The Effect of Acrylic Surface Preparation on Bonding Denture Teeth to Cellulose Fiber-Reinforced Denture Base Acrylic
Source abstract
Abstract
Patients who require dental prosthetic restoration using frame dentures in the front part of the mouth very frequently report that teeth fall out of their dentures. However, the available scientific papers are insufficient to compare the various methods of improving the connection between the denture base and the artificial tooth and choosing the best solution. This paper focuses on providing all parameters, enabling the reproduction of tests, and accounting for all variables. The paper uses an original method of creating grooves, sandpaper, sandblasting, and cutting the acrylate layer with a burr in one and two directions. Developed surfaces were additionally subjected to detailed examination. This study used 180 specimens divided into three groups and subjected to various environments (dry, artificial saliva, and thermocycles). Shearing and tensile strength tests were performed. The best results were obtained with a carbide burr. The increase in connection durability was as follows in the case of the shear test: 116.47% in dry samples, 155.38% in samples soaked in artificial saliva, and 46.59% in samples after thermocycles. The increase in tensile resistance was: 198.96% in a dry environment, 88.10% before being soaked in artificial saliva, and 94.04% after thermocycles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, Poland
University Laboratory of Material Research, Medical University of Lodz, Pomorska 251, 92-213 Lodz, Poland
Department of General Dentistry, Medical University of Lodz, Pomorska 251, 92-213 Lodz, Poland
References (59)
Show source-provided references
1. Powers, M.J., and Wataha, C.J. (2014). Dental Materials: Properties and Manipulation, Elsevier Health Sciences. [10th ed.].
2. Raszewski, Z. (2009). A New View at Acrylic Materials, Elamed.
3. Dejak, B. (2014). Compendium of Making Prosthetic Restorations, Med Tour Press International.
4. Bond between single artificial teeth and the base plate in removable denture metal framework
5. Carr, A., and David, B. (2015). McCracken’s Removable Partial Prosthodontics, Mosby. [13th ed.].
6. Taczała, J. (2020). Influence of the inhibitor on the properties of dental acrylic resin. The Book of Articles National Scientific Conference “Knowledge—Key to Success, Promovendi Foundation Publishing. [4th ed.].
7. Mechanical properties of hot curing acrylic resins after reinforced with different kinds of fibers
8. Majewski, S.W., and Pryliński, M. (2013). Materials and Technologies of Contemporary Dental Prosthetics: A Textbook for Dentistry Students, Doctors and Dental Technicians, Czelej.
9. Effects of different surface treatments on the bond strength of acrylic denture teeth to polymethylmethacrylate denture base material10.1089/pho.2014.3732 ↗
10. The effect of different chemical surface treatments of denture teeth on shear bond strength: A comparative study
11. Bond strength assessment between acrylic teeth and acrylic resin repairs: Effect of different surface treatments10.15517/ijds.v0i0.25035 ↗
12. Bond strength of denture teeth to heat-cured, CAD/CAM and 3D printed denture acrylics10.1111/jopr.13125 ↗
13. Shear bond strength of denture teeth to two chemically different denture base resins after various surface treatments10.1111/jopr.12081 ↗
14. Comparative evaluation of the effect of surface treatments on theshearbond strength between acrylic denture teeth and denture base resin—Three dimensional study
15. (2022, September 09). Schütz Dental GmbH, FuturAcryl 2000, RosbacH. Available online: https://www.schuetz-dental.de/media/pdf/60/3a/0f/Product_Catalog_English.pdf.
16. Taczała, J. (2018). Influence of the groove on stress distribution and deformations in the case of a single incisor in removable partial denture metal framework. The Book of Articles National Scientific Conference “Zrozumieć Naukę”, Promovendi Foundation Publishing. [2nd ed.].
17. Numerical analysis of the influence of surface modification on the bond strength between a single incisal tooth with a removable partial denture metal framework10.1063/1.5092060 ↗
18. Comparative evaluation of different mechanical modifications of denture teeth on bond strength between high-impact acrylic resin and denture teeth: An in vitro study10.4103/2231-0762.178740 ↗
19. Effect of ridge-lap surface treatments on the bond of resin teeth to denture base
20. Bonding acrylic teeth to acrylic resin denture bases: A review10.1111/j.1741-2358.2006.00129.x ↗
21. Microtensile bond strength of different acrylic teeth to high-impact denture base resins10.1111/jopr.12196 ↗
22. Effect of surface treatments on the bond strength of different resin teeth to complete denture base material
23. Effect of pre-processing surface treatments of acrylic teeth on bonding to the denture base10.1111/j.1365-2842.2007.01779.x ↗
24. Evaluation of bond strength of denture teeth bonded to heat polymerized acrylic resin denture bases
25. Denture fracture: A survey10.1038/sj.bdj.4808449 ↗
26. Taczała, J., Sawicki, J., and Pietrasik, J. (2020). Chemical modification of cellulose microfibres to reinforce poly(methyl methacrylate) used for dental application. Materials, 13.10.3390/ma13173807 ↗
27. The use of different alumina fillers for improvement of the mechanical properties of hybrid PMMA composites10.1016/j.matdes.2015.07.069 ↗
28. PMMA denture base material enhancement: A review of fiber, filler, and nanofiller addition10.2147/IJN.S130722 ↗
29. Explorative study on the antibacterial effects of 3D-printed PMMA/nitrides composites10.1016/j.matdes.2021.109788 ↗
30. Effect of silica filler on properties of PMMA resin
31. Alhotan, A., Yates, J., Zidan, S., Haider, J., and Silikas, N. (2021). Flexural strength and hardness of filler-reinforced PMMA targeted for denture base application. Materials, 14.10.3390/ma14102659 ↗
32. Influence different amount of cellulose on the mechanical strength of dental acrylic resin
33. Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin10.1046/j.1365-2842.2000.00489.x ↗
34. Czepułkowska, W., and Klimek, L. (2019). Comparison of surface roughness of Ni-Cr alloy after abrasive blasting using Al2O3 and SiC. The Book of Articles—National Scientific Conference “ Knowledge-Key to Success 2019”, Promovendi Foundation Publishing. [3rd ed.].
35. The role of mechanical, chemical and physical bonds in metal-ceramic bond strength
36. Airborne-particle abrasion parameters on the quality of titanium-ceramic bonds10.1016/j.prosdent.2014.10.007 ↗
37. Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base10.1067/mpr.2002.127898 ↗
38. Urban, Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages10.1590/1678-775720150054 ↗
39. Surface morphology changes of acrylic resins during finishing and polishing phases10.1590/S2176-94512013000600005 ↗
40. The effect of mechanical and chemical polishing techniques on the surface roughness of heat-polymerized and visible light-polymerized acrylic denture base resins10.1016/j.sdentj.2013.12.007 ↗
41. Taczała, J., Rak, K., Sawicki, J., and Krasowski, M. (2021). Numerical analysis of the bond strength between two methacrylic polymers by surface modification. Materials, 14.10.3390/ma14143927 ↗
42. Evaluation of the bond strength of denture base resins to acrylic resin teeth: Effect of thermocycling10.1111/j.1532-849X.2009.00478.x ↗
43. Bond strength of denture teeth to acrylic resin: Effect of thermocycling and polymerisation methods10.1111/j.1741-2358.2008.00218.x ↗
44. Bonding of acrylic denture teeth to MMA/PMMA and light-curing denture base materials: The role of conditioning liquids10.1016/j.jdent.2011.12.010 ↗
45. Szczesio-Wlodarczyk, A., Sokolowski, J., Kleczewska, J., and Bociong, K. (2020). Ageing of dental composites based on methacrylate resins-A critical review of the causes and method of assessment. Polymers, 12.10.3390/polym12040882 ↗
46. Bonding cold-curing denture base acrylic resin to acrylic resin reeth10.14219/jada.archive.1971.0355 ↗
47. Failure load of acrylic resin denture teeth bonded to high impact acrylic resins10.1016/S0022-3913(98)70053-8 ↗
48. Ultrananocrystalline diamond coatings for the dental implant: Electrochemical nature10.1680/jsuin.16.00023 ↗
49. Effect of fluoride on nickel-titanium and stainless steel orthodontic archwires: An in-vitro study
50. (2015). Fusayama/Meyer Artificial Saliva, MSDS 1700-0301; Pickering Laboratories.
51. Characterization, mechanistic analysis and improving the properties of denture adhesives10.1016/j.dental.2017.09.015 ↗
52. Artificial saliva and its use in biological experiments
53. Effect of the machine parts surface topography features on the machine service10.17814/mechanik.2015.8-9.493 ↗
54. The use of statistical elements in the research process on the example of measurements of selected parameters of surface roughness
55. Analysis and comparison of the accuracy of selected incremental manufacturing methods
56. The effect of mechanical and chemical polishing techniques on the surface roughness of denture base acrylic resins10.1016/j.sdentj.2009.12.006 ↗
57. Silesia Dental (2022, September 01). Frezy. Available online: https://silesiadental.pl/produkty/protetyka-tradycyjna/produkty-do-obrobki/frezy/frezy/.
58. Synthesis and characterization of poly (methyl methacrylate) polymerized by microwave energy or conventional water bath10.1002/app.28569 ↗
59. Okulus, Z. (2016). Preparation and Characterization of Dental Composite Materials, Poznan University of Technology.