Physico-Mechanical Properties and Bonding Performance of Graphene-Added Orthodontic Adhesives
Source abstract
Abstract
This study aimed to assess the key physico-mechanical properties and bonding performance of orthodontic adhesives with graphene addition for bonding a fixed retainer. Transbond LR (3M) and Transbond LV (3M) with no graphene were set as the control groups. Graphene was added into LR and LV at concentrations of 0.01 wt%, 0.05 wt% and 0.1 wt%. The stickiness of the uncured samples (n = 5) and real-time degree of conversion (DC) of the samples (n = 3) were measured over a 24-h period using Fourier-transform infrared spectroscopy. The hardness and other mechanical parameters, including the Martens hardness (HM), indentation modulus (EIT), elastic index (ηIT) and creep (CIT), were measured (n = 5). To measure the shear bond strength (SBS), adhesive composites were applied using a mold to bond the retainer wire to the lingual surfaces of bovine incisors (n = 10). Fracture modes subsequent to the SBS test were examined under light microscopy. Statistical analysis was conducted using ANOVA and Tukey tests (α = 0.05). In the LR groups, the LR + 0.01 showed the highest SBS (12.6 ± 2.0 MPa) and HM (539.4 ± 17.9 N/mm2), while the LV + 0.05 (7.7 ± 1.1 MPa) had the highest SBS and the LV + 0.1 had the highest HM (312.4 ± 17.8 N/mm2) among the LV groups. The most frequent failure mode observed was adhesive fracture followed by mixed fracture. No statistical difference was found between the graphene-added groups and the control groups in terms of the EIT, ηIT and CIT, except that the CIT was significantly lower in the LR + 0.01 than in the control group. Graphene addition had no significant adverse effect on the stickiness and DC of both LR and LV.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanotechnology research and applications · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Dentistry, University of Manchester, Manchester M13 9PL, UK
Centre for Advanced 2D Materials and Graphene Research Centre, National University of Singapore, Singapore 119085, Singapore
Faculty of Dentistry, National University of Singapore, 11 Lower Kent Ridge Road, Singapore 119085, Singapore
Oral Care Health Innovations and Design Singapore (ORCHIDS), National University of Singapore, 11 Lower Kent Ridge Road, Singapore 119085, Singapore
References (73)
Show source-provided references
1. Long-term experience with direct-bonded retainers: Update and clinical advice
2. Fixed Orthodontic Retainers: A Review10.5152/TurkJOrthod.2019.18080 ↗
3. Fixed retention: Pitfalls and complications10.1038/s41415-021-2892-4 ↗
4. Long-term follow-up of maxillary fixed retention: Survival rate and periodontal health10.1093/ejo/cju001 ↗
5. What causes failure of fixed orthodontic retention?—Systematic review and meta-analysis of clinical studies10.1186/s13005-021-00281-3 ↗
6. Flowable composites for bonding lingual retainers
7. Lingual retainer materials: Comparative evaluation of wear resistance of flowable nanocomposites and universal composite: An in vitro study10.4103/1735-3327.324028 ↗
8. Are the flowable composites suitable for orthodontic bracket bonding?
9. Flowable composites for bonding orthodontic retainers10.2319/033007-155.1 ↗
10. Relative wear of flowable and highly filled composite10.1016/j.prosdent.2004.11.006 ↗
11. Titanium dioxide nanoparticles reinforced experimental resin composite for orthodontic bonding10.1088/2053-1591/ab5a93 ↗
12. Bond strength of indirect bonded brackets in orthodontic adhesives with different viscosities10.4012/dmj.2020-113 ↗
13. Scribante, A., Gallo, S., Turcato, B., Trovati, F., Gandini, P., and Sfondrini, M.F. (2020). Fear of the Relapse: Effect of Composite Type on Adhesion Efficacy of Upper and Lower Orthodontic Fixed Retainers: In Vitro Investigation and Randomized Clinical Trial. Polymers, 12.10.3390/polym12040963 ↗
14. A review of dental composites: Challenges, chemistry aspects, filler influences, and future insights10.1016/j.compositesb.2021.108852 ↗
15. Graphene and its derivatives: Opportunities and challenges in dentistry10.1016/j.msec.2019.04.051 ↗
16. Rokaya, D., Srimaneepong, V., Thunyakitpisal, P., Qin, J., Rosa, V., and Sapkota, J. (2021). Potential applications of graphene-based nanomaterials in biomedical, dental, and implant applications. Advances in Dental Implantology Using Nanomaterials and Allied Technology Applications, Springer.10.1007/978-3-030-52207-0_4 ↗
17. Recent Progress in Graphene/Polymer Nanocomposites10.1002/adma.202001105 ↗
18. Graphene-Induced Oriented Interfacial Microstructures in Single Fiber Polymer Composites10.1021/acsami.5b03269 ↗
19. Measurement of carbon nanotube–polymer interfacial strength10.1063/1.1579568 ↗
20. Polymer/carbon nanotube nano composite fibers—A review10.1021/am405136s ↗
21. Recent Advances in Fabrication and Characterization of Graphene-Polymer Nanocomposites10.4236/graphene.2012.12005 ↗
22. Approaching the theoretical limit for reinforcing polymers with graphene
23. Poly(vinyl alcohol)/graphene oxide nanocomposites prepared by a simple eco-process10.1038/pj.2012.58 ↗
24. Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content10.1021/nn9010472 ↗
25. Graphene Nanocoating: High Quality and Stability upon Several Stressors10.1177/00220345211024526 ↗
26. Properties and Stability of Hazelnut Oil Organogels with Beeswax and Monoglyceride10.1007/s11746-014-2434-1 ↗
27. Textural characteristics of pasta made from rice flour supplemented with proteins and hydrocolloids10.1111/j.1745-4603.2005.00024.x ↗
28. Ultrasound-assisted synthesis of highly stable MCT based oleogel and evaluation of its baking performance10.1016/j.afres.2022.100156 ↗
29. Conversion kinetics of rapid photo-polymerized resin composites10.1016/j.dental.2020.07.008 ↗
30. Examining exposure reciprocity in a resin based composite using high irradiance levels and real-time degree of conversion values10.1016/j.dental.2015.02.010 ↗
31. Review of Instrumented Indentation10.6028/jres.108.024 ↗
32. Effect and measurement of the machine compliance in the macro range of instrumented indentation test10.1016/j.measurement.2009.09.009 ↗
33. (2015). Metallic Materials: Instrumented Indentation Test for Hardness and Materials Parameters. Test Method (Standard No. ISO 14577-1:2015).
34. A method for assessing force/work parameters for stickiness of unset resin-composites10.1016/j.dental.2011.04.005 ↗
35. Stickiness prior to setting of some light cured resin-composites10.1016/S0109-5641(02)00097-0 ↗
36. Surface morphology and mechanical properties of new-generation flowable resin composites for dental restoration10.1016/j.dental.2011.08.596 ↗
37. Flow, strength, stiffness and radiopacity of flowable resin composites
38. Antibacterial, physical and mechanical properties of flowable resin composites containing zinc oxide nanoparticles10.1016/j.dental.2013.03.011 ↗
39. Improving mechanical properties of flowable dental composite resin by adding silica nanoparticles10.2298/VSP1305477B ↗
40. Addition of silver nanoparticles reduces the wettability of methacrylate and silorane-based composites10.1590/S1806-83242012000600004 ↗
41. Pre-heating effects on extrusion force, stickiness and packability of resin-based composite10.1016/j.dental.2019.08.101 ↗
42. Stickiness of dental resin composite materials to steel, dentin and bonded dentin10.1016/j.dental.2009.08.006 ↗
43. Degree of conversion of two lingual retainer adhesives cured with different light sources10.1093/ejo/cjh085 ↗
44. Optical effects of graphene addition on adhesives for orthodontic lingual retainers10.1111/eos.12966 ↗
45. The nanofiller effect on properties of experimental graphene dental nanocomposites10.1080/01694243.2016.1161969 ↗
46. Synergistic effect of graphene oxide/calcium phosphate nanofiller in a dentin adhesive on its dentin bond integrity and degree of conversion. A scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared, micro-Raman, and bond strength study10.1002/jemt.23764 ↗
47. Recent progress in graphene based polymer nanocomposites10.1080/23312009.2020.1833476 ↗
48. Formulation of nano-graphene doped with nano silver modified dentin bonding agents with enhanced interfacial stability and antibiofilm properties10.1016/j.dental.2021.12.016 ↗
49. Graphene composites with dental and biomedical applicability10.3762/bjnano.9.73 ↗
50. Effects of graphene addition on the mechanical properties of composites for dental restoration
51. Synthesis and mechanical characterization of epoxy hybrid composites containing graphene nanoplatelets10.1177/09544062221081286 ↗
52. Synthesis and performance of experimental resin-based dental adhesives reinforced with functionalized graphene and hydroxyapatite fillers10.1016/j.matdes.2022.110985 ↗
53. Mechanical and surface properties of a 3D-printed dental resin reinforced with graphene
54. Reduced Graphene Oxide-Zinc Oxide Flower-Like Composite for Glass-Ionomer Materials Reinforcement10.1590/1980-5373-mr-2019-0580 ↗
55. Nanoindentation creep versus bulk compressive creep of dental resin-composites10.1016/j.dental.2012.08.012 ↗
56. The effect of artificial aging on Martens hardness and indentation modulus of different dental CAD/CAM restorative materials10.1016/j.jmbbm.2018.06.028 ↗
57. Adhesion and cohesion of epoxy-based industrial composite coatings10.1016/j.compositesb.2020.108035 ↗
58. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
59. Graphene oxide-based experimental silane primers enhance shear bond strength between resin composite and zirconia10.1111/eos.12665 ↗
60. Enhanced resin zirconia adhesion with carbon nanotubes-infused silanes: A pilot study10.1080/00218464.2016.1242422 ↗
61. Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites10.1016/j.cplett.2012.02.006 ↗
62. Improved adhesive strength and toughness of polyvinyl acetate glue on addition of small quantities of graphene10.1021/am302864f ↗
63. Relationship between thin-film bond strength as measured by a scratch test, and indentation hardness for bonding agents10.1016/j.dental.2015.11.006 ↗
64. Effects of mechanical properties of adhesive resins on bond strength to dentin10.1016/S0109-5641(01)00046-X ↗
65. Reicheneder, C.A., Gedrange, T., Lange, A., Baumert, U., and Proff, P. (2009). Shear and tensile bond strength comparison of various contemporary orthodontic adhesive systems: An in-vitro study. Am. J. Orthod. Dentofac. Orthop., 135.10.1016/j.ajodo.2008.07.013 ↗
66. Bond strength of amorphous calcium phosphate–containing orthodontic composite used as a lingual retainer adhesive10.2319/112807-560.1 ↗
67. Shear bond strength of nanofilled flowable resins used for indirect bracket bonding
68. Effect of adhesive application on the shear bond strength of flowable composite resins and APC plus to orthodontic molar tubes10.1080/01694243.2012.727155 ↗
69. Factors affecting the shear bond strength of orthodontic brackets–a review of in vitro studies
70. An in vitro evaluation of the effects of nanoparticles on shear bond strength and antimicrobial properties of orthodontic adhesives: A systematic review and meta-analysis study10.1016/j.ortho.2020.01.011 ↗
71. Do we need a randomized controlled trial to assess trivial, albeit standard used, clinical steps in bonding? The answer is yes, but there are some interpretation issues10.1093/ejo/cju026 ↗
72. Bovine teeth can reliably substitute human dentine in an intra-tooth push-out bond strength model?10.1111/iej.13085 ↗
73. Adhesion and cohesion