Effect of Various Beverages on Adhesion of Repaired CAD/CAM Restorative Materials
Source abstract
Abstract
(1) Background: The purpose of this study was to determine the effect of commonly consumed beverages on the bond strength of three different computer-aided design-computer-aided manufacturing (CAD/CAM) resin–ceramic hybrid materials repaired with resin-based composite (RBC) materials. (2) Materials and Methods: Rectangular prism specimens (N = 138) measuring 6 mm × 5 mm × 2 mm were obtained from GC Cerasmart (GC), Lava Ultimate (LU), and Vita Enamic (VE) blocks. These blocks were polished and then subjected to thermal cycling (10,000 cycles, 5 °C to 55 °C). After the surface treatment was applied, the average surface roughness value was measured. All the surfaces were repaired with RBC. Thermal cycling was performed for the second time. Each group was then distributed into three subgroups according to the beverage used: tea (t), cola (c), and distilled water (0) (n = 15). The specimens were stored in these solutions for 28 days and then subjected to the shear bond strength (SBS) test. Statistical analysis was performed using a two-way ANOVA test with Bonferroni adjustment. (3) Results: The surface roughness of the materials presented no significant difference after different surface treatments (p > 0.05). No significant difference was observed among the materials (p > 0.05). Tea and cola presented similar SBS values (p > 0.05). Both were significantly lower than distilled water (p < 0.001, p < 0.001, respectively). (4) Conclusions: Consumption of beverages reduces the bond strength in surfaces repaired with RBC to CAD/CAM resin–ceramic hybrid materials. (5) Clinical Significance: Repairing damaged resin matrix dental restorations with RBC is advantageous in terms of time and cost by achieving adequate bond strengths. Frequently consumed beverages reduce the bond strength of repaired CAD/CAM resin–ceramic hybrid materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, Faculty of Dentistry, University of Karabük, Karabük 78050, Türkiye
Department of Prosthodontics, Faculty of Dentistry, Lokman Hekim University, Ankara 06510, Türkiye
Department of Endodontics, Faculty of Dentistry, Istanbul Medipol University, Istanbul 34083, Türkiye
Clinic of Masticatory Disorders and Dental Biomaterials, Center of Dental Medicine, University of Zurich, CH-8032 Zurich, Switzerland
Funding
GC, Türkiye
References (54)
Show source-provided references
1. Effect of Different Surface Treatment Methods on Micro-Shear Bond Strength of CAD-CAM Restorative Materials to Resin Cement10.1080/01694243.2018.1514992 ↗
2. Effect of surface treatments and universal adhesive application on the microshear bond strength of CAD/CAM materials10.4047/jap.2020.12.1.22 ↗
3. Acid etching as surface treatment method for luting of glass-ceramic restorations, part 1: Acids, application protocol and etching effectiveness10.3889/oamjms.2018.147 ↗
4. Wear resistance and abrasiveness of CAD-CAM monolithic materials10.1016/j.prosdent.2018.05.011 ↗
5. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness10.1016/j.jmbbm.2013.01.003 ↗
6. Effect of the composition of CAD/CAM composite blocks on mechanical properties10.1155/2018/4893143 ↗
7. Clinical performance of a new biomimetic double network material10.2174/1874210620130904003 ↗
8. A novel polymer infiltrated ceramic dental material10.1016/j.dental.2011.02.002 ↗
9. (2023, May 31). GC Cerasmart Product Description. Available online: https://www.gc.dental/america/products/digital/cadcam/cerasmart.
10. (2023, May 31). Vita Enamic Technical and Scientific Documentation. Available online: https://www.vita-zahnfabrik.com/en/VITA-ENAMIC-24970,27568.html.
11. (2023, May 31). Lava Ultimate CAD/CAM Restorative Technical Product Profile. Available online: https://www.3m.com/3M/en_US/p/d/b00008161/.
12. Performance of dental ceramics: Challenges for improvements10.1177/0022034510391795 ↗
13. Intraoral treatment of veneering porcelain chipping of fixed dental restorations: A review and clinical application10.14219/jada.archive.2013.0011 ↗
14. Microtensile bond strengths of adhesively bonded polymer-based CAD/CAM materials to dentin10.4012/dmj.2017-442 ↗
15. Adhesive bonding to polymer infiltrated ceramic10.4012/dmj.2015-271 ↗
16. Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements10.1016/S0022-3913(12)60031-6 ↗
17. Szalewski, L., Wójcik, D., Bogucki, M., Szkutnik, J., and Różyło-Kalinowska, I. (2021). The influence of popular beverages on mechanical properties of composite resins. Materials, 14.10.3390/ma14113097 ↗
18. Erosive effects of different acids on bovine enamel: Release of calcium and phosphate in vitro10.1016/j.archoralbio.2004.11.002 ↗
19. Evaluation of the repair capacities and color stabilities of a resin nanoceramic and hybrid CAD/CAM blocks10.4047/jap.2020.12.3.140 ↗
20. Color stability of CAD/CAM materials with colored beverages thermocycling10.5455/annalsmedres.2019.08.506 ↗
21. Effect of polishing technique and immersion in beverages on color stability of nanoceramic composites10.1016/j.jobcr.2020.11.011 ↗
22. Investigating the color changes on resin-based CAD/CAM Blocks10.1111/jerd.12561 ↗
23. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials10.4047/jap.2016.8.4.259 ↗
24. Effect of different surface treatment techniques on the repair strength of indirect composites10.1016/j.jdent.2017.01.010 ↗
25. The effect of surface treatments on the bond strength between CAD/CAM blocks and composite resin10.1111/jopr.12322 ↗
26. Comparative approach to analyse the effects of different surface treatments on CAD/CAM resin nanoceramics–resin composite repair bond strength10.1080/13102818.2017.1392260 ↗
27. Bond strength durability of a resin composite on a reinforced ceramic using various repair systems10.1016/j.dental.2009.06.020 ↗
28. Influence of different surface treatments on microshear bond strength of repair resin composite to two CAD/CAM esthetic restorative materials10.1016/j.tdj.2015.06.001 ↗
29. Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network10.4317/jced.52521 ↗
30. Machinability of CAD-CAM materials10.1016/j.prosdent.2016.09.022 ↗
31. Microtensile bond strength of composite-to-composite repair with different surface treatments and adhesive systems10.1080/01694243.2014.896069 ↗
32. Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material10.1007/s10266-014-0188-8 ↗
33. Wendler, M., Belli, R., Panzer, R., Skibbe, D., Petschelt, A., and Lohbauer, U. (2016). Repair bond strength of aged resin composite after different surface and bonding treatments. Materials, 9.10.3390/ma9070547 ↗
34. Bond strength of luting cements to zirconium oxide ceramics
35. Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systems10.4012/dmj.2014-159 ↗
36. Shear bond strength of repair systems to new CAD/CAM restorative materials10.1111/jopr.12564 ↗
37. Resin composite repair for implant-supported crowns10.1002/jbm.b.33683 ↗
38. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: The effect of surface treatments
39. Effect of surface conditioning methods on the bond strength of luting cement to ceramics10.1016/S0109-5641(03)00019-8 ↗
40. Which surface treatment promotes higher bond strength for the repair of resin nanoceramics and polymer-infiltrated ceramics? A systematic review and meta-analysis10.1016/j.prosdent.2020.06.009 ↗
41. Surface conditioning protocol for the adhesion of resin-based materials to glassy matrix ceramics: How to condition and why
42. Surface roughness of ceramic-resin composites after femtosecond laser irradiation, sandblasting or acid etching and their bond strength with and without silanization to a resin cement10.2341/17-391-L ↗
43. A simple method to protect patient and environment when using sandblasting for intraoral repair
44. The consumption of tea and coffee in Turkey and emerging new trends10.1186/s42779-022-00124-9 ↗
45. Responsible sourcing practices in Turkey, the case of food and beverage industry
46. Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems10.4047/jap.2020.12.3.131 ↗
47. Effect of universal adhesives and surface treatments on shear bond strength to hybrid CAD/CAM ceramics
48. Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials10.1111/ijac.13653 ↗
49. Effect of different repair methods on the bond strength of resin composite to CAD/CAM materials and microorganisms adhesion: An in situ study10.1016/j.jdent.2019.103266 ↗
50. Influence of pretreatment methods on the adhesion of composite and polymer infiltrated ceramic cad-cam blocks
51. Colombo, M., Poggio, C., Lasagna, A., Chiesa, M., and Scribante, A. (2019). Vickers micro-hardness of new restorative CAD/CAM dental materials: Evaluation and comparison after exposure to acidic drink. Materials, 12.10.3390/ma12081246 ↗
52. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin10.1016/j.prosdent.2006.03.016 ↗
53. Validity of bond strength tests: A critical review-Part II10.4103/0972-0707.139823 ↗
54. Aspects of bonding between resin luting cements and glass ceramic materials10.1016/j.dental.2014.01.017 ↗