated molar under different types of loading using finite element models—The exploring of mechanism of vertical root fracture. J. Mech. Behav. Biomed. Mater., 144.10.1016/j.jmbbm.2023.105947 ↗
47. Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling10.1016/j.dental.2017.03.014 ↗
48. Biomechanical behavior of endocrown restorations with different CAD-CAM materials: A 3D finite element and in vitro analysis10.1016/j.prosdent.2020.03.009 ↗
49. Statistical methods in finite element analysis10.1016/S0021-9290(02)00085-4 ↗