journal article·2025-05-09Open access

The Influence of Ca on Mechanical Properties of the Mg–Ca–Zn–RE–Zr Alloy for Orthopedic Applications

Mircea Cătălin Ivănescu, Corneliu Munteanu, Ramona Cimpoeșu, Bogdan Istrate, Fabian Cezar Lupu, Marcelin Benchea, Eusebiu Viorel Șindilar, Alexandru Vlasa, Ovidiu Stamatin, Georgeta Zegan

Abstract

Background: This study examined how the concentration of calcium (Ca) influences the microstructure, mechanical characteristics, and tribological attributes of Mg–Ca–Zn–RE–Zr alloys for orthopedic medicine. Materials and methods: Experimental alloys with 0.1 and 0.5 wt% Ca were prepared in a controlled atmosphere induction furnace. The microstructure of the alloys was investigated by scanning electron microscopy, the chemical composition by X-ray fluorescence and energy-dispersive spectroscopy, the mechanical properties by indentation and scratching, and the corrosion resistance by linear and cyclic potentiometry. Results: The alloy with 0.1% Ca exhibited greater fluctuations in the coefficient of friction, while the sample with 0.5% Ca showed a higher susceptibility to cracking. Regarding corrosion resistance, both samples exhibited a generalized corrosion trend with similar corrosion currents. At lower Ca concentrations (0.1%), the refined microstructure of the alloys provided an elastic modulus closer to that of human bone, minimizing the risk of excessive local stress and promoting uniform load distribution at the bone-implant interface. Conclusion: The 0.5% Ca alloy offered superior tribological stability and better shock absorption, making it suitable for applications requiring long-term stability. The study highlighted the potential of both compositions based on the specific requirements of biodegradable orthopedic implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Dental Medicine, “Grigore T. Popa” University of Medicine and Pharmacy, 16 University Street, 700115 Iasi, Romania

Faculty of Mechanical Engineering, “Gheorghe Asachi” Technical University of Iasi, 43 Dimitrie Mangeron Blvd, 700050 Iasi, Romania

Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iasi, 41 Dimitrie Mangeron Blvd, 700050 Iasi, Romania

Surgery Unit, Clinics Department, Faculty of Veterinary Medicine, Iasi University of Life Sciences, Ion Ionescu de la Brad, 700490 Iasi, Romania

Faculty of Dental Medicine, George Emil Palade University of Medicine, Pharmacy, Science, and Technology, 540139 Târgu-Mureș, Romania

Funding

“Grigore T. Popa” University of Medicine and Pharmacy Iasi, Romania

References (34)

Show source-provided references
1. Current status and outlook on the clinical translation of biodegradable metals10.1016/j.mattod.2018.05.018 ↗
2. Biodegradable magnesium alloys for orthopedic applications: A review on corrosion, biocompatibility and surface modifications10.1016/j.msec.2016.06.020 ↗
3. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
4. Atkinson, H.D., Khan, S., Lashgari, Y., and Ziegler, A. (2019). Hallux valgus correction utilising a modified short scarf osteotomy with a magnesium biodegradable or titanium compression screws—A comparative study of clinical outcomes. BMC Musculoskelet. Disord., 20.10.1186/s12891-019-2717-7 ↗
5. A review on recent advancements in biodegradable Mg-Ca alloys10.1016/j.jma.2022.08.002 ↗
6. A lean magnesium–zinc–calcium alloy ZX00 used for bone fracture stabilization in a large growing-animal model10.1016/j.actbio.2020.06.013 ↗
7. Serum zinc levels and multiple health outcomes: Implications for zinc-based biomaterials
8. Overview of advancement and development trend on magnesium alloy10.1016/j.jma.2019.08.001 ↗
9. Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium-zinc binary alloys10.1016/j.jallcom.2015.06.227 ↗
10. Effect of grain refinement on biodegradation and biomineralization of low calcium containing Mg–Ca alloy10.1088/2053-1591/ab7718 ↗
11. Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys10.1016/j.msec.2012.07.042 ↗
12. A homogenous microstructural Mg-based matrix model for orthopedic application with generating uniform and smooth corrosion product layer in Ringer’s solution: Study on biodegradable behavior of Mg-Zn alloys prepared by powder metallurgy as a case10.1016/j.jma.2020.03.010 ↗
13. Evaluation on the corrosion resistance, antibacterial property and osteogenic activity of biodegradable Mg-Ca and Mg-Ca-Zn-Ag alloys10.1016/j.jma.2021.05.013 ↗
14. Study of Serum and Saliva Biochemical Levels for Copper, Zinc and Copper-Zinc Imbalance in Patients with Oral Cancer and Oral Potentially Malignant Disorders and their Prostetical and DSSS (Disfunctional Syndrome of Stomatognathic System) Treatment
15. Emerging Magnesium-Based Biomaterials for Orthopedic Implantation
16. Sharma, S.K., Saxena, K.K., Malik, V., Mohammed, K.A., Prakash, C., Buddhi, D., and Dixit, S. (2022). Significance of Alloying Elements on the Mechanical Characteristics of Mg-Based Materials for Biomedical Applications. Crystals, 12.10.3390/cryst12081138 ↗
17. Recent developments and applications on high-performance cast magnesium rare-earth alloys10.1016/j.jma.2020.06.021 ↗
18. Magnesium based alloys and composites: Revolutionized biodegradable temporary implants and strategies to enhance their performance10.1016/j.mtla.2023.101680 ↗
19. Biodegradable Mg alloys for orthopedic implants—A review10.1016/j.jma.2021.06.024 ↗
20. Mechanochemical characteristics of Ca-added Mg-based alloys: A multimodality approach10.1016/j.matchar.2020.110475 ↗
21. Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications: A review10.1016/j.jma.2023.04.010 ↗
22. Balasubramani, N., StJohn, D., Dargusch, M., and Wang, G. (2019). Ultrasonic Processing for Structure Refinement: An Overview of Mechanisms and Application of the Interdependence Theory. Materials, 12.10.3390/ma12193187 ↗
23. Researches on the Influence of Thermal Treatment on the Mechanical Properties of Titanium Dental Prostheses10.37358/RC.17.10.5890 ↗
24. Horky, J., Ghaffar, A., Werbach, K., Mingler, B., Pogatscher, S., Schäublin, R., Setman, D., Uggowitzer, P.J., Löffler, J.F., and Zehetbauer, M.J. (2019). Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment. Materials, 12.10.3390/ma12152460 ↗
25. Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys10.1016/j.jma.2022.04.010 ↗
26. Possibilities of improving the mechanical parameters of the dental alloys
27. Cimpoesu, R., Lutcanu, M., Cazac, A.M., Adomnitei, I., Bejinariu, C., Andrusca, L., Prelipceanu, M., Cioca, L.I., Chicet, D.L., and Radu, A.M. (2024). Electrochemical Corrosion Resistance of Al2O3-YSZ Coatings on Steel Substrates. Appl. Sci., 14.10.3390/app142310877 ↗
28. Istrate, B., Munteanu, C., Baltatu, M.S., Cimpoesu, R., and Ioanid, N. (2023). Microstructural and Electrochemical Influence of Zn in MgCaZn Biodegradable Alloys. Materials, 16.10.3390/ma16062487 ↗
29. Panaghie, C., Zegan, G., Sodor, A., Cimpoesu, N., Lohan, N.M., Istrate, B., Roman, A.M., and Ioanid, N. (2023). Analysis of Degradation Products of Biodegradable ZnMgY Alloy. Materials, 16.10.3390/ma16083092 ↗
30. In vitro degradation behavior and cytocompatibility of Mg–Zn–Zr alloys10.1007/s10856-010-4111-8 ↗
31. Preparation of MgO coatings on magnesium alloys for corrosion protection10.1016/j.surfcoat.2010.04.060 ↗
32. Gu, Y., Liu, Y., Bühring, J., Tian, L., Koblenzer, M., Schröder, K.-U., Li, F., Van Dessel, J., Politis, C., and Jahr, H. (2024). Biocompatibility and osteogenic capacity of additively manufactured biodegradable porous WE43 scaffolds: An in vivo study in a canine model. Biomater. Adv., 164.10.1016/j.bioadv.2024.213984 ↗
33. Microstructural and mechanical properties evaluation of Calcium and zinc-modified WE43-based nanocomposites through stir casting for biodegradable applications10.1016/j.ceramint.2024.05.327 ↗
34. Recent advances in magnesium alloys for biomedical applications: A review10.1016/j.mtcomm.2024.111239 ↗