journal article·2024-03-14Open access

Bonding Pretreatment of Aesthetic Dental CAD-CAM Materials through Surface Etching with a Mixed Aqueous Solution of Ammonium Fluoride and Ammonium Hydrogen Sulfate

Yusaku Nishizawa, Tatsuo Kawamoto, Hiroshi Ikeda

Abstract

Hydrofluoric acid (HF) is commonly used as an etchant for the pretreatment of dental computer-aided design/computer-aided manufacturing (CAD-CAM) materials, such as glass-ceramics and resin composites. Despite its effectiveness, the harmful and hazardous nature of HF has raised significant safety concerns. In contrast, ammonium fluoride (AF) is known for its relatively low toxicity but has limited etching capability. This study explored the potential of ammonium hydrogen sulfate (AHS), a low-toxicity and weak acid, to enhance the etching ability of aqueous AF solutions for the bonding pretreatment of CAD-CAM materials. This study investigated five types of aesthetic CAD-CAM materials: lithium disilicate glass, feldspathic porcelain, polymer-infiltrated ceramic networks, resin composites, and zirconia. Seven experimental etchants were prepared by varying the amount of AHS added to aqueous AF solutions, with each etchant used to etch the surfaces of the respective CAD-CAM materials. The treated surfaces were analyzed using scanning electron microscopy and confocal laser scanning microscopy. Additionally, the shear bond strength (SBS) of the CAD-CAM materials treated with a luting agent (resin cement) was evaluated. The results indicated that the AF1/AHS3 (weight ratio AF:AHS = 1:3) etchant had the most substantial etching effect on the surfaces of silica-containing materials (lithium disilicate glass, feldspathic porcelain, polymer-infiltrated ceramic networks, and resin composites) but not on zirconia. The SBS of the materials treated with the AF1/AHS3 etchant was comparable to that of the commercial HF etchant. Hence, an AF/AHS mixed solution could effectively etch silica-containing CAD-CAM materials, thereby enhancing their bonding capabilities.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Biomaterials, Department of Oral Functions, Kyushu Dental University, Kitakyushu 803-8580, Japan

Division of Orofacial Functions and Orthodontics, Department of Health Improvement, Kyushu Dental University, Kitakyushu 803-8580, Japan

Funding

JSPS KAKENHI

References (48)

Show source-provided references
1. Advancements in CAD/CAM technology: Options for practical implementation10.1016/j.jpor.2016.01.003 ↗
2. Contemporary Evidence of CAD-CAM in Dentistry: A Systematic Review
3. Skorulska, A., Piszko, P., Rybak, Z., Szymonowicz, M., and Dobrzynski, M. (2021). Review on polymer, ceramic and composite materials for CAD/CAM indirect restorations in dentistry-application, mechanical characteristics and comparison. Materials, 14.10.3390/ma14071592 ↗
4. Rexhepi, I., Santilli, M., D’Addazio, G., Tafuri, G., Manciocchi, E., Caputi, S., and Sinjari, B. (2023). Clinical applications and mechanical properties of CAD-CAM materials in restorative and prosthetic dentistry: A systematic review. J. Funct. Biomater., 14.10.20944/preprints202307.1226.v1 ↗
5. CAD/CAM ceramic restorative materials for natural teeth10.1177/0022034518779759 ↗
6. Zirconia restoration types, properties, tooth preparation design, and bonding. A narrative review10.1111/jerd.13151 ↗
7. Marchesi, G., Camurri Piloni, A., Nicolin, V., Turco, G., and Di Lenarda, R. (2021). Chairside CAD/CAM materials: Current trends of clinical uses. Biology, 10.10.3390/biology10111170 ↗
8. Current status and perspective of CAD/CAM-produced resin composite crowns: A review of clinical effectiveness10.1016/j.jdsr.2020.10.002 ↗
9. Laborie, M., Naveau, A., and Menard, A. (2022). CAD-CAM resin-ceramic material wear: A systematic review. J. Prosthet. Dent., in press.10.1016/j.prosdent.2022.01.027 ↗
10. From artisanal to CAD-CAM blocks: State of the art of indirect composites10.1177/0022034516634286 ↗
11. A literature review on the new polymer-infiltrated ceramic-network material (PICN)10.1111/jerd.12370 ↗
12. Amesti-Garaizabal, A., Agustin-Panadero, R., Verdejo-Sola, B., Fons-Font, A., Fernandez-Estevan, L., Montiel-Company, J., and Sola-Ruiz, M.F. (2019). Fracture Resistance of Partial Indirect Restorations Made With CAD/CAM Technology. A Systematic Review and Meta-analysis. J. Clin. Med., 8.10.3390/jcm8111932 ↗
13. Al-Haj Husain, N., Ozcan, M., Molinero-Mourelle, P., and Joda, T. (2020). Clinical Performance of Partial and Full-Coverage Fixed Dental Restorations Fabricated from Hybrid Polymer and Ceramic CAD/CAM Materials: A Systematic Review and Meta-Analysis. J. Clin. Med., 9.10.3390/jcm9072107 ↗
14. The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems10.1016/j.prosdent.2005.02.012 ↗
15. Effect of sandblasting, etching and resin bonding on the flexural strength/bonding of novel glass-ceramics10.1016/j.dental.2018.07.001 ↗
16. A review of defects in vat photopolymerization additive-manufactured ceramics: Characterization, control, and challenges10.1016/j.jeurceramsoc.2023.10.067 ↗
17. Aspects of bonding between resin luting cements and glass ceramic materials10.1016/j.dental.2014.01.017 ↗
18. Effect of Nonthermal Plasma on Shear Bond Strength of Translucent Zirconia in Layering Ceramic10.1155/2023/6639030 ↗
19. Wu, X., Liu, K., Luo, R., Xu, J., and Chen, M. (2023). Atmospheric plasma treatment: An alternative of HF etching in lithium disilicate glass-ceramic cementation. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1259707 ↗
20. Turunc Oguzman, R., and Sismanoglu, S. (2023). Adhesive Performance of Resin Cement to Glass-Ceramic and Polymer-Based Ceramic CAD/CAM Materials after Applying Self-Etching Ceramic Primer or Different Surface Treatments. Materials, 17.10.3390/ma17010002 ↗
21. Alao, A.R. (2024). Optimization of surface roughness, phase transformation and shear bond strength in sandblasting process of YTZP using statistical machine learning. J. Mech. Behav. Biomed. Mater., 150.10.1016/j.jmbbm.2023.106245 ↗
22. The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia10.1007/s00784-021-04323-7 ↗
23. Shear bond strength between standard or modified zirconia surfaces and two resin cements incorporating or not 10-MDP in their matrix10.1016/j.dental.2023.12.015 ↗
24. Nascimento, V.A., Bento, V.A.A., Cruz, K.H., Rosa, C., Pesqueira, A.A., and Pellizzer, E.P. (2023). Evaluation of bond strength of glass and resin-ceramics with laser phototherapy: A systematic review and meta-analysis of in vitro studies. J. Prosthet. Dent., in press.10.1016/j.prosdent.2023.02.004 ↗
25. Surface modification of zirconia or lithium disilicate-reinforced glass ceramic by laser texturing to increase the adhesion of prosthetic surfaces to resin cements: An integrative review10.1007/s00784-023-05016-z ↗
26. Effect of hydrofluoric acid concentration and etching time on bond strength to lithium disilicate glass ceramic10.2341/16-215-L ↗
27. Lima, R.B.W., Muniz, I.A.F., Campos, D.E.S., Murillo-Gomez, F., Andrade, A.K.M., Duarte, R.M., and de Souza, G.M. (2022). Effect of universal adhesives and self-etch ceramic primers on bond strength to glass ceramics: A systematic review and meta-analysis of in vitro studies. J. Prosthet. Dent., in press.
28. Which surface treatment promotes higher bond strength for the repair of resin nanoceramics and polymer-infiltrated ceramics? A systematic review and meta-analysis10.1016/j.prosdent.2020.06.009 ↗
29. Effect of Hydrofluoric Acid Concentration on Bond Strength to Glass-Ceramics: A Systematic Review and Meta-Analysis of In-Vitro Studies
30. Effect of surface treatment on roughness and bond strength of a heat-pressed ceramic10.1016/S0022-3913(08)60028-1 ↗
31. Does acid etching morphologically and chemically affect lithium disilicate glass ceramic surfaces?
32. Influence of the thickening agent contained in a phosphoric acid etchant on bonding between feldspar porcelain and resin cement with a silane coupling agent10.4012/dmj.2022-176 ↗
33. Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance10.1016/j.jpor.2017.06.002 ↗
34. Effect of prolonged application of single-step self-etching primer and hydrofluoric acid on the surface roughness and shear bond strength of CAD/CAM materials10.1111/eos.12747 ↗
35. The impact of different surface treatments on topography and bond strength of resin cement to lithium disilicate glass ceramic10.2341/21-130-L ↗
36. Nishizawa, Y., Komagata, Y., Nagamatsu, Y., Kawamoto, T., and Ikeda, H. (2024). Chemical etching of CAD-CAM glass-ceramic-based materials using fluoride solutions for bonding pretreatment. Dent. Mater. J., accepted.10.4012/dmj.2023-333 ↗
37. Effect of etchant variability on shear bond strength of all ceramic restorations—An in vitro study10.1007/s13191-011-0064-y ↗
38. Effect of etching with potassium hydrogen difluoride and ammonium hydrogen difluoride on bonding of a tri-n-butylborane initiated resin to zirconia10.4012/dmj.2018-152 ↗
39. Additive-Driven Dissolution Enhancement of Colloidal Silica. 3. Fluorine-Containing Additives10.1021/ie202806m ↗
40. Yano, H.T., Ikeda, H., Nagamatsu, Y., Masaki, C., Hosokawa, R., and Shimizu, H. (2020). Correlation between microstructure of CAD/CAM composites and the silanization effect on adhesive bonding. J. Mech. Behav. Biomed. Mater., 101.10.1016/j.jmbbm.2019.103441 ↗
41. Wet chemical etching of silicate glasses in hydrofluoric acid based solutions10.1007/BF01352182 ↗
42. Etching mechanism of vitreous silicon dioxide in HF-based solutions10.1021/ja993803z ↗
43. A study of the dissolution of SiO2 in acidic fluoride solutions10.1149/1.2407835 ↗
44. The etching mechanisms of SiO2 in hydrofluoric acid10.1149/1.2059243 ↗
45. Adhesion to zirconia used for dental restorations: A systematic review and meta-analysis
46. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
47. Chemical interaction mechanism of 10-MDP with zirconia10.1038/srep45563 ↗
48. The effects of varied etching time and etching solution viscosity on bond strength and enamel morphology