journal article·2023-06-01Open access

Employing Indirect Adenosine 2A Receptors (A2AR) to Enhance Osseointegration of Titanium Devices: A Pre-Clinical Study

Maria Jesus Pacheco-Vergara, Ernesto Byron Benalcázar-Jalkh, Vasudev V. Nayak, Edmara T. P. Bergamo, Bruce Cronstein, André Luis Zétola, Fernando Pessoa Weiss, João Ricardo Almeida Grossi, Tatiana Miranda Deliberador, Paulo G. Coelho, Lukasz Witek

Abstract

The present study aimed to evaluate the effect of dipyridamole, an indirect adenosine 2A receptors (A2AR), on the osseointegration of titanium implants in a large, translational pre-clinical model. Sixty tapered, acid-etched titanium implants, treated with four different coatings ((i) Type I Bovine Collagen (control), (ii) 10 μM dipyridamole (DIPY), (iii) 100 μM DIPY, and (iv) 1000 μM DIPY), were inserted in the vertebral bodies of 15 female sheep (weight ~65 kg). Qualitative and quantitative analysis were performed after 3, 6, and 12 weeks in vivo to assess histological features, and percentages of bone-to-implant contact (%BIC) and bone area fraction occupancy (%BAFO). Data was analyzed using a general linear mixed model analysis with time in vivo and coating as fixed factors. Histomorphometric analysis after 3 weeks in vivo revealed higher BIC for DIPY coated implant groups (10 μM (30.42% ± 10.62), 100 μM (36.41% ± 10.62), and 1000 μM (32.46% ± 10.62)) in comparison to the control group (17.99% ± 5.82). Further, significantly higher BAFO was observed for implants augmented with 1000 μM of DIPY (43.84% ± 9.97) compared to the control group (31.89% ± 5.46). At 6 and 12 weeks, no significant differences were observed among groups. Histological analysis evidenced similar osseointegration features and an intramembranous-type healing pattern for all groups. Qualitative observation corroborated the increased presence of woven bone formation in intimate contact with the surface of the implant and within the threads at 3 weeks with increased concentrations of DIPY. Coating the implant surface with dipyridamole yielded a favorable effect with regard to BIC and BAFO at 3 weeks in vivo. These findings suggest a positive effect of DIPY on the early stages of osseointegration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Craniofacial Molecular Biology, Herman Ostrow School of Dentistry, University of Southern California, Los Angeles, CA 90089, USA

Department of Prosthodontic and Periodontology, Bauru School of Dentistry, University of Sao Paulo, Bauru 17012-901, SP, Brazil

Department of Biochemistry and Molecular Biology, University of Miami Miller School of Medicine, Miami, FL 33136, USA

Division of Biomaterials, New York University College of Dentistry, 345 E 24th St., Room 902D, New York, NY 10010, USA

Department of Medicine, New York University Langone Medical Center, New York, NY 10016, USA

Oral and Maxillofacial Surgeon, Chairman of Implantology, SOEPAR, Curitiba 80730-000, PR, Brazil

Faculdade Evangélica do Paraná (FEPAR), Curitiba 80730-000, PR, Brazil

School of Health Science, Universidade Positivo, Curitiba 80740-050, PR, Brazil

Latin American Institute of Dental Research and Education—ILAPEO, Curitiba 80710-150, PR, Brazil

Division of Plastic Surgery, Department of Surgery, University of Miami Miller School of Medicine, Miami, FL 33136, USA

Department of Biomedical Engineering, New York University Tandon School of Engineering, Brooklyn, NY 11201, USA

References (55)

Show source-provided references
1. The risk factors of early implant failure: A retrospective study of 6113 implants10.1111/cid.12992 ↗
2. Potential risk factors for early and late dental implant failure: A retrospective clinical study on 9080 implants10.1186/s40729-020-00276-w ↗
3. Bone Quality and Quantity and Dental Implant Failure: A Systematic Review and Meta-analysis10.11607/ijp.5142 ↗
4. Longevity of dental implants in type IV bone: A systematic review10.1016/j.ijom.2014.02.016 ↗
5. Does bone mineral density influence the primary stability of dental implants? A systematic review10.1111/j.1600-0501.2011.02228.x ↗
6. Primary stability, insertion torque and bone density of cylindric implant ad modum Branemark: Is there a relationship? An in vitro study10.1111/j.1600-0501.2010.02036.x ↗
7. The Influence of Nanostructured Hydroxyapatite Surface in the Early Stages of Osseointegration: A Multiparameter Animal Study in Low-Density Bone10.2147/IJN.S280957 ↗
8. Osseointegration and its experimental background10.1016/S0022-3913(83)80101-2 ↗
9. Modern implant dentistry based on osseointegration: 50 years of progress, current trends and open questions10.1111/prd.12185 ↗
10. Biomaterial and biomechanical considerations to prevent risks in implant therapy10.1111/prd.12288 ↗
11. De novo alveolar bone formation adjacent to endosseous implants10.1034/j.1600-0501.2003.00972.x ↗
12. Early bone healing around different implant bulk designs and surgical techniques: A study in dogs10.1111/j.1708-8208.2009.00153.x ↗
13. Implant design and its effects on osseointegration over time within cortical and trabecular bone10.1002/jbm.b.33463 ↗
14. Biomechanical evaluation of undersized drilling on implant biomechanical stability at early implantation times10.1016/j.joms.2012.10.008 ↗
15. Effect of drilling technique on the early integration of plateau root form endosteal implants: An experimental study in dogs10.1016/j.joms.2011.01.029 ↗
16. Lopez-Valverde, N., Flores-Fraile, J., Ramirez, J.M., Sousa, B.M., Herrero-Hernandez, S., and Lopez-Valverde, A. (2020). Bioactive Surfaces vs. Conventional Surfaces in Titanium Dental Implants: A Comparative Systematic Review. J. Clin. Med., 9.10.3390/jcm9072047 ↗
17. The effect of different implant macrogeometries and surface treatment in early biomechanical fixation: An experimental study in dogs10.1016/j.jmbbm.2011.06.016 ↗
18. Osseointegration of metallic devices: Current trends based on implant hardware design10.1016/j.abb.2014.06.033 ↗
19. Osseointegration: Hierarchical designing encompassing the macrometer, micrometer, and nanometer length scales10.1016/j.dental.2014.10.007 ↗
20. Effects of thread features in osseo-integrated titanium implants using a statistics-based finite element method10.1016/j.dental.2012.04.035 ↗
21. Impact of implant thread design on insertion torque and osseointegration: A preclinical model
22. The effect of thread pattern upon implant osseointegration10.1111/j.1600-0501.2009.01800.x ↗
23. The effect of various thread designs on the initial stability of taper implants10.4047/jap.2009.1.1.19 ↗
24. Simplified drilling technique does not decrease dental implant osseointegration: A preliminary report10.1902/jop.2012.120565 ↗
25. Effect of low speed drilling on osseointegration using simplified drilling procedures10.1016/j.bjoms.2015.03.010 ↗
26. Delgado-Ruiz, R., Gold, J., Somohano Marquez, T., and Romanos, G. (2020). Under-Drilling versus Hybrid Osseodensification Technique: Differences in Implant Primary Stability and Bone Density of the Implant Bed Walls. Materials, 13.10.3390/ma13020390 ↗
27. Biomechanical and Histologic Basis of Osseodensification Drilling For Endosteal Implant Placement in Low Density Bone. An Experimental Study in Sheep10.1016/j.jmbbm.2016.06.007 ↗
28. Effect of Platelet-Rich Fibrin and Bone Morphogenetic Protein on Dental Implant Stability10.1097/SCS.0000000000005131 ↗
29. Bone Morphogenetic Protein Coating on Titanium Implant Surface: A Systematic Review10.5037/jomr.2017.8201 ↗
30. Combination of dip coating of BMP-2 and spray coating of PLGA on dental implants for osseointegration10.1016/j.jddst.2020.102296 ↗
31. Influence of the local application of sodium alendronate gel on osseointegration of titanium implants10.1016/j.ijom.2015.05.013 ↗
32. Effects of Local Drug and Chemical Compound Delivery on Bone Regeneration Around Dental Implants in Animal Models: A Systematic Review and Meta-Analysis10.11607/jomi.6333 ↗
33. Bone-Forming Capabilities of a Newly Developed NanoHA Composite Alloplast Infused with Collagen: A Pilot Study in the Sheep Mandible10.1155/2013/296391 ↗
34. Parathyroid hormone 1–34 and skeletal anabolic action: The use of parathyroid hormone in bone formation10.1302/2046-3758.61.BJR-2016-0085.R1 ↗
35. Increased osseointegration effect of bone morphogenetic protein 2 on dental implants: An in vivo study10.1002/jbm.a.34862 ↗
36. Direct or indirect stimulation of adenosine A2A receptors enhances bone regeneration as well as bone morphogenetic protein-210.1096/fj.14-265066 ↗
37. Selecting an Optimal Antiplatelet Agent for Secondary Stroke Prevention10.1212/CPJ.0000000000000842 ↗
38. Mechanism of action of dipyridamole10.1016/0049-3848(83)90356-0 ↗
39. Dipyridamole-loaded 3D-printed bioceramic scaffolds stimulate pediatric bone regeneration in vivo without disruption of craniofacial growth through facial maturity10.1038/s41598-019-54726-6 ↗
40. Ticagrelor regulates osteoblast and osteoclast function and promotes bone formation in vivo via an adenosine-dependent mechanism10.1096/fj.201600616R ↗
41. Dipyridamole enhances osteogenesis of three-dimensionally printed bioactive ceramic scaffolds in calvarial defects10.1016/j.jcms.2017.11.011 ↗
42. Repair of Critical-Sized Long Bone Defects Using Dipyridamole-Augmented 3D-Printed Bioactive Ceramic Scaffolds10.1002/jor.24424 ↗
43. Regeneration of a Pediatric Alveolar Cleft Model Using Three-Dimensionally Printed Bioceramic Scaffolds and Osteogenic Agents: Comparison of Dipyridamole and rhBMP-210.1097/PRS.0000000000005840 ↗
44. Bone Tissue Engineering in the Growing Calvaria Using Dipyridamole-Coated, Three-Dimensionally-Printed Bioceramic Scaffolds: Construct Optimization and Effects on Cranial Suture Patency10.1097/PRS.0000000000006483 ↗
45. Dipyridamole Augments Three-Dimensionally Printed Bioactive Ceramic Scaffolds to Regenerate Craniofacial Bone10.1097/PRS.0000000000005531 ↗
46. Effects of local single dose administration of parathormone on the early stages of osseointegration: A pre-clinical study10.1002/jbm.b.35038 ↗
47. Effects of a local single dose administration of growth hormone on the osseointegration of titanium implants10.4317/medoral.25164 ↗
48. Bone regeneration in critical bone defects using three-dimensionally printed beta-tricalcium phosphate/hydroxyapatite scaffolds is enhanced by coating scaffolds with either dipyridamole or BMP-210.1002/jbm.b.33561 ↗
49. Transforming the Degradation Rate of beta-tricalcium Phosphate Bone Replacement Using 3-Dimensional Printing10.1097/SAP.0000000000002965 ↗
50. Fabrication and characterization of injectable thermosensitive hydrogel containing dipyridamole loaded polycaprolactone nanoparticles for bone tissue engineering10.1016/j.jddst.2021.102659 ↗
51. Synergistic Effects of Implant Macrogeometry and Surface Physicochemical Modifications on Osseointegration: An In Vivo Experimental Study in Sheep10.1615/JLongTermEffMedImplants.2020034194 ↗
52. Plecko, M., Sievert, C., Andermatt, D., Frigg, R., Kronen, P., Klein, K., Stubinger, S., Nuss, K., Burki, A., and Ferguson, S. (2012). Osseointegration and biocompatibility of different metal implants--a comparative experimental investigation in sheep. BMC Musculoskelet. Disord., 13.10.1186/1471-2474-13-32 ↗
53. Comparison of Er:YAG laser, piezoelectric, and drill osteotomy for dental implant site preparation: A biomechanical and histological analysis in sheep10.1002/lsm.20944 ↗
54. Histological and biomechanical analysis of porous additive manufactured implants made by direct metal laser sintering: A pilot study in sheep10.1002/jbm.b.32925 ↗
55. The design and use of animal models for translational research in bone tissue engineering and regenerative medicine10.1089/ten.teb.2009.0658 ↗