journal article·2025-07-05Open access

The Influence of Drying Time, Application Mode, and Agitation on the Dentin Bond Strength of a Novel Mesoporous Bioactive Glass-Containing Universal Dentin Adhesive

Jiyoung Kwon, Jungwon Kim, Dongseok Choi, Duck-Su Kim

Abstract

This study evaluated the influence of drying time, application mode, and agitation on the micro-tensile bond strength (μTBS) of a novel mesoporous bioactive glass-containing universal adhesive (Hi-Bond Universal). Twelve experimental groups were established according to drying time (blot-dry, 10 s dry, or 20 s dry), application mode (total-etch or self-etch), and agitation (with or without). The μTBS test and failure mode analysis were performed for each experimental group (n = 20), and an adhesive interface was observed using field-emission scanning electron microscopy. The μTBS of all experimental groups was analyzed using a three-way ANOVA and Tukey’s honestly significant difference (HSD) post hoc test (α = 0.05). The total-etch mode yielded higher μTBS than the self-etch mode in the blot-dry and 10 s dry groups (p < 0.05). Agitation also significantly increased the μTBS in the blot-dry and 10 s dry groups for both application modes (p < 0.05). However, application mode and agitation had no effect on the μTBS in the 20 s dry group (p > 0.05). FE-SEM revealed longer and more uniform resin tags after agitation in the blot-dry and 10 s dry groups for both application modes. In conclusion, total-etch mode and agitation effectively increased the bond strength of mesoporous bioactive glass-containing universal adhesives.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Conservative Dentistry, Kyung Hee University Dental Hospital, Seoul 02447, Republic of Korea

Department of Conservative Dentistry, Armed Forces Capital Dental Hospital, Seongnam-si 13574, Republic of Korea

OHSU-PSU School of Public Health, Oregon Health & Science University, Portland, OR 97239, USA

Department of Conservative Dentistry, School of Dentistry, Kyung Hee University, Seoul 02453, Republic of Korea

Funding

National Research Foundation of Korea (NRF)

References (44)

Show source-provided references
1. The Effects of Common Errors on Sealing Ability of Total-Etch Adhesives10.1016/j.dental.2005.06.004 ↗
2. Choi, A.N., Lee, J.H., Son, S.A., Jung, K.H., Kwon, Y.H., and Park, J.K. (2017). Effect of Dentin Wetness on the Bond Strength of Universal Adhesives. Materials, 10.10.3390/ma10111224 ↗
3. Effects of Resin Hydrophilicity on Dentin Bond Strength10.1177/154405910608501108 ↗
4. Dental Adhesion Review: Aging and Stability of the Bonded Interface10.1016/j.dental.2007.02.009 ↗
5. Long-Term Evaluation of Bonding Performance of Universal Adhesives Based on Different Dentinal Moisture Levels
6. Long-Term Mechanical Properties of EDTA-Demineralized Dentin Matrix
7. Long-Term Durability of Dentin Bonds Made with a Self-Etching Primer, In Vivo10.1177/00220345990780041101 ↗
8. An Update on Universal Adhesives: Indications and Limitations10.1007/s40496-022-00309-w ↗
9. Current Aspects on Bonding Effectiveness and Stability in Adhesive Dentistry10.1111/j.1834-7819.2011.01294.x ↗
10. Dentin Bonding: Can We Make It Last?10.2341/14-095-BL ↗
11. Effects of Cavity Configuration on Composite Restoration
12. Effect of Moisture and Drying Time on the Bond Strength of the One-Step Self-Etching Adhesive System10.5395/rde.2012.37.3.155 ↗
13. Bond Strength of Adhesive Systems with Different Solvents to Dry and Wet Dentin10.5005/jp-journals-10024-1261 ↗
14. Dry Bonding to Dentin: Broadening the Moisture Spectrum and Increasing Wettability of Etch-and-Rinse Adhesives10.1016/j.dental.2021.08.021 ↗
15. Bonding of Universal Adhesives to Bur-Cut Dentin: Effect of Double Application and Dentin Moisture Level10.4012/dmj.2021-310 ↗
16. Influence of Moisture Conditions on Dentin Bond Strength of Single-Step Self-Etch Adhesive Systems10.2334/josnusd.48.131 ↗
17. Effect of Various Agitation Methods on Adhesive Layer Formation of HEMA-Free Universal Dentin Adhesive10.4012/dmj.2018-031 ↗
18. Bonding of Mild Self-Etching Primers/Adhesives to Dentin with Thick Smear Layers
19. Effect of Placement Agitation and Placement Time on the Shear Bond Strength of 3 Self-Etching Adhesives10.2341/05-52 ↗
20. Overview of Clinical Alternatives to Minimize the Degradation of the Resin-Dentin Bonds10.2341/12-258-LIT ↗
21. Effect of Rubbing Force Magnitude on Bond Strength of Universal Adhesives Applied in Self-Etch Mode10.4012/dmj.2017-018 ↗
22. Universal Adhesives: A Literature Review
23. Self-Assembled Nano-Layering at the Adhesive Interface10.1177/0022034512437375 ↗
24. The Story of Bioglass®10.1007/s10856-006-0432-z ↗
25. A 58S Bioactive Glass for Dentin Hypersensitivity and Erosive Tooth Wear: An In Vitro Study10.1016/j.jdent.2022.104343 ↗
26. Bioactive Glass and High-Intensity Lasers as a Promising Treatment for Dentin Hypersensitivity: An In Vitro Study10.1002/jbm.b.34446 ↗
27. Bovine Tooth Is a Substitute for Human Tooth on Bond Strength Studies: A Systematic Review and Meta-Analysis of In Vitro Studies10.1016/j.dental.2016.09.019 ↗
28. Al-Zain, A.O., Albuqayli, A., Albogami, A., Alkudsi, A., Alwabiri, M., Koshak, A.T., Alsefri, H., and Munchow, E.A. (2024). Effect of Double Adhesive Layer Application on Micro-Tensile Dentin Bond Strength of a Universal Adhesive. Front. Dent. Med., 5.10.3389/fdmed.2024.1484498 ↗
29. Samy, F.M., El-Kholany, N.R., and Hamama, H.H. (2025). Evaluation of Bond Durability of Different Self-Adhesive Bioactive Restorative Systems to Dentin. Sci. Rep., 15.10.1038/s41598-024-81351-9 ↗
30. Moist vs Over-Dried Etched Dentin: FE-SEM/TEM and Bond Strength Evaluation of Resin-Dentin Interfaces Produced by Universal Adhesives10.1111/jerd.12537 ↗
31. Effect of Prolonged Air Drying on the Bond Strength of Adhesive Systems to Dentin
32. The Microtensile Bond Test: A Review
33. Field Emission SEM Comparison of Four Postfixation Drying Techniques for Human Dentin10.1002/jbm.820290911 ↗
34. Park, I.S., Kim, H.J., Kwon, J., and Kim, D.S. (2025). Comparative In Vitro Study of Sol–Gel-Derived Bioactive Glasses Incorporated into Dentin Adhesives: Effects on Remineralization and Mechanical Properties of Dentin. J. Funct. Biomater., 16.10.3390/jfb16010029 ↗
35. Kim, H.J., Jang, J.H., Woo, S.U., Choi, K.K., Kim, S.Y., Ferracane, J.L., and Kim, D.S. (2021). Effect of Novel Bioactive Glass-Containing Dentin Adhesive on the Permeability of Demineralized Dentin. Materials, 14.10.3390/ma14185423 ↗
36. Oltramare, R., Par, M., Mohn, D., Wiedemeier, D.B., Attin, T., and Tauböck, T.T. (2021). Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives. Nanomaterials, 11.10.3390/nano11081894 ↗
37. Bond Strength of Universal Adhesives: A Systematic Review and Meta-Analysis10.1016/j.jdent.2015.04.003 ↗
38. Nanoleakage Patterns of Four Dentin Bonding Systems10.1016/S0109-5641(99)00085-8 ↗
39. Adhesion to Enamel and Dentin: Current Status and Future Challenges
40. Effect of Smear Layer and Surface Roughness on Resin-Dentin Bond Strength of Self-Etching Adhesives10.4012/dmj.2017-349 ↗
41. Impact of Adhesive Application to Wet and Dry Dentin on Long-Term Resin-Dentin Bond Strengths10.2341/06-107 ↗
42. Permeability of Dentin to Adhesive Agents
43. Effect of Dentine Smear Layer on the Performance of Self-Etching Adhesive Systems: A Micro-Tensile Bond Strength Study10.1002/jbm.b.31643 ↗
44. Bond Strength and Quality of the Hybrid Layer of One-Step Self-Etch Adhesives Applied with Agitation on Dentin10.2341/09-198-L ↗