journal article·2025-05-27Open access

Impact of a Novel Pretreatment on Bond Strength of Universal Adhesive to Conventional and CAD/CAM Resin Composites: In Vitro Study

Ali A. Elkaffas, Abdullah Alshehri, Feras Alhalabi, Rania Bayoumi, Abdullah Ali Alqahtani, Abdulellah Almudahi, Abdulaziz Fahd Alsubaie, Abdulaziz Fahd Alharbi

Abstract

Novel dentin bonding pretreatment using copper sulfate (CuSO4) and dipotassium hydrogen phosphate (K2HPO4) may create a more hydrophobic environment for dentin bonding. Thus, this study aims to investigate the impact of a CuSO4 + K2HPO4 pretreatment on dentin μTBS when bonded with a universal adhesive to conventional and CAD/CAM resin composites. Eighty recently extracted human molars (n = 80) were chosen and placed in transparent acrylic blocks to expose the crowns entirely. Nano-filled resin composite and CAD/CAM resin blocks were selected. Based on the dentin pretreatment, type of resin composite, and adhesion strategy, the teeth were randomly allocated into eight equal groups (n = 10). The microtensile bond strength (μTBS) and fracture mode were determined. A three-way analysis of variance (ANOVA) was used to analyze the μTBS data, followed by Tukey’s post hoc test. The μTBS values were not significantly affected by either the resin composite type (p > 0.05) or the adhesive strategy (p > 0.05) according to the three-way ANOVA results. Conversely, significant differences were detected between no dentin pretreatment (24.20 ± 4.54 MPa) and CuSO4 + K2HPO4 pretreatment (33.66 ± 5.22 MPa) using an etch-and-rinse adhesive strategy for nano-filled composites (p < 0.001). Additionally, significant differences were detected between no dentin pretreatment (24.71 ± 4.33 MPa) and CuSO4 + K2HPO4 pretreatment (32.49 ± 4.92 MPa) using an etch-and-rinse adhesive strategy for CAD/CAM resin blocks (p < 0.001). Moreover, significant differences were detected between no dentin pretreatment (21.20 ± 3.40 MPa) and CuSO4 + K2HPO4 pretreatment (30.31 ± 3.87 MPa) using a self-etching adhesive strategy for nano-filled composites (p < 0.001). Also, significant differences were detected between no dentin pretreatment (23.89 ± 3.89 MPa) and CuSO4 + K2HPO4 pretreatment (31.22 ± 4.71 MPa) using a self-etching adhesive strategy for CAD/CAM resin blocks (p < 0.001). In conclusion, dentin μTBS was enhanced by a copper-based treatment when used with nano-filled and CAD/CAM resin blocks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Conservative Dental Science Department, College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

Department of Operative Dentistry, Faculty of Dentistry, Mansoura University, Mansoura 35516, Egypt

Biomaterials Department, Faculty of Dental Medicine for Girls, Al-Azhar University, Cairo 11754, Egypt

College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

Funding

Prince Sattam bin Abdulaziz University

References (52)

Show source-provided references
1. Universal dental adhesives: Current status, laboratory testing, and clinical performance10.1002/jbm.b.34305 ↗
2. Bonding Performance of Universal Adhesives: An Updated Systematic Review and Meta-Analysis
3. Shear bond strength of universal adhesives to human enamel and dentin10.1111/jerd.13204 ↗
4. Betancourt, D.E., Baldion, P.A., and Castellanos, J.E. (2019). Resin-Dentin Bonding Interface: Mechanisms of Degradation and Strategies for Stabilization of the Hybrid Layer. Int. J. Biomater., 2019.10.1155/2019/5268342 ↗
5. From dry bonding to water-wet bonding to ethanol-wet bonding. A review of the interactions between dentin matrix and solvated resins using a macromodel of the hybrid layer
6. Effect of Electric Current-assisted Application of Adhesives on their Bond Strength and Quality
7. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
8. Removal of water binding proteins from dentin increases the adhesion strength of low-hydrophilicity dental resins10.1016/j.dental.2020.07.004 ↗
9. Copper, lysyl oxidase, and extracellular matrix protein cross-linking10.1093/ajcn/67.5.996S ↗
10. Surface carboxylation or PEGylation decreases CuO nanoparticles’ cytotoxicity to human cells in vitro without compromising their antibacterial properties10.1007/s00204-020-02720-7 ↗
11. Biosynthesis and wound healing activity of copper nanoparticles10.1049/iet-nbt.2013.0052 ↗
12. Incorporation of bactericidal poly-acrylic acid modified copper iodide particles into adhesive resins10.1016/j.jdent.2015.02.012 ↗
13. Resin composite materials for chairside CAD/CAM restorations: A comparison of selected mechanical properties10.1155/2021/8828954 ↗
14. Grzebieluch, W., Kowalewski, P., Grygier, D., Rutkowska-Gorczyca, M., Kozakiewicz, M., and Jurczyszyn, K. (2021). Printable and machinable dental restorative composites for CAD/CAM application—Comparison of mechanical properties, fractographic, texture and fractal dimension analysis. Materials, 14.10.3390/ma14174919 ↗
15. Aladağ, S., and Ayaz, E.A. (2024). Bonding effectiveness of multi-step adhesive resin cements to CAD/CAM blocks: Impact of thermal cycling and surface treatment methods. BMC Oral Health, 24.10.1186/s12903-024-05091-y ↗
16. Şenol, M., Gürbüz, A., and Oyar, P. (2025). Bond strength of conventional resin-based adhesive cement and self-adhesive resin cement to CAD-CAM restorative materials. BMC Oral Health, 25.10.1186/s12903-025-05527-z ↗
17. Effect of a novel pretreatment on the microtensile bond strength of universal adhesives with dentin10.1016/j.jds.2022.10.029 ↗
18. CONSORT 2010 Statement: Updated guidelines for reporting parallel group randomised trials10.1016/j.jclinepi.2010.02.005 ↗
19. Tribst, J.P.M., Dos Santos, A.F.C., da Cruz Santos, G., da Silva Leite, L.S., Lozada, J.C., Silva-Concílio, L.R., Baroudi, K., and Amaral, M. (2021). Effect of Cement Layer Thickness on the Immediate and Long-Term Bond Strength and Residual Stress between Lithium Disilicate Glass-Ceramic and Human Dentin. Materials, 14.10.3390/ma14185153 ↗
20. The influence of the resin-based cement layer on ceramic-dentin bond strength10.1111/eos.12791 ↗
21. Reconstruction of a demineralized dentin matrix via rapid deposition of CaF2 nanoparticles in situ promotes dentin bonding10.1021/acsami.1c15787 ↗
22. Inhibition of human gelatinases by metals released from dental amalgam10.1016/S0142-9612(00)00388-4 ↗
23. Newly identified interfibrillar collagen crosslinking suppresses cell proliferation and remodelling10.1016/j.biomaterials.2015.03.018 ↗
24. Effects of copper and zinc on the production of homocysteine-induced extracellular matrix metalloproteinase-2 in cultured rat vascular smooth muscle cells10.2143/AC.60.4.2004982 ↗
25. The effect of cavity disinfectants on the sealing ability of dentin bonding system: An in vitro study10.4103/0972-0707.57634 ↗
26. Effect of dissolution of collagen on adhesion to dentin
27. The role of copper nanoparticles in an etch-and-rinse adhesive on antimicrobial activity, mechanical properties and the durability of resin-dentine interfaces10.1016/j.jdent.2017.04.007 ↗
28. 18-month clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A double-blind, randomized controlled trial10.1016/j.jdent.2019.103219 ↗
29. A critical review of the durability of adhesion to tooth tissue: Methods and results10.1177/154405910508400204 ↗
30. The evolution of adhesive dentistry: From etch-and-rinse to universal bonding systems10.1016/j.dental.2024.11.011 ↗
31. State of the art etch-and-rinse adhesives10.1016/j.dental.2010.10.016 ↗
32. Bond strength of universal adhesives: A systematic review and meta-analysis10.1016/j.jdent.2015.04.003 ↗
33. Effect of acid etching on dentin bond strength of ultra-mild self-etch adhesives10.1016/j.ijadhadh.2020.102567 ↗
34. Hardan, L., Bourgi, R., Kharouf, N., Mancino, D., Zrow, M., Jakubowicz, N., Haikel, Y., and Cuevas-Suárez, C.E. (2021). Bond Strength of Universal Adhesives to Dentin: A Systematic Review and Meta-Analysis. Polymers, 13.10.3390/polym13050814 ↗
35. Self-etch adhesive systems: A literature review10.1590/0103-6440201302442 ↗
36. Impact of functional monomers, bioactive particles, and HEMA, on the adhesive performance of self-etch adhesive systems applied to simulated altered dentin10.1016/j.jdent.2024.105379 ↗
37. In vivo and in vitro permeability of one-step self-etch adhesives10.1177/154405910408300605 ↗
38. Bonding performance of universal adhesives in different etching modes10.1016/j.jdent.2014.04.012 ↗
39. Bonding of universal adhesives to dentine–old wine in new bottles?10.1016/j.jdent.2015.03.004 ↗
40. Brkanović, S., Sever, E.K., Vukelja, J., Ivica, A., Miletić, I., and Krmek, S.J. (2023). Comparison of different universal adhesive systems on dentin bond strength. Materials, 16.10.3390/ma16041530 ↗
41. Self-assembled nano-layering at the adhesive interface10.1177/0022034512437375 ↗
42. Chemical Adhesion of Polyalkenoate-based Adhesives to Hydroxyapatite
43. Bourgi, R., Kharouf, N., Cuevas-Suárez, C.E., Lukomska-Szymanska, M., Haikel, Y., and Hardan, L. (2024). A literature review of adhesive systems in dentistry: Key components and their clinical applications. Appl. Sci., 14.10.3390/app14188111 ↗
44. Alomran, W.K., Nizami, M.Z.I., Xu, H.H., and Sun, J. (2025). Evolution of Dental Resin Adhesives—A Comprehensive Review. J. Funct. Biomater., 16.10.3390/jfb16030104 ↗
45. In vitro longevity of bonding properties of universal adhesives to dentin10.2341/14-055-L ↗
46. Adhesion of 10-MDP containing resin cements to dentin with and without the etch-and-rinse technique10.4047/jap.2013.5.3.226 ↗
47. Carrilho, E., Cardoso, M., Marques Ferreira, M., Marto, C.M., Paula, A., and Coelho, A.S. (2019). 10-MDP Based Dental Adhesives: Adhesive Interface Characterization and Adhesive Stability-A Systematic Review. Materials, 12.10.3390/ma12050790 ↗
48. Evaluation of the Bond Strength of Self-Etching Adhesive Systems Containing HEMA and 10-MDP Monomers: Bond Strength of Adhesives Containing HEMA and 10-MDP
49. Microtensile bond strength and failure mode of different universal adhesives on human dentin10.1016/j.identj.2024.04.009 ↗
50. Evaluating the advancements in a recently introduced universal adhesive compared to its predecessor10.1016/j.jds.2023.12.004 ↗
51. Bond strength of adhesive/composite combinations to dentin involving total- and self-etch adhesives
52. Can CAD/CAM resin blocks be considered as substitute for conventional resins?10.1016/j.dental.2017.09.003 ↗