journal article·2024-08-13Open access

Comparative Study of Zirconium Nitride Multilayer Coatings: Crystallinity, In Vitro Oxidation Behaviour and Tribological Properties Deposited via Sputtering and Arc Deposition

Julius C. Dohm, Susann Schmidt, Ana Laura Puente Reyna, Berna Richter, Antonio Santana, Thomas M. Grupp

Abstract

This study aims to evaluate and compare the properties of a biomedical clinically established zirconium nitride (ZrN) multilayer coating prepared using two different techniques: pulsed magnetron sputtering and cathodic arc deposition. The investigation focuses on the crystalline structure, grain size, in-vitro oxidation behaviour and tribological performance of these two coating techniques. Experimental findings demonstrate that the sputter deposition process resulted in a distinct crystalline structure and smaller grain size compared to the arc deposition process. Furthermore, in vitro oxidation caused oxygen to penetrate the surface of the sputtered ZrN top layer to a depth of 700 nm compared to 280 nm in the case of the arc-deposited coating. Finally, tribological testing revealed the improved wear rate of the ZrN multilayer coating applied by sputter deposition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research & Development, Aesculap AG, 78532 Tuttlingen, Germany

Musculoskeletal University Center Munich (MUM), Department of Orthopaedic and Trauma Surgery, Ludwig Maximilians University Munich, Campus Grosshadern, 81377 Munich, Germany

Department of Medical Engineering, IHI Ionbond AG, 4657 Dulliken, Switzerland

References (40)

Show source-provided references
1. Contact sensitization to cobalt–multifactorial analysis of risk factors based on long-term data of the Information Network of Departments of Dermatology10.1111/cod.12284 ↗
2. Metal ion release barrier function and biotribological evaluation of a zirconium nitride multilayer coated knee implant under highly demanding activities wear simulation10.1016/j.jbiomech.2018.07.043 ↗
3. North American Contact Dermatitis Group patch test results: 2009 to 2010
4. Revision surgery after total joint arthroplasty: A complication-based analysis using worldwide arthroplasty registers10.1016/j.arth.2013.01.012 ↗
5. Lymphocyte transformation test reveals low prevalence of true metal hypersensitivity among pre-operative total knee arthroplasty patients10.1007/s00167-022-06951-2 ↗
6. Pseudotumors and High-Grade Aseptic Lymphocyte-Dominated Vasculitis-Associated Lesions Around Total Knee Replacements Identified at Aseptic Revision Surgery: Findings of a Large-Scale Histologic Review10.1016/j.arth.2019.05.025 ↗
7. Total knee arthroplasty-GPs’ views in Germany: A questionnaire-based study10.1007/s00132-008-1221-9 ↗
8. Johansen, J.D., Mahler, V., Lepoittevin, J.-P., and Frosch, P.J. (2019). Hypersensitivity Reactions to Orthopedic Implants. Contact Dermatitis, Springer.10.1007/978-3-319-72451-5 ↗
9. Wear in total knee arthroplasty—Just a question of polyethylene? Metal ion release in total knee arthroplasty10.1007/s00264-013-2162-4 ↗
10. Forte, G., Petrucci, F., and Bocca, B. (2008). Metal Allergens of Growing Significance: Epidemiology, Immunotoxicology, Strategies for Testing and Prevention, Bentham Science Publishers.10.2174/187152808785748146 ↗
11. Mitchelson, A.J., Wilson, C.J., Mihalko, W.M., Grupp, T.M., Manning, B.T., Dennis, D.A., Goodman, S.B., Tzeng, T.H., Vasdev, S., and Saleh, K.J. (2015). Biomaterial hypersensitivity: Is it real? Supportive evidence and approach considerations for metal allergic patients following total knee arthroplasty. BioMed Res. Int., 2015.10.1155/2015/137287 ↗
12. Effects of surface coating on reducing friction and wear of orthopaedic implants10.1088/1468-6996/15/1/014402 ↗
13. Herbster, M., Döring, J., Nohava, J., Lohmann, C.H., Halle, T., and Bertrand, J. (2020). Retrieval study of commercially available knee implant coatings TiN, TiNbN and ZrN on TiAl6V4 and CoCr28Mo6. J. Mech. Behav. Biomed. Mater., 112.10.1016/j.jmbbm.2020.104034 ↗
14. Mechanical, tribological and electrochemical behavior of Zr-based ceramic thin films for dental implants10.1016/j.ceramint.2022.09.176 ↗
15. The in-vivo wear performance of prosthetic femoral heads with titanium nitride coating10.1016/S0142-9612(99)00246-X ↗
16. Influence of Surface Coating on Metal Ion Release: Evaluation in Patients With Metal Allergy10.3928/01477447-20160509-08 ↗
17. A Novel Multilayer-Coating for Total Knee Arthroplasty Implants is Safe—10-Year Results From a Randomized-Controlled Trial10.1016/j.arth.2022.07.014 ↗
18. Blood cytokine pattern and clinical outcome in knee arthroplasty patients: Comparative analysis 5 years after standard versus “hypoallergenic” surface coated prosthesis implantation10.1080/17453674.2018.1518802 ↗
19. Characteristics of different cathodic arc deposition coatings on CoCrMo for biomedical applications10.1016/j.jmbbm.2019.04.026 ↗
20. Analysis of the In Vivo Oxidation and Integrity of a Zirconium Nitride Multilayer Coated Knee Implant and Possible Effect of Oxidation on the Implant-Cement-Bone Interface Fixation Strength
21. ZrN coatings deposited by high power impulse magnetron sputtering and cathodic arc techniques10.1116/1.4869975 ↗
22. Effect of High Ion Irradiation on the Structure, Properties and High Temperature Tribology of Nanoscale CrAlYN/CrN Multilayer Coating Deposited by HIPIMS-HIPIMS Technique10.1002/ppap.200930412 ↗
23. Periarticular metal hypersensitivity complications of hip bearings containing cobalt-chromium10.1530/EOR-22-0036 ↗
24. Hypersensitivity to metals in metal-on-metal hip arthroplasty: A prospective study of one hundred and thirty five lymphocyte transformation tests10.1007/s00264-023-05992-7 ↗
25. (2019). Implants for Surgery—Metallic Materials—Part 12: Wrought Cobalt-Chromium-Molybdenum Alloy (Standard No. ISO 5832-12:2019).
26. (2021). Implants for Surgery—Metallic Materials—Part 3: Wrought Titanium 6-Aluminium 4-Vanadium Alloy (Standard No. ISO 5832-3:2021).
27. Pain in a chromium-allergic patient with total knee arthroplasty: Disappearance of symptoms after revision with a special surface-coated TKA—A case report10.3109/17453674.2011.579521 ↗
28. Bormann, T., Kraenzler, S., Jaeger, S., Kluess, D., Mittelmeier, W., Renkawitz, T., and Kretzer, J.P. (2023). Stability of ceramic coatings on retrieved knee prostheses. J. Mech. Behav. Biomed. Mater., 144.10.1016/j.jmbbm.2023.105997 ↗
29. Structure and properties of ZrN coatings deposited by high power impulse magnetron sputtering technology10.1116/1.3520640 ↗
30. B10 Committee (2021). Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate, ASTM International.
31. B08 Committee (2024). Practice for Preparation of Titanium and Titanium Alloys for Electroplating, ASTM International.
32. Schierjott, R.A., Giurea, A., Neuhaus, H.-J., Schwiesau, J., Pfaff, A.M., Utzschneider, S., Tozzi, G., and Grupp, T.M. (2016). Analysis of Carbon Fiber Reinforced PEEK Hinge Mechanism Articulation Components in a Rotating Hinge Knee Design: A Comparison of In Vitro and Retrieval Findings. BioMed Res. Int., 2016.10.1155/2016/7032830 ↗
33. Very high rate reactive sputtering of TiN, ZrN and HfN10.1016/0040-6090(83)90016-0 ↗
34. Zirconium nitride films prepared by cathodic arc plasma deposition process10.1016/0257-8972(87)90176-9 ↗
35. Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion10.1063/1.2697052 ↗
36. Mechanism and Kinetics of Oxidation of ZrN Ceramics10.1111/jace.13575 ↗
37. Role of ionization fraction on the surface roughness, density, and interface mixing of the films deposited by thermal evaporation, dc magnetron sputtering, and HiPIMS: An atomistic simulation10.1116/1.5094429 ↗
38. Wyckoff, R.W.G. (1963). Crystal Structures—Volume 1, Interscience Publishers.
39. Reactive-sputter-deposited TiN films on glass substrates10.1016/0040-6090(91)90225-M ↗
40. Properties of ZrN films as substrate masks in liquid phase epitaxial lateral overgrowth of compound semiconductors10.1002/crat.200410373 ↗