Biological Characterization of 3D-Printed, Sintered Hydroxyapatite Scaffolds Obtained by Fused Filament Fabrication: An In Vitro Study
Source abstract
Abstract
This study characterized the biological response of MG-63 cells to synthetic, hydroxyapatite scaffolds (HAsint) fabricated via fused filament fabrication. Scaffolds were compared to 2D plate-adherent cultures using six assays: cell morphology and distribution with scanning electron microscopy and confocal laser scanning microscopy; cell proliferation and cytotoxicity via WST-1 tetrazolium assay; relative osteogenic gene expression through reverse-transcription–quantitative polymerase chain reaction, and protein synthesis via multiplex immunoassay. Data were analyzed using one-way ANOVA. Results confirmed high cell viability and uniform distribution on HAsint scaffolds. Proliferation increased significantly over 7 days, though direct cytotoxicity also increased, likely due to the static conditions of the experiment and, subsequently, the high ion reprecipitation from scaffold degradation. Importantly, HAsint scaffolds significantly enhanced osteogenic marker expression of phosphatase alkaline (ALPL), osteopontin (OPN), and osteocalcin (OCN) genes, and elevated concentrations of interleukins (IL)-6, IL-8 and matrix metalloproteinase 1 compared to plate-adherent controls. It can be concluded that 3D-printed HAsint scaffolds support robust osteogenic differentiation and proliferation despite inducing a transient cytotoxic response in vitro. The marked upregulation of key osteogenic genes and proteins confirms the scaffolds’ bioactivity and highlights their potential for bone tissue engineering applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Etiology and Therapy of Periodontal and Peri-Implant Diseases (ETEP) Research Group, Complutense University of Madrid, 28040 Madrid, Spain
Doctorate Programme in Dental Sciences, Complutense University of Madrid, 28040 Madrid, Spain
Institute of Ceramics and Glass (ICV), Spanish National Research Council (CSIC), 28049 Madrid, Spain
References (56)
Show source-provided references
1. Regenerating bone with bioactive glass scaffolds: A review of in vivo studies in bone defect models10.1016/j.actbio.2017.08.030 ↗
2. Bone grafts: Which is the ideal biomaterial?10.1111/jcpe.13058 ↗
3. Current trends and future perspectives of bone substitute materials—From space holders to innovative biomaterials10.1016/j.jcms.2012.01.002 ↗
4. Biomaterials and regenerative technologies used in bone regeneration in the craniomaxillofacial region: Consensus report of group 2 of the 15th European Workshop on Periodontology on Bone Regeneration10.1111/jcpe.13123 ↗
5. Engineered biomaterials for in situ tissue regeneration10.1038/s41578-020-0209-x ↗
6. Wang, X., Mu, M., Yan, J., Han, B., Ye, R., and Guo, G. (2024). 3D printing materials and 3D printed surgical devices in oral and maxillofacial surgery: Design, workflow and effectiveness. Regen. Biomater., 11.10.1093/rb/rbae066 ↗
7. 3D printing for bone regeneration: Challenges and opportunities for achieving predictability10.1111/prd.12525 ↗
8. 3D and 4D printing hydroxyapatite-based scaffolds for bone tissue engineering and regeneration10.1016/j.heliyon.2023.e19363 ↗
9. Preparation of poly(lactic acid)/sintered hydroxyapatite composite biomaterial by supercritical CO2
10. Shan, E., Chamorro, C., Ferrández-Montero, A., Martin-Rodriguez, R.M., Ferrari, B., Sanchez-Herencia, A.J., Virto, L., Marín, M.J., Figuero, E., and Sanz, M. (2025). In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite-Polylactic Acid Scaffolds Intended for Bone Regeneration. J. Funct. Biomater., 16.10.3390/jfb16060218 ↗
11. State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective10.1002/term.24 ↗
12. Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds10.1002/pc.28263 ↗
13. Mathiazhagan, N., Palaniyappan, S., and Sivakumar, N.K. (2023). Effect of fused filament fabrication parameters on crashworthiness studies of hydroxyapatite particle reinforced PLA composite thin-walled tubes. J. Mech. Behav. Biomed. Mater., 138.10.1016/j.jmbbm.2022.105611 ↗
14. Application of fused deposition modeling (FDM) on bone scaffold manufacturing process: A review10.1016/j.heliyon.2022.e11701 ↗
15. Li, Y.-C., Zhang, Y.S., Akpek, A., Shin, S.R., and Khademhosseini, A. (2017). 4D bioprinting: The next-generation technology for biofabrication enabled by stimuli-responsive materials. Biofabrication, 9.10.1088/1758-5090/9/1/012001 ↗
16. Biological and Medical Significance of Calcium Phosphates10.1002/1521-3773(20020902)41:17<3130::AID-ANIE3130>3.0.CO;2-1 ↗
17. A thorough physicochemical characterisation of 14 calcium phosphate-based bone substitution materials in comparison to natural bone10.1016/S0142-9612(03)00621-5 ↗
18. 3D printing of hydroxyapatite polymer-based composites for bone tissue engineering10.1515/polyeng-2016-0194 ↗
19. Substituted hydroxyapatites for bone regeneration: A review of current trends10.1002/jbm.b.33651 ↗
20. Zhao, R., Yang, R., Cooper, P.R., Khurshid, Z., Shavandi, A., and Ratnayake, J. (2021). Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments. Molecules, 26.10.3390/molecules26103007 ↗
21. Carotenuto, F., Politi, S., Ul Haq, A., De Matteis, F., Tamburri, E., Terranova, M.L., Teodori, L., Pasquo, A., and Di Nardo, P. (2022). From Soft to Hard Biomimetic Materials: Tuning Micro/Nano-Architecture of Scaffolds for Tissue Regeneration. Micromachines, 13.10.3390/mi13050780 ↗
22. The influence of micropore size on the mechanical properties of bulk hydroxyapatite and hydroxyapatite scaffolds10.1016/j.jmbbm.2009.01.009 ↗
23. Nanoporosity significantly enhances the biological performance of engineered glass tissue scaffolds10.1089/ten.tea.2012.0585 ↗
24. Chia, H.N., and Wu, B.M. (2015). Recent advances in 3D printing of biomaterials. J. Biol. Eng., 9.10.1186/s13036-015-0001-4 ↗
25. Ghayor, C., Bhattacharya, I., Guerrero, J., Ozcan, M., and Weber, F.E. (2022). 3D-Printed HA-Based Scaffolds for Bone Regeneration: Microporosity, Osteoconduction and Osteoclastic Resorption. Materials, 15.10.3390/ma15041433 ↗
26. The effect of sintering temperature on the microstructure and mechanical properties of a bioceramic bone scaffold10.1016/j.jmbbm.2011.07.015 ↗
27. Development of high strength hydroxyapatite by solid-state-sintering process10.1016/j.ceramint.2005.10.025 ↗
28. Pei, X., Ma, L., Zhang, B., Sun, J., Sun, Y., Fan, Y., Gou, Z., Zhou, C., and Zhang, X. (2017). Creating hierarchical porosity hydroxyapatite scaffolds with osteoinduction by three-dimensional printing and microwave sintering. Biofabrication, 9.10.1088/1758-5090/aa90ed ↗
29. Bertone, P.M., Olevsky, L.M., Kathir, K., Agnew, S.A., Scheideler, W.J., and Hixon, K.R. (2025). Sintering 3D-Printed Hydroxyapatite-Wollastonite Lattices Improve Bioactivity and Mechanical Integrity for Bone Composite Scaffolds. bioRxiv.10.1101/2025.04.06.647463 ↗
30. Kim, C., Lee, J.W., Heo, J.H., Park, C., Kim, D.H., Yi, G.S., Kang, H.C., Jung, H.S., Shin, H., and Lee, J.H. (2022). Natural bone-mimicking nanopore-incorporated hydroxyapatite scaffolds for enhanced bone tissue regeneration. Biomater. Res., 26.10.1186/s40824-022-00253-x ↗
31. Mechanical and biological evaluation of a hydroxyapatite-reinforced scaffold for bone regeneration10.1002/jbm.a.36588 ↗
32. Effects of microwave sintering on the properties of porous hydroxyapatite scaffolds10.1016/j.ceramint.2012.08.091 ↗
33. New approach to improve polymer-Mg interface in biodegradable PLA/Mg composites through particle surface modification10.1016/j.surfcoat.2019.125285 ↗
34. Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling10.1016/j.ceramint.2018.07.297 ↗
35. Colloidal approach to fabricate high-loaded feedstocks for material extrusion of dense sintered Al2O3 structures for biomedical applications10.1016/j.bsecv.2025.01.004 ↗
36. Influence of pore dimensions on bone ingrowth into porous hydroxylapatite blocks used as bone graft substitutes: A histometric study10.1016/S0901-5027(05)80698-8 ↗
37. Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research10.1002/jbm.a.20015 ↗
38. Review on current limits and potentialities of technologies for biomedical ceramic scaffolds production10.1002/jbm.b.34706 ↗
39. Bogala, M.R. (2022). Three-dimensional (3D) printing of hydroxyapatite-based scaffolds: A review. Bioprinting, 28.10.1016/j.bprint.2022.e00244 ↗
40. Kumar, A., Kargozar, S., Baino, F., and Han, S.S. (2019). Additive Manufacturing Methods for Producing Hydroxyapatite and Hydroxyapatite-Based Composite Scaffolds: A Review. Front. Mater., 6.10.3389/fmats.2019.00313 ↗
41. Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds10.1016/j.actbio.2011.08.027 ↗
42. The effect of thermal treatment on sterility, molecular and mechanical properties of various polylactides: I. Poly(l-lactide)10.1016/0142-9612(96)82727-X ↗
43. Sterilization techniques for biodegradable scaffolds in tissue engineering applications10.1177/2041731416648810 ↗
44. Phenotypic stability of the human MG-63 osteoblastic cell line at different passages10.1002/cbin.11073 ↗
45. Effect of biomimetic 3D environment of an injectable polymeric scaffold on MG-63 osteoblastic-cell response10.1016/j.msec.2010.06.005 ↗
46. Distinctions in bone matrix nanostructure, composition, and formation between osteoblast-like cells, MG-63, and human mesenchymal stem cells, UE7T-1310.1016/j.heliyon.2023.e15556 ↗
47. Researching into the cellular shape, volume and elasticity of mesenchymal stem cells, osteoblasts and osteosarcoma cells by atomic force microscopy10.1111/j.1582-4934.2007.00138.x ↗
48. Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility10.1016/j.ceramint.2019.02.195 ↗
49. Retegi-Carrión, S., Ferrandez-Montero, A., Eguiluz, A., Ferrari, B., and Abarrategi, A. (2022). The Effect of Ca2+ and Mg2+ Ions Loaded at Degradable PLA Membranes on the Proliferation and Osteoinduction of MSCs. Polymers, 14.10.3390/polym14122422 ↗
50. Liu, Y.K., Lu, Q.Z., Pei, R., Ji, H.J., Zhou, G.S., Zhao, X.L., Tang, R.K., and Zhang, M. (2009). The effect of extracellular calcium and inorganic phosphate on the growth and osteogenic differentiation of mesenchymal stem cells in vitro: Implication for bone tissue engineering. Biomed. Mater., 4.10.1088/1748-6041/4/2/025004 ↗
51. “False” cytotoxicity of ions-adsorbing hydroxyapatite—Corrected method of cytotoxicity evaluation for ceramics of high specific surface area10.1016/j.msec.2016.03.105 ↗
52. Osteogenic activity of MG63 cells on bone-like hydroxyapatite/collagen nanocomposite sponges10.1007/s10856-009-3938-3 ↗
53. Gregor, A., Filova, E., Novak, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., and Nečas, A. (2017). Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer. J. Biol. Eng., 11.10.1186/s13036-017-0074-3 ↗
54. Correlating cell architecture with osteogenesis: First steps towards live single cell monitoring
55. Xu, J., Yu, L., Liu, F., Wan, L., and Deng, Z. (2023). The effect of cytokines on osteoblasts and osteoclasts in bone remodeling in osteoporosis: A review. Front. Immunol., 14.10.3389/fimmu.2023.1222129 ↗
56. Mangano, C., Giuliani, A., De Tullio, I., Raspanti, M., Piattelli, A., and Iezzi, G. (2021). Case Report: Histological and Histomorphometrical Results of a 3-D Printed Biphasic Calcium Phosphate Ceramic 7 Years After Insertion in a Human Maxillary Alveolar Ridge. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.614325 ↗