Influence of the Application Time of Silane for the Bonding Performance between Feldspar or Lithium Disilicate Ceramics and Luting Resin Composites
Source abstract
Abstract
A correct silanization time is essential for successful surface functionalization and sufficient bonding to dental ceramics. The shear bond strength (SBS) of lithium disilicate (LDS) and feldspar (FSC) ceramics and luting resin composite was investigated with respect to different silanization times, taking into account the physical properties of the individual surfaces. The SBS test was performed with a universal testing machine, and the fracture surfaces were evaluated by stereomicroscopy. The surface roughness of the prepared specimens was analyzed after etching. Changes in surface properties due to surface functionalization were evaluated by surface free energy (SFE) via contact angle measurement. Fourier transform infrared spectroscopy (FTIR) was used to determine the chemical binding. The roughness and SBS of the control group (no silane, etched) were higher for FSC than for LDS. Regarding the SFE, the dispersive fraction increased and the polar fraction decreased after silanization. FTIR confirmed the presence of silane on the surfaces. The SBS of LDS showed a significant increase from 5 to 15 s, depending on the silane and luting resin composite. For FSC, cohesive failure was observed for all samples. For LDS specimens, a silane application time of 15 to 60 s is recommended. Based on clinical conditions, no difference between the silanization times was observed for FSC specimens, indicating that etching alone produces sufficient bonding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthetic Dentistry and Material Science, Leipzig University, 04109 Leipzig, Germany
Institute of Chemical Technology, Leipzig University, 04109 Leipzig, Germany
Department of Dental Prosthetics, UKR University Hospital Regensburg, 93053 Regensburg, Germany
References (62)
Show source-provided references
1. The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics10.1177/0022034517729134 ↗
2. Seating nonmetal crowns or fixed partial dentures with resin cement10.14219/jada.archive.1998.0184 ↗
3. Aspects of bonding between resin luting cements and glass ceramic materials10.1016/j.dental.2014.01.017 ↗
4. Outcome of bonded vs all-ceramic and metal- ceramic fixed prostheses for single tooth replacement
5. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs)10.1016/j.dental.2015.02.011 ↗
6. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness10.1016/j.prosdent.2014.12.003 ↗
7. Cementing all-ceramic restorations: Recommendations for success10.14219/jada.archive.2011.0339 ↗
8. Effect of adhesive resin cements on bond strength of ceramic core materials to dentin10.4103/njcp.njcp_10_17 ↗
9. Cementation of Glass-Ceramic Posterior Restorations: A Systematic Review
10. Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions10.1016/j.dental.2006.11.011 ↗
11. Effect of prior silane application on the bond strength of a universal adhesive to a lithium disilicate ceramic
12. Effect of silane pretreatment on the immediate bonding of universal adhesives to computer-aided design/computer-aided manufacturing lithium disilicate glass ceramics10.1111/eos.12340 ↗
13. Aspects of silane coupling agents and surface conditioning in dentistry: An overview10.1016/j.dental.2012.02.009 ↗
14. The Role of Silane Coupling Agents and Universal Primers in Durable Adhesion to Dental Restorative Materials—A Review
15. Effect of siloxane quantity and ph of silane coupling agents and contact angle of resin bonding agent on bond durability of resin cements to machinable ceramic
16. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
17. Bond durability of the resin-bonded and silane treated ceramic surface10.1016/S0109-5641(01)00047-1 ↗
18. Silane treatment effects on glass/resin interfacial shear strengths10.1016/S0109-5641(02)00089-1 ↗
19. Effect of post-silanization drying on the bond strength of composite to ceramic10.1016/j.prosdent.2004.03.007 ↗
20. Effects of treatment and storage conditions on ceramic/composite bond strength10.1177/00220345950740011501 ↗
21. Vivadent, I. (2022, January 27). Monobond Plus: Brochure EN. Available online: https://downloadcenter.ivoclar.com/#search-text=monobond&details=5873.
22. (2022, December 16). Clearfil Ceramic Primer Plus—Primer for Cement & Repair Indications. Available online: https://www.kuraraynoritake.eu/en/clearfil-ceramic-primer-plus.
23. Adhesive luting of new CAD/CAM materials
24. The effect of milling and postmilling procedures on the surface roughness of CAD/CAM materials10.1111/jerd.12326 ↗
25. Influence of surface roughness on mechanical properties of two computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials10.2341/11-391-L ↗
26. Effect of thermocycling on bond strength of luting cements to zirconia ceramic10.1016/j.dental.2005.04.016 ↗
27. The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements10.1016/S0022-3913(12)60070-5 ↗
28. (2022). Dentistry—Testing of Adhesion to Tooth Structure. Standard No. ISO/TS 11405:2015. Available online: https://www.iso.org/standard/62898.html.
29. Effects of three silane primers and five adhesive agents on the bond strength of composite material for a computer-aided design and manufacturing system10.1590/1678-7757-2017-0342 ↗
30. Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics10.19082/5487 ↗
31. One-bottle silane coupling agent containing 4-META10.4012/dmj.2012-133 ↗
32. Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment10.1016/0002-9416(84)90190-8 ↗
33. Porcelain laminate veneer conditioning for orthodontic bonding: SEM-EDX analysis10.1007/s10103-014-1682-5 ↗
34. Adhesive luting of orthodontic devices to silica-based ceramic crowns-comparison of shear bond strength and surface properties10.1007/s00784-019-03168-5 ↗
35. Shear bond strengths of seven self-etching primers after thermo-cycling10.1007/s00056-011-0041-4 ↗
36. (2022). Geometrical Product Specifications (GPS)—Surface Texture: Areal—Part 2: Terms, Definitions and Surface Texture Parameters. Standard No. ISO 25178-2:2021. Available online: https://www.iso.org/standard/74591.html.
37. Schubert, A., Wassmann, T., Holtappels, M., Kurbad, O., Krohn, S., and Bürgers, R. (2019). Predictability of Microbial Adhesion to Dental Materials by Roughness Parameters. Coatings, 9.10.3390/coatings9070456 ↗
38. Surface-wetting characterization using contact-angle measurements10.1038/s41596-018-0003-z ↗
39. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
40. HF etching of CAD/CAM materials: Influence of HF concentration and etching time on shear bond strength10.1186/s13005-019-0206-8 ↗
41. Shear bond strengths of four resin bonding systems to two silica-based machinable ceramic materials10.4012/dmj.25.621 ↗
42. Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance10.1016/j.jpor.2017.06.002 ↗
43. Comparison of two test designs for evaluating the shear bond strength of resin composite cements10.1016/j.dental.2015.11.023 ↗
44. Assessment of Bonding Effectiveness of Adhesive Materials to Tooth Structure using Bond Strength Test Methods: A Review of Literature10.2174/1745017901814010664 ↗
45. Chairside CAD/CAM materials. Part 2: Flexural strength testing10.1016/j.dental.2016.10.008 ↗
46. Shen, D., Wang, H., Shi, Y., Su, Z., Hannig, M., and Fu, B. (2023). The Effect of Surface Treatments on Zirconia Bond Strength and Durability. J. Funct. Biomater., 14.10.3390/jfb14020089 ↗
47. Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols10.1016/j.dental.2011.10.009 ↗
48. Shear vs. tensile bond strength of resin composite bonded to ceramic10.1177/00220345950740091401 ↗
49. Comba, A., Baldi, A., Carossa, M., Michelotto Tempesta, R., Garino, E., Llubani, X., Rozzi, D., Mikonis, J., Paolone, G., and Scotti, N. (2022). Post-Fatigue Fracture Resistance of Lithium Disilicate and Polymer-Infiltrated Ceramic Network Indirect Restorations over Endodontically-Treated Molars with Different Preparation Designs: An In-Vitro Study. Polymers, 14.10.3390/polym14235084 ↗
50. Investigations of silane-MDP interaction in universal adhesives: A ToF-SIMS analysis10.1016/j.dental.2021.12.002 ↗
51. The Influence of pH on the Hydrolysis Process of γ-Methacryloxypropyltrimethoxysilane, Analyzed by FT-IR, and the Silanization of Electrogalvanized Steel10.1163/016942409X12586283821559 ↗
52. Characterization of Organofunctional Silane Films on Zinc Substrates10.1006/jcis.1996.4604 ↗
53. Delgado, A.H., and Young, A.M. (2021). Modelling ATR-FTIR Spectra of Dental Bonding Systems to Investigate Composition and Polymerisation Kinetics. Materials, 14.10.3390/ma14040760 ↗
54. Bellamy, L.J., and Beecher, L. (1952). 315. The infra-red spectra of organo-phosphorus compounds. Part II. Esters, acids, and amines. J. Chem. Soc., 1701–1706.10.1039/jr9520001701 ↗
55. Effect of P2O5 and Al2O3 on crystallization, structure, microstructure and properties of Li2O–MgO–Al2O3–SiO2–TiO2–ZrO2 glass ceramics10.1016/j.bsecv.2020.08.004 ↗
56. Effectiveness of pre-silanization in improving bond performance of universal adhesives or self-adhesive resin cements to silica-based ceramics: Chemical and in vitro evidences10.1016/j.dental.2019.01.010 ↗
57. Dipentaerythritol penta-acrylate phosphate—An alternative phosphate ester monomer for bonding of methacrylates to zirconia10.1038/srep39542 ↗
58. Raw glass-ceramics glazes from SiO2–Al2O3–CaO–MgO–Na2O–K2O system modified by ZrO2 addition—Changes of structure, microstructure and surface properties10.1016/j.oceram.2021.100188 ↗
59. Silane reactivity and resin bond strength to lithium disilicate ceramic surfaces10.1016/j.dental.2019.05.002 ↗
60. EDXRF and FTIR Analysis of Some Glass Fragments Belong to Ottoman Period, Excavated in Ancient Ainos (Enez) Turkey10.14233/ajchem.2013.15545 ↗
61. Ex situ XRD, TEM, IR, Raman and NMR spectroscopy of crystallization of lithium disilicate glass at high pressure10.1016/j.jnoncrysol.2006.06.038 ↗
62. Study of Lithium Disilicate Based Nano Glass Ceramics Containing P2O510.1007/s12633-021-01610-6 ↗