journal article·2025-01-01Open access

Study of the Interplay Among Melt Morphology, Rheology and 3D Printability of Poly(Lactic Acid)/Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) Blends

Marco Costantini, Flavio Cognini, Roberta Angelini, Sara Alfano, Marianna Villano, Andrea Martinelli, David Bolzonella, Marco Rossi, Andrea Barbetta

Abstract

Polymeric materials made from renewable sources that can biodegrade in the environment are attracting considerable attention as substitutes for petroleum-based polymers in many fields, including additive manufacturing and, in particular, Fused Deposition Modelling (FDM). Among the others, poly(hydroxyalkanoates) (PHAs) hold significant potential as candidates for FDM since they meet the sustainability and biodegradability standards mentioned above. However, the most utilised PHA, consisting of the poly(hydroxybutyrate) (PHB) homopolymer, has a high degree of crystallinity and low thermal stability near the melting point. As a result, its application in FDM has not yet attained mainstream adoption. Introducing a monomer with higher excluded volume, such as hydroxyvalerate, in the PHB primary structure, as in poly(hydroxybutyrate-co-valerate) (PHBV) copolymers, reduces the degree of crystallinity and the melting temperature, hence improving the PHA printability. Blending amorphous poly(lactic acid) (PLA) with PHBV enhances further PHA printability via FDM. In this work, we investigated the printability of two blends characterised by different PLA and PHBV weight ratios (25:75 and 50:50), revealing the close connection between blend microstructures, melt rheology and 3D printability. For instance, the relaxation time associated with die swelling upon extrusion determines the diameter of the extruded filament, while the viscoelastic properties the range of extrusion speed available. Through thoroughly screening printing parameters such as deposition speed, nozzle diameter, flow percentage and deposition platform temperature, we determined the optimal printing conditions for the two PLA/PHBV blends. It turned out that the blend with a 50:50 weight ratio could be printed faster and with higher accuracy. Such a conclusion was validated by replicating with remarkable fidelity high-complexity objects, such as a patient’s cancer-affected iliac crest model.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw, Poland

Department of Basic and Applied Sciences for Engineering, Sapienza University of Rome, 00161 Rome, Italy

Institute for Complex Systems, National Research Council (ISC-CNR), Sapienza University of Rome, P.le A. Moro 2, 00185 Rome, Italy

Physics Department, Sapienza University, P.le Aldo Moro 2, 00185 Rome, Italy

Department of Chemistry, Sapienza University of Rome, P.le Aldo Moro 5, 00185 Rome, Italy

Department of Biotechnology, University of Verona, Via Strada Le Grazie 15, 37134 Verona, Italy

Funding

Sapienza University of Rome · Advanced Tomography and Microscopies

References (53)

Show source-provided references
1. A global sustainability perspective on 3D printing technologies10.1016/j.enpol.2014.08.033 ↗
2. Korkki, P. (2012). Beyond 3-D Printers’ Magic, Possible Legal Wrangling, IEA Key World Energy Statistics.
3. 3-D printing: The new industrial revolution10.1016/j.bushor.2011.11.003 ↗
4. Direct digital manufacturing: Definition, evolution, and sustainability implications10.1016/j.jclepro.2015.05.009 ↗
5. Sustainability Characterization for Additive Manufacturing10.6028/jres.119.016 ↗
6. Utilizing in-situ resources and 3D printing structures for a manned Mars mission10.1016/j.actaastro.2014.11.036 ↗
7. Environmental life cycle analysis of distributed three-dimensional printing and conventional manufacturing of polymer products10.1021/sc400093k ↗
8. Additive manufacturing and sustainability: An exploratory study of the advantages and challenges10.1016/j.jclepro.2016.04.150 ↗
9. Research progress in polylactic acid processing for 3D printing10.1016/j.jmapro.2024.01.038 ↗
10. An overview of biodegradable poly (lactic acid) production from fermentative lactic acid for biomedical and bioplastic applications10.1007/s13399-022-02581-3 ↗
11. Song, H.M., Joo, J.C., Lim, S.H., Lim, H.J., Lee, S., and Park, S.J. (2022). Production of polyhydroxyalkanoates containing monomers conferring amorphous and elastomeric properties from renewable resources: Current status and future perspectives. Bioresour. Technol., 366.10.1016/j.biortech.2022.128114 ↗
12. Improving biological production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) co-polymer: A critical review10.1007/s11157-021-09575-z ↗
13. Jin, A., del Valle, L.J., and Puiggalí, J. (2023). Copolymers and Blends Based on 3-Hydroxybutyrate and 3-Hydroxyvalerate Units. Int. J. Mol. Sci., 24.10.3390/ijms242417250 ↗
14. Gregory, D.A., Fricker, A.T.R., Mitrev, P., Ray, M., Asare, E., Sim, D., Larpnimitchai, S., Zhang, Z., Ma, J., and Tetali, S.S.V. (2023). Additive Manufacturing of Polyhydroxyalkanoate-Based Blends Using Fused Deposition Modelling for the Development of Biomedical Devices. J. Funct. Biomater., 14.10.3390/jfb14010040 ↗
15. Naser, A.Z., Deiab, I., Defersha, F., and Yang, S. (2021). Expanding Poly(lactic acid) (PLA) and Polyhydroxyalkanoates (PHAs) Applications: A Review on Modifications and Effects. Polymers, 13.10.3390/polym13234271 ↗
16. Menčík, P., Přikryl, R., Stehnová, I., Melčová, V., Kontárová, S., Figalla, S., Alexy, P., and Bočkaj, J. (2018). Effect of Selected Commercial Plasticizers on Mechanical, Thermal, and Morphological Properties of Poly(3-hydroxybutyrate)/Poly(lactic acid)/Plasticizer Biodegradable Blends for Three-Dimensional (3D) Print. Materials, 11.10.3390/ma11101893 ↗
17. Vigil Fuentes, M.A., Thakur, S., Wu, F., Misra, M., Gregori, S., and Mohanty, A.K. (2020). Study on the 3D printability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(lactic acid) blends with chain extender using fused filament fabrication. Sci. Rep., 10.10.1038/s41598-020-68331-5 ↗
18. Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament10.1016/j.jmapro.2018.11.023 ↗
19. Prediction of Elastic Strains of Polymer Melts in Shear and Elongation10.1122/1.549855 ↗
20. (2023). Standard Test Method for Compressive Properties of Rigid Plastics (Standard No. ASTM D695-15).
21. (2023). The Definitive Guide to Plastic Tensile Testing (Standard No. ASTM D638).
22. Thermal Characterization of Polyhydroxyalkanoates and Poly(lactic acid) Blends Obtained by Injection Molding10.1080/03602559.2014.935422 ↗
23. Microstructural Behaviors of Matrices Based on Polylactic Acid and Polyhydroxyalkanoates10.1021/acs.jafc.8b01506 ↗
24. Morphology and property changes in PLA/PHBV blends as function of blend composition10.1007/s10965-018-1586-3 ↗
25. Films of PLLA/PHBV: Thermal, morphological, and mechanical characterization10.1002/app.11334 ↗
26. Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends10.1016/j.eurpolymj.2012.03.015 ↗
27. A study of morphological, thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing10.1016/j.polymertesting.2013.04.004 ↗
28. Physical aging in PLA through standard DSC and fast scanning calorimetry investigations10.1016/j.tca.2016.12.006 ↗
29. Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler10.1007/s10853-015-8950-z ↗
30. PLA/PHBV Films with Improved Mechanical and Gas Barrier Properties10.1002/mame.201200285 ↗
31. Toughening of poly (lactic acid) by poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with high β-hydroxyvalerate content10.1016/j.eurpolymj.2013.01.016 ↗
32. Properties and structure of polylactide/poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PLA/PHBV) blend fibers10.1016/j.polymer.2015.05.024 ↗
33. Sustainable Immiscible Polylactic Acid (PLA) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Crystallization and Foaming Behavior10.1021/acssuschemeng.3c00199 ↗
34. Blends of polylactide and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with low content of hydroxyvalerate unit: Morphology, structure, and property10.1002/app.42689 ↗
35. Viscoelastic Properties of Immiscible Polymer Blends under Steady and Transient Shear Flows10.1295/polymj.26.1206 ↗
36. Effect of temperature on surface tension and surface dilational rheology of type I collagen10.1016/j.colsurfa.2014.05.025 ↗
37. Effect of Temperature and Pressure on Surface Tension of Polystyrene in Supercritical Carbon Dioxide10.1021/jp065851t ↗
38. Rheology and dynamics of immiscible polymer blends10.1122/1.550551 ↗
39. Comparison of sphere-size distributions obtained from rheology and transmission electron microscopy in PMMA/PS blends10.1122/1.550720 ↗
40. Viscoelastic properties of polystyrene–poly~vinyl methyl ether! blends in oscillatory and steady shear flows near the phase separation temperature10.1002/pi.1994.210340313 ↗
41. Rheological, thermal and structural behavior of poly(e-caprolactone) and nanoclay blended films10.1016/j.jfoodeng.2012.03.014 ↗
42. Criteria for rheological compatibility of polymer blends10.1002/app.1985.070301118 ↗
43. Strategy to improve printability of renewable resource-based engineering plastic tailored for fdm applications10.1021/acsomega.9b02795 ↗
44. (2024, July 02). Die Swell of Complex Polymeric Systems|IntechOpen n.d.. Available online: https://www.intechopen.com/chapters/40741.
45. Die Swell in Molten Polymers10.1122/1.549177 ↗
46. Buckling developed in 3D printed PLA cuboidal samples under compression: Analytical, numerical and experimental investigations
47. Rocha Pereira, T., Patterson, A.E., and Messimer, S.L. (2020). Buckling Strength of 3-D Printed Thermoplastic Thin Shells: Notes on an Exploratory Study of As-Printed and Reinforced Cases. Appl. Sci., 10.10.3390/app10175863 ↗
48. Voxelization modelling based finite element simulation and process parameter optimization for Fused Filament Fabrication10.1016/j.matdes.2019.108409 ↗
49. A model research for prototype warp deformation in the FDM process10.1007/s00170-006-0556-9 ↗
50. Effects of material properties on warpage in fused deposition modeling parts10.1007/s00170-017-1340-8 ↗
51. Morphology and properties of injection molded solid and microcellular polylactic acid/polyhydroxybutyrate-valerate (PLA/PHBV) blends10.1021/ie301573y ↗
52. Bücking, T.M., Hill, E.R., Robertson, J.L., Maneas, E., Plumb, A.A., and Nikitichev, D.I. (2017). From medical imaging data to 3D printed anatomical models. PLoS ONE, 12.10.1371/journal.pone.0178540 ↗
53. Pryadko, A., Surmeneva, M.A., and Surmenev, R.A. (2021). Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications. Polymers, 13.10.3390/polym13111738 ↗