journal article·2023-08-29Open access

In Vitro Resistance of Natural Molars vs. Additive-Manufactured Simulators Treated with Pulpotomy and Endocrown

Marie-Laure Munoz-Sanchez, Alexis Gravier, Olivier Francois, Emmanuel Nicolas, Martine Hennequin, Nicolas Decerle

Abstract

Endocrowns are designed to restore endodontically treated teeth with root canal treatment (Rct). Recently, endocrowns were proposed for teeth treated with full pulpotomy (FP). No data exist on in vitro evaluations for this combination. This study aimed to evaluate the mechanical behavior of pulpotomy-treated teeth with endocrowns according to different protocols for preparation design and materials and to assess whether 3D-printed resin simulators could be a reliable alternative for human teeth during in vitro strength tests. One hundred and ten extracted natural molars were randomized into 11 groups according to the type of endodontic treatment, the material used, and the design of peripheric preparation. One hundred and ten resin simulators were separated similarly. The samples were embedded in epoxy resin blocks before being subjected to oblique compressive load until failure. For natural teeth, the variance analysis separated two homogeneous groups, one regrouping the endodontically treated or pulpotomy-treated teeth without coronal restoration and the other one regrouping all the other samples, i.e., the untreated teeth (positive controls) and the treated and restored teeth. The strength resistance was lower for the resin simulators than for natural teeth in all groups. Within the limit of this study, strength resistance is not the most important criterion for choosing the type of material, preparation, or endodontic treatment for endocrowns. Resin simulators are not efficient for in vitro strength studies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Endodontics and Root Canal Treatments · Dental materials and restorations · Occupational health in dentistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre de Recherche en Odontologie Clinique (CROC), Université Clermont Auvergne, F-63000 Clermont-Ferrand, France

CHU Clermont-Ferrand, Service d’Odontologie, F-63003 Clermont-Ferrand, France

Institut Pascal UMR CNRS 6602, Université Clermont Auvergne, F-63000 Clermont-Ferrand, France

References (55)

Show source-provided references
1. Restorative Difficulty Evaluation System of Endodontically Treated Teeth10.1111/jerd.12880 ↗
2. Dotto, L., Girotto, L.P.S., Correa Silva Sousa, Y.T., Pereira, G.K.R., Bacchi, A., and Sarkis-Onofre, R. (2022). Factors Influencing the Clinical Performance of the Restoration of Endodontically Treated Teeth: An Assessment of Systematic Reviews of Clinical Studies. J. Prosthet. Dent.10.1016/j.prosdent.2022.03.030 ↗
3. Determination of the Moisture Content of Vital and Pulpless Teeth10.1016/0030-4220(72)90351-9 ↗
4. Moisture Content of Vital vs Endodontically Treated Teeth10.1111/j.1600-9657.1994.tb00067.x ↗
5. Influence of the Endodontic Treatment on Mechanical Properties of Root Dentin10.1016/j.joen.2007.01.016 ↗
6. Survival Rate of CAD-CAM Endocrowns Performed by Undergraduate Students10.2341/20-126-C ↗
7. No Post-No Core Approach to Restore Severely Damaged Posterior Teeth: An up to 10-Year Retrospective Study of Documented Endocrown Cases10.1016/j.jdent.2017.04.009 ↗
8. Chairside Computer-Aided Design/Computer-Aided Manufacture All-Ceramic Crown and Endocrown Restorations: A 7-Year Survival Rate Study10.11607/ijp.5132 ↗
9. Munoz-Sanchez, M.-L., Linas, N., Decerle, N., Nicolas, E., Hennequin, M., and Cousson, P.-Y. (2020). A Combination of Full Pulpotomy and Chairside CAD/CAM Endocrown to Treat Teeth with Deep Carious Lesions and Pulpitis in a Single Session: A Preliminary Study. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17176340 ↗
10. Fracture Resistance of Resin Based and Lithium Disilicate Endocrowns. Which Is Better?—A Systematic Review of in-Vitro Studies
11. Cluster Analysis of Tooth Size in Subjects with Normal Occlusion10.1016/j.ajodo.2005.12.037 ↗
12. Optimization and Preclinical Perception of an Artificial Simulator for Endodontic Training: A Preliminary Study10.1002/j.0022-0337.2017.81.3.tb06278.x ↗
13. A Critical Evaluation of the Material Properties and Clinical Suitability of In-house Printed and Commercial Tooth Replicas for Endodontic Training10.1111/iej.13361 ↗
14. 3D Printed Teeth for the Preclinical Education of Dental Students10.21815/JDE.019.103 ↗
15. Effect on Undergraduate Student Self-Confidence in Using 3D Printed Primary Molars for Root Canal Treatment Simulation Training10.1007/s40368-022-00764-0 ↗
16. Fracture Resistance and Failure Modes of Lithium Disilicate or Composite Endocrowns10.4103/njcp.njcp_175_17 ↗
17. American Academy of Pediatric Dentistry (2017). Pulp Therapy for Primary and Immature Permanent Teeth. Pediatr. Dent., 39, 325–333.
18. Assessment of Alternative Emergency Treatments for Symptomatic Irreversible Pulpitis: A Randomized Clinical Trial10.1111/iej.12851 ↗
19. Postendodontic Pain after Pulpotomy or Root Canal Treatment in Mature Teeth with Carious Pulp Exposure: A Multicenter Randomized Controlled Trial10.1155/2020/5853412 ↗
20. Outcomes of Different Vital Pulp Therapy Techniques on Symptomatic Permanent Teeth: A Case Series
21. Outcomes of Vital Pulp Therapy Using Mineral Trioxide Aggregate or Biodentine: A Prospective Randomized Clinical Trial10.1016/j.joen.2018.08.004 ↗
22. Outcome of Full Pulpotomy Using Biodentine in Adult Patients with Symptoms Indicative of Irreversible Pulpitis10.1111/iej.12903 ↗
23. Which Procedures and Materials Could Be Applied for Full Pulpotomy in Permanent Mature Teeth? A Systematic Review10.1080/00016357.2019.1614217 ↗
24. Occurrence and Risk Factors of Dental Root Perforations: A Systematic Review10.1111/idj.12602 ↗
25. The Restoration of Root Filled Teeth: A Review of the Clinical Literature10.1111/iej.13438 ↗
26. The Endocrown: An Alternative Approach for Restoring Extensively Damaged Molars10.1111/jerd.12065 ↗
27. Composite Resin Core Buildups With and Without Post for the Restoration of Endodontically Treated Molars Without Ferrule10.2341/14-258-L ↗
28. Comparison of Preparation of Curved Root Canals with Hyflex CM and Revo-S Rotary Nickel-Titanium Instruments10.1111/iej.12171 ↗
29. Resistance to Flexural Fatigue of Reciproc R25 Files under Continuous Rotation and Reciprocating Movement10.1016/j.joen.2011.12.033 ↗
30. Influence of Instrument Size on Root Canal Debridement10.1097/00004770-200402000-00012 ↗
31. Puleio, F., Lo Giudice, G., Militi, A., Bellezza, U., and Lo Giudice, R. (2022). Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review. Dent. J., 10.10.3390/dj10060094 ↗
32. Effect of Endocrown Restorations with Different CAD/CAM Materials: 3D Finite Element and Weibull Analyses10.1155/2017/5638683 ↗
33. Biomechanical Behavior of Endocrown Restorations with Different Cavity Design and CAD-CAM Materials under a Static and Vertical Load: A Finite Element Analysis10.1016/j.prosdent.2021.11.027 ↗
34. Resistance Fracture of Minimally Prepared Endocrowns Made by Three Types of Restorative Materials: A 3D Finite Element Analysis10.1007/s10856-021-06610-x ↗
35. He, J., Zheng, Z., Wu, M., Zheng, C., Zeng, Y., and Yan, W. (2021). Influence of Restorative Material and Cement on the Stress Distribution of Endocrowns: 3D Finite Element Analysis. BMC Oral Health, 21.10.1186/s12903-021-01865-w ↗
36. Biomechanical Behavior of Endocrown Restorations with Different CAD-CAM Materials: A 3D Finite Element and in Vitro Analysis10.1016/j.prosdent.2020.03.009 ↗
37. Zheng, Z., Sun, J., Jiang, L., Wu, Y., He, J., Ruan, W., and Yan, W. (2022). Influence of Margin Design and Restorative Material on the Stress Distribution of Endocrowns: A 3D Finite Element Analysis. BMC Oral Health, 22.10.1186/s12903-022-02063-y ↗
38. Endocrown Restorations: A Systematic Review and Meta-Analysis10.1016/j.jdent.2016.07.005 ↗
39. The Fracture Strength of Endocrowns Manufactured from Different Hybrid Blocks under Axial and Lateral Forces10.1007/s00784-020-03495-y ↗
40. Which Materials Would Account for a Better Mechanical Behavior for Direct Endocrown Restorations?10.1016/j.jmbbm.2019.103592 ↗
41. Biomechanical Behavior of Endodontically Treated Premolars Using Different Preparation Designs and CAD/CAM Materials10.1016/j.jdent.2017.02.007 ↗
42. Fracture Resistance and Microleakage of Endocrowns Utilizing Three CAD-CAM Blocks10.2341/13-143-L ↗
43. Polishing Effects and Wear Performance of Chairside CAD/CAM Materials10.1007/s00784-018-2473-3 ↗
44. Computer-Aided Designed/Computer-Assisted Manufactured Composite Resin versus Ceramic Single-Tooth Restorations: A 3-Year Clinical Study
45. Influence of Adhesive Core Buildup Designs on the Resistance of Endodontically Treated Molars Restored With Lithium Disilicate CAD/CAM Crowns10.2341/14-277-L ↗
46. Effect of Acid-Etching Procedure on Selected Physical Properties of Mineral Trioxide Aggregate10.1111/j.1365-2591.2009.01610.x ↗
47. Fracture Resistance of Endodontically Treated Teeth Restored with Biodentine, Resin Modified GIC and Hybrid Composite Resin as a Core Material
48. Shear Bond Strength of E. Max Ceramic Restoration to Hydraulic Calcium Silicate Based Cement (Biodentine): An In Vitro Study
49. Interface between Calcium Silicate Cement and Adhesive Systems According to Adhesive Families and Cement Maturation10.5395/rde.2021.46.e3 ↗
50. Fracture Resistance of Maxillary Premolars Restored with Different Endocrown Designs and Materials after Artificial Ageing10.2186/jpr.JPR_D_20_00082 ↗
51. Preparation Ferrule Design Effect on Endocrown Failure Resistance: Ferrule Design Effect Endocrown Failure Resistance10.1111/jopr.12671 ↗
52. Full-Crown Versus Endocrown Approach: A 3D-Analysis of Both Restorations and the Effect of Ferrule and Restoration Material10.1111/jopr.13244 ↗
53. Fracture Resistance of Endodontically-Treated Maxillary Premolars Restored with Different Type of Posts and Direct Composite Reconstructions: A Systematic Review and Meta-Analysis of in Vitro Studies10.1016/j.dental.2021.06.007 ↗
54. Finite Element and Weibull Analyses to Estimate Failure Risks in the Ceramic Endocrown and Classical Crown for Endodontically Treated Maxillary Premolar10.1111/j.1600-0722.2009.00704.x ↗
55. Effects of Moisture Content and Endodontic Treatment on Some Mechanical Properties of Human Dentin10.1016/S0099-2399(06)81262-8 ↗