Optimizing Filament-Based TCP Scaffold Design for Osteoconduction and Bone Augmentation: Insights from In Vivo Rabbit Models
Source abstract
Abstract
Additive manufacturing has emerged as a transformative tool in biomedical engineering, offering precise control over scaffold design for bone tissue engineering and regenerative medicine. While much attention has been focused on optimizing pore-based scaffold architectures, filament-based microarchitectures remain relatively understudied, despite the fact that the majority of 3D-printers generate filament-based structures. Here, we investigated the influence of filament characteristics on bone regeneration outcomes using a lithography-based additive manufacturing approach. Three distinct filament-based scaffolds (Fil050, Fil083, and Fil125) identical in macroporosity and transparency, crafted from tri-calcium phosphate (TCP) with varying filament thicknesses and distance, were evaluated in a rabbit model of bone augmentation and non-critical calvarial defect. Additionally, two scaffold types differing in filament directionality (Fil and FilG) were compared to elucidate optimal design parameters. Distance of bone ingrowth and percentage of regenerated area within scaffolds were measured by histomorphometric analysis. Our findings reveal filaments of 0.50 mm as the most effective filament-based scaffold, demonstrating superior bone ingrowth and bony regenerated area compared to larger size filament (i.e., 0.83 mm and 1.25 mm scaffolds). Optimized directionality of filaments can overcome the reduced performance of larger filaments. This study advances our understanding of microarchitecture’s role in bone tissue engineering and holds significant implications for clinical practice, paving the way for the development of highly tailored, patient-specific bone substitutes with enhanced efficacy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Diverse Scientific and Engineering Research · Bayesian Methods and Mixture Models · Advanced Statistical Methods and Models
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center of Dental Medicine, Oral Biotechnology & Bioengineering, University of Zurich, 8032 Zurich, Switzerland
Center for Surgical Research, University Hospital and University of Zurich, 8032 Zurich, Switzerland
Center for Applied Biotechnology and Molecular Medicine (CABMM), University of Zurich, 8032 Zurich, Switzerland
Funding
Swiss National Science Foundation
References (41)
Show source-provided references
1. Yang, Y., Wang, G., Liang, H., Gao, C., Peng, S., Shen, L., and Shuai, C. (2019). Additive Manufacturing of Bone Scaffolds. Int. J. Bioprint, 5.10.18063/ijb.v5i1.148 ↗
2. Additive Manufacturing Techniques for the Production of Tissue Engineering Constructs10.1002/term.1635 ↗
3. Current State of Fabrication Technologies and Materials for Bone Tissue Engineering10.1016/j.actbio.2018.09.031 ↗
4. Additive Manufacturing in Orthopedics: A Review10.1021/acsbiomaterials.1c01072 ↗
5. Guerrero, J., Maevskaia, E., Ghayor, C., Bhattacharya, I., and Weber, F.E. (2023). Influence of Scaffold Microarchitecture on Angiogenesis and Regulation of Cell Differentiation During the Early Phase of Bone Healing: A Transcriptomics and Histological Analysis. Int. J. Mol. Sci., 24.10.3390/ijms24066000 ↗
6. Jain, P., Kathuria, H., and Dubey, N. (2022). Advances in 3d Bioprinting of Tissues/Organs for Regenerative Medicine and in-Vitro Models. Biomaterials, 287.10.1016/j.biomaterials.2022.121639 ↗
7. Reconsidering Osteoconduction in the Era of Additive Manufacturing10.1089/ten.teb.2019.0047 ↗
8. Verykokou, S., Ioannidis, C., Soile, S., Angelopoulos, C., Theodoridis, K., Arampatzis, A.S., Assimopoulou, A.N., Christofilos, D., Kapourani, A., and Pantazos, I. (2024). The Role of Cone Beam Computed Tomography in Periodontology: From 3d Models of Periodontal Defects to 3d-Printed Scaffolds. J. Pers. Med., 14.10.3390/jpm14020207 ↗
9. Additive Manufacturing Pertaining to Bone: Hopes, Reality and Future Challenges for Clinical Applications10.1016/j.actbio.2020.11.039 ↗
10. Advances in Additive Manufacturing for Bone Tissue Engineering Scaffolds10.1016/j.msec.2019.03.037 ↗
11. Additive Manufacturing of Bioceramic Implants for Restoration Bone Engineering: Technologies, Advances, and Future Perspectives10.1021/acsbiomaterials.2c01164 ↗
12. Role of Pore Size and Morphology in Musculo-Skeletal Tissue Regeneration10.1016/j.msec.2015.12.087 ↗
13. Deering, J., and Grandfield, K. (2021). Current Interpretations on the in Vivo Response of Bone to Additively Manufactured Metallic Porous Scaffolds: A Review. Biomater. Biosyst., 2.10.1016/j.bbiosy.2021.100013 ↗
14. Current Understanding of Osteoconduction in Bone Regeneration10.1097/00003086-199810001-00027 ↗
15. Porosity of 3d Biomaterial Scaffolds and Osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
16. Ghayor, C., and Weber, F.E. (2018). Osteoconductive Microarchitecture of Bone Substitutes for Bone Regeneration Revisited. Front. Physiol., 9.10.3389/fphys.2018.00960 ↗
17. Seo, Y.W., Park, J.Y., Lee, D.N., Jin, X., Cha, J.K., Paik, J.W., and Choi, S.H. (2022). Three-Dimensionally Printed Biphasic Calcium Phosphate Blocks with Different Pore Diameters for Regeneration in Rabbit Calvarial Defects. Biomater. Res., 26.10.1186/s40824-022-00271-9 ↗
18. Evaluating the Effect of Pore Size for 3d-Printed Bone Scaffolds10.1016/j.heliyon.2024.e26005 ↗
19. Lin, C., Wang, Y., Huang, Z., Wu, T., Xu, W., Wu, W., and Xu, Z. (2021). Advances in Filament Structure of 3d Bioprinted Biodegradable Bone Repair Scaffolds. Int. J. Bioprint, 7.10.18063/ijb.v7i4.426 ↗
20. Guerrero, J., Ghayor, C., Bhattacharya, I., and Weber, F.E. (2022). Osteoconductivity of Bone Substitutes with Filament-Based Microarchitectures: Influence of Directionality, Filament Dimension, and Distance. Int. J. Bioprint, 9.10.18063/ijb.v9i1.626 ↗
21. Ghayor, C., Chen, T.H., Bhattacharya, I., Ozcan, M., and Weber, F.E. (2020). Microporosities in 3d-Printed Tricalcium-Phosphate-Based Bone Substitutes Enhance Osteoconduction and Affect Osteoclastic Resorption. Int. J. Mol. Sci., 21.10.3390/ijms21239270 ↗
22. Benito-Garzon, L., Guadilla, Y., Diaz-Guemes, I., Valdivia-Gandur, I., Manzanares, M.C., de Castro, A.G., and Padilla, S. (2021). Nanostructured Zn-Substituted Monetite Based Material Induces Higher Bone Regeneration Than Anorganic Bovine Bone and Beta-Tricalcium Phosphate in Vertical Augmentation Model in Rabbit Calvaria. Nanomaterials, 12.10.3390/nano12010143 ↗
23. Manning, S.E., Ku, H.C., Dluzen, D.F., Xing, C., and Zhou, Z. (2023). A Nonparametric Alternative to the Cochran-Armitage Trend Test in Genetic Case-Control Association Studies: The Jonckheere-Terpstra Trend Test. PLoS ONE, 18.10.1371/journal.pone.0280809 ↗
24. Additive Manufacturing in the Biomedical Field-Recent Research Developments10.1016/j.rineng.2022.100661 ↗
25. Embedded Bioprinting for Designer 3d Tissue Constructs with Complex Structural Organization10.1016/j.actbio.2021.11.048 ↗
26. Optimization of Bone Scaffold Porosity Distributions10.1038/s41598-019-44872-2 ↗
27. Lee, J.B., Maeng, W.Y., Koh, Y.H., and Kim, H.E. (2018). Porous Calcium Phosphate Ceramic Scaffolds with Tailored Pore Orientations and Mechanical Properties Using Lithography-Based Ceramic 3d Printing Technique. Materials, 11.10.3390/ma11091711 ↗
28. Bone Defect Animal Models for Testing Efficacy of Bone Substitute Biomaterials10.1016/j.jot.2015.05.002 ↗
29. The Influence of Alendronate on Osseointegration of Nanotreated Dental Implants in New Zealand Rabbits10.1111/j.1600-0501.2011.02189.x ↗
30. Gao, H., Huang, J., Wei, Q., and He, C. (2023). Advances in Animal Models for Studying Bone Fracture Healing. Bioengineering, 10.10.3390/bioengineering10020201 ↗
31. Role of Animal Models in Biomedical Research: A Review10.1186/s42826-022-00128-1 ↗
32. Large Bone Vertical Augmentation Using a Three-Dimensional Printed Tcp/Ha Bone Graft: A Pilot Study in Dog Mandible10.1111/cid.12394 ↗
33. Kim, J.W., Yang, B.E., Hong, S.J., Choi, H.G., Byeon, S.J., Lim, H.K., Chung, S.M., Lee, J.H., and Byun, S.H. (2020). Bone Regeneration Capability of 3d Printed Ceramic Scaffolds. Int. J. Mol. Sci., 21.10.3390/ijms21144837 ↗
34. A 3d Printed Tcp/Ha Structure as a New Osteoconductive Scaffold for Vertical Bone Augmentation10.1111/clr.12503 ↗
35. Hayashi, K., Kishida, R., Tsuchiya, A., and Ishikawa, K. (2023). Effects of Space Dimensionality within Scaffold for Bone Regeneration with Large and Oriented Blood Vessels. Materials, 16.10.3390/ma16247518 ↗
36. Hayashi, K., Munar, M.L., and Ishikawa, K. (2020). Effects of Macropore Size in Carbonate Apatite Honeycomb Scaffolds on Bone Regeneration. Mater. Sci. Eng. C Mater. Biol. Appl., 111.10.1016/j.msec.2020.110848 ↗
37. The Optimal Microarchitecture of 3d-Printed Β-Tcp Bone Substitutes for Vertical Bone Augmentation Differs from That for Osteoconduction10.1016/j.matdes.2021.109650 ↗
38. Optimization of Scaffold Design for Bone Tissue Engineering: A Computational and Experimental Study10.1016/j.medengphy.2014.02.010 ↗
39. Tanvir, M.A.H., Khaleque, M.A., Kim, G.H., Yoo, W.Y., and Kim, Y.Y. (2024). The Role of Bioceramics for Bone Regeneration: History, Mechanisms, and Future Perspectives. Biomimetics, 9.10.20944/preprints202404.0387.v1 ↗
40. Effects of Pore Size on the Osteoconductivity and Mechanical Properties of Calcium Phosphate Cement in a Rabbit Model10.1111/aor.12742 ↗
41. Computational Fluid Dynamic Analysis of Customised 3d-Printed Bone Scaffolds with Different Architectures