journal article·2024-05-27Open access

Effect of Bleaching Agents on Composite Resins with and without Bis-GMA: An In Vitro Study

María Melo, Bianca Dumitrache, James Ghilotti, José Luis Sanz, Carmen Llena

Abstract

The objective was to evaluate the change in color, hardness, and roughness produced by carbamide peroxide (CP) at two different concentrations on two resins. The 16% or 45% CP was applied to 66 resin discs with and without Bis-GMA. The color was measured with a spectrophotometer, and ΔEab and ΔE00 were calculated. Microhardness tester and SEM were used. In both composites, the a* and b* coordinates tended to be red and yellow, respectively, and were significant in the Bis-GMA group (p < 0.05). The ΔEab and ΔE00 were higher in the composite with Bis-GMA, regardless of the treatment received (p < 0.05). The microhardness was reduced in both composites regardless of the PC concentration compared to the control (p < 0.05). The 45% CP reduced the microhardness in the resin group with Bis-GMA compared to 16% CP (p < 0.001) but was not significant in the resin without Bis-GMA (p = 1). An increase in roughness was directly proportional to the concentration of CP, and it was more notable in the composite without Bis-GMA. The composite with Bis-GMA showed a greater tendency to darken than the one without Bis-GMA. The surface hardness of the composite was reduced in both composites and was not influenced by CP concentration in the composite without Bis-GMA. Bleaching is a common procedure nowadays. It is important to know how CP affects composites to establish a prognosis of the treatments in terms of color change, roughness, and hardness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Erosion and Treatment · Dental materials and restorations · Temporomandibular Joint Disorders

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Stomatology, Faculty of Medicine and Dentistry, Universitat de València, Gascó Oliag, 46010 Valencia, Spain

References (37)

Show source-provided references
1. Carbamide peroxide bleaching agents: Effects on surface roughness of enamel, composite and porcelain10.1007/s00784-005-0016-1 ↗
2. Effect of at-home bleaching gels with different thickeners on the physical properties of a composite resin without bisphenol A10.1111/jerd.12908 ↗
3. Influence of Hydrogen Peroxide Bleaching Gels on Color, Opacity, and Fluorescence of Composite Resins10.2341/11-189-L ↗
4. Effect of dental bleaching on the microhardness and surface roughness of sealed composite resins10.5395/rde.2020.45.e12 ↗
5. Direct resin composite restorations for fractured maxillary teeth and diastema closure: A 7 years retrospective evaluation of survival and influencing factors10.1016/j.dental.2017.02.001 ↗
6. Barszczewska-Rybarek, I.M., Chrószcz, M.W., and Chladek, G. (2020). Novel Urethane-Dimethacrylate Monomers and Compositions for Use as Matrices in Dental Restorative Materials. Int. J. Mol. Sci., 21.10.3390/ijms21072644 ↗
7. Bisphenol A and Related Compounds in Dental Materials10.1542/peds.2009-2693 ↗
8. Structure–property relationships in dimethacrylate networks based on Bis-GMA, UDMA and TEGDMA10.1016/j.dental.2009.01.106 ↗
9. Barszczewska-Rybarek, I.M. (2019). A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties. Materials, 12.10.3390/ma12244057 ↗
10. The influence of stratification on color and appearance of resin composites10.1007/s10266-015-0197-2 ↗
11. Optical characteristics of contemporary dental composite resin materials10.1016/j.jdent.2013.07.001 ↗
12. Color Difference Thresholds in Dentistry10.1111/jerd.12149 ↗
13. Neurosensory analysis of tooth sensitivity during at-home dental bleaching: A randomized clinical trial10.1590/1678-7757-2017-0284 ↗
14. (2024, January 24). Official Journal of the European Union, L 283, 29 October 2011. Available online: https://eur-lex.europa.eu/oj/direct-access.html.
15. In-office bleaching with low/medium vs. high concentrate hydrogen peroxide: A systematic review and meta-analysis10.1016/j.jdent.2020.103499 ↗
16. Effects of bleaching gels on the surface microhardness of tooth-colored restorative materials in situ10.1016/j.jdent.2008.01.008 ↗
17. Effect of three bleaching agents on the surface properties of three different esthetic restorative materials10.1016/S0022-3913(03)00105-7 ↗
18. (2016). Dentistry-Guidance on Colour Measurement (Standard No. ISO/TR 28642:2016).
19. Detection of Bisphenol A in dental wastewater after grinding of dental resin composites10.1016/j.dental.2020.04.025 ↗
20. Bisphenol A as degradation product of monomers used in resin-based dental materials10.1016/j.dental.2021.03.005 ↗
21. (2024, April 19). 3M TM Filtek TM Universal Restorative FAQs. Available online: https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xNxtZP82Unv70k17zHvu9lxtD7SSSSSS--.
22. (2024, April 19). Available online: https://multimedia.3m.com/mws/media/1651107O/3m-filtek-universal-restorative-technical-product-profile.pdf.
23. Effects of tooth bleaching protocols assisted by Er,Cr: YSGG and diode (980 nm) lasers on color change of resin-based restoratives10.1111/jerd.12817 ↗
24. Changes in surface roughness and color stability of two composites caused by different bleaching agents10.1590/S0103-64402012000600006 ↗
25. Effects of staining and bleaching on color change of dental composite resins10.1016/j.prosdent.2005.11.019 ↗
26. Susceptibility to discoloration of dental restorative materials containing dimethacrylate resin after bleaching10.1007/s10266-022-00743-3 ↗
27. Influence of Bleaching Agents on Color and Translucency of Aged Resin Composites10.1111/jerd.12261 ↗
28. Effect of 15% carbamide peroxide bleaching gel on color stability of giomer and microfilled composite resin: An in vitro comparison10.4317/medoral.17916 ↗
29. Effects of in-office bleaching agents on polished and unpolished nanofilled resin composite10.1016/j.adaj.2023.04.005 ↗
30. Popescu, A.D., Tuculina, M.J., Diaconu, O.A., Gheorghiță, L.M., Nicolicescu, C., Cumpătă, C.N., Petcu, C., Abdul-Razzak, J., Rîcă, A.M., and Voinea-Georgescu, R. (2023). Effects of Dental Bleaching Agents on the Surface Roughness of Dental Restoration Materials. Medicina, 59.10.3390/medicina59061067 ↗
31. Color stability, Roughness, and Microhardness of Enamel and Composites Submitted to Staining/Bleaching Cycles10.1016/j.sdentj.2020.08.003 ↗
32. Effects of bleaching agents on surface roughness of filling materials10.4012/dmj.2012-217 ↗
33. Effect of bleaching gels on surface roughness of nanofilled composite resins10.1055/s-0039-1698876 ↗
34. Effects of three different bleaching agents on microhardness and roughness of composite sample surfaces finished with different polishing techniques
35. Jaramillo-Cartagena, R., López-Galeano, E.J., Latorre-Correa, F., and Agudelo-Suárez, A.A. (2021). Effect of Polishing Systems on the Surface Roughness of Nano-Hybrid and Nano-Filling Composite Resins: A Systematic Review. Dent. J., 9.10.3390/dj9080095 ↗
36. Effects of different bleaching agent concentrations on surface roughness and microhardness of esthetic restorative materials10.1016/j.sjdr.2015.01.002 ↗
37. The Effect of a 10% Carbamide Peroxide Bleaching Agent on the Microhardness of Four Types of Direct Resin-based Restorative Materials10.2341/12-224-L ↗