Formulation Effects on the Mechano-Physical Properties of In Situ-Forming Resilient Hydrogels for Breast Tissue Regeneration
Source abstract
Abstract
The need for a long-term solution for filling the defects created during partial mastectomies due to breast cancer diagnosis has not been met to date. All available defect-filling methods are non-permanent and necessitate repeat procedures. Here, we report on novel injectable porous hydrogel structures based on the natural polymers gelatin and alginate, which are designed to serve for breast reconstruction and regeneration following partial mastectomy. The effects of the formulation parameters on the mechanical and physical properties were thoroughly studied. The modulus in compression and tension were in the range of native breast tissue. Both increased with the increase in the crosslinker concentration and the polymer–air ratio. Resilience was very high, above 93% for most studied formulations, allowing the scaffold to be continuously deformed without changing its shape. The combination of high resilience and low elastic modulus is favored for adipose tissue regeneration. The physical properties of gelation time and water uptake are controllable and are affected mainly by the alginate and N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (EDC) concentrations and less by the polymer–air ratio. In vitro cell viability tests were performed on mouse preadipocytes and indicated high biocompatibility. The minimally invasive nature of this approach, along with the excellent properties of the scaffold, will enable the filling of complex voids while simultaneously decreasing surgical costs and greatly improving patient well-being.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Hydrogels: synthesis, properties, applications · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Biomedical Engineering, Faculty of Engineering, Tel-Aviv University, Tel-Aviv 69978, Israel
References (36)
Show source-provided references
1. Cleversey, C., Robinson, M., and Willerth, S.M. (2019). 3D printing breast tissue models: A review of past work and directions for future work. Micromachines, 10.10.3390/mi10080501 ↗
2. Soft tissue fillers for adipose tissue regeneration: From hydrogel development toward clinical applications10.1016/j.actbio.2017.09.026 ↗
3. Biomechanical Principles of Breast Implants and Current State of Research in Soft Tissue Engineering for Cosmetic Breast Augmentation10.1007/s00266-021-02559-y ↗
4. Hydrogels in adipose tissue engineering—Potential application in post-mastectomy breast regeneration10.1002/term.2753 ↗
5. Biomaterials & scaffolds for tissue engineering10.1016/S1369-7021(11)70058-X ↗
6. Mechanics of the normal woman’s breast10.3233/THC-2007-15404 ↗
7. Li, X., Chen, S., Li, J., Wang, X., Zhang, J., Kawazoe, N., and Chen, G. (2016). 3D culture of chondrocytes in gelatin hydrogels with different stiffness. Polymers, 8.10.3390/polym8080269 ↗
8. Mechanical biocompatibility of highly deformable biomedical materials10.1016/j.jmbbm.2015.03.023 ↗
9. The role of mechanics in biological and bio-inspired systems10.1038/ncomms8418 ↗
10. Stimulation of adipogenesis of adult adipose-derived stem cells using substrates that mimic the stiffness of adipose tissue10.1016/j.biomaterials.2013.07.103 ↗
11. The mechanical properties of human adipose tissues and their relationships to the structure and composition of the extracellular matrix10.1152/ajpendo.00111.2013 ↗
12. Kayabolen, A., Keskin, D., Aykan, A., Karslioglu, Y., Zor, F., and Tezcaner, A. (2017). Native extracellular matrix/fibroin hydrogels for adipose tissue engineering with enhanced vascularization. Biomed. Mater., 12.10.1088/1748-605X/aa6a63 ↗
13. Extracellular-matrix tethering regulates stem-cell fate10.1038/nmat3339 ↗
14. Breast Reconstruction with a Tissue Engineering and Regenerative Medicine Approach (Systematic Review)10.1007/s10439-019-02373-3 ↗
15. How deeply cells feel: Methods for thin gels10.1088/0953-8984/22/19/194116 ↗
16. Biomaterials Developments for Brain Tissue Engineering10.1007/978-981-13-0950-2_17 ↗
17. Conformation-driven strategy for resilient and functional protein materials10.1073/pnas.2115523119 ↗
18. Healing of skin wounds with a chitosan-gelatin sponge loaded with tannins and platelet-rich plasma10.1016/j.ijbiomac.2015.11.009 ↗
19. Cell proliferation on three-dimensional chitosan-agarose-gelatin cryogel scaffolds for tissue engineering applications10.1016/j.jbiosc.2012.07.005 ↗
20. Three-Dimensional Porous Scaffolds with Biomimetic Microarchitecture and Bioactivity for Cartilage Tissue Engineering10.1021/acsami.9b12206 ↗
21. Li, S., Poche, J.N., Liu, Y., Scherr, T., McCann, J., Forghani, A., Smoak, M., Muir, M., Berntsen, L., and Chen, C. (2018). Hybrid Synthetic-Biological Hydrogel System for Adipose Tissue Regeneration. Macromol. Biosci., 18.10.1002/mabi.201800122 ↗
22. Extrusion-based 3D printing of photo-crosslinkable gelatin and κ-carrageenan hydrogel blends for adipose tissue regeneration10.1016/j.ijbiomac.2019.08.124 ↗
23. Lee, S., Lee, H.S., Chung, J.J., Kim, S.H., Park, J.W., Lee, K., and Jung, Y. (2021). Enhanced regeneration of vascularized adipose tissue with dual 3D-printed elastic polymer/dECM hydrogel complex. Int. J. Mol. Sci., 22.10.3390/ijms22062886 ↗
24. Natural and synthetic biodegradable polymers: Different scaffolds for cell expansion and tissue formation10.5301/ijao.5000307 ↗
25. Alginate: Properties and biomedical applications10.1016/j.progpolymsci.2011.06.003 ↗
26. Cross-linking and characterisation of gelatin matrices for biomedical applications10.1163/156856200743670 ↗
27. Rigidity of two-component hydrogels prepared from alginate and poly(ethylene glycol)-diamines10.1021/ma990514m ↗
28. Crosslinking structures of gelatin hydrogels crosslinked with genipin or a water-soluble carbodiimide10.1002/app.13563 ↗
29. (2012). Biological Evaluation of Medical Devices (Standard No. ISO 10993:2012).
30. Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting10.1016/j.jmbbm.2017.12.018 ↗
31. Giladi, S. (2021). Structure and Biological Properties of Catheter Injectable Hydrogels for Tissue Regeneration Applications. [Master’s Thesis, Materials Science and Engineering Department, Faculty of Engineering, Tel Aviv University].
32. Simulation of the bioadhesive gelatin-alginate conjugate loaded with antibiotic drugs10.1002/pat.4487 ↗
33. Features of the volume change and a new constitutive equation of hydrogels under uniaxial compression10.1016/j.jmbbm.2018.06.004 ↗
34. Drozdov, A.D., and de C. Christiansen, J. (2020). Tension–compression asymmetry in the mechanical response of hydrogels. J. Mech. Behav. Biomed. Mater., 110.10.1016/j.jmbbm.2020.103851 ↗
35. Injectable metronidazole-eluting gelatin-alginate hydrogels for local treatment of periodontitis10.1177/08853282221079458 ↗
36. Preparation and in vitro characterization of cross-linked collagen–gelatin hydrogel using EDC/NHS for corneal tissue engineering applications10.1016/j.ijbiomac.2018.12.125 ↗