journal article·2024-06-29Open access

Cytocompatibility of Polymers for Skin-Contact Applications Produced via Pellet Extrusion

Sakine Deniz Varsavas, Paweł Michalec, Mohammed Khalifa, Ping Li, Sebastian Spintzyk

Abstract

Orthoses and prostheses (O&P) play crucial roles in assisting individuals with limb deformities or amputations. Proper material selection for these devices is imperative to ensure mechanical robustness and biocompatibility. While traditional manufacturing methods have limitations in terms of customization and reproducibility, additive manufacturing, particularly pellet extrusion (PEX), offers promising advancements. In applications involving direct contact with the skin, it is essential for materials to meet safety standards to prevent skin irritation. Hence, this study investigates the biocompatibility of different thermoplastic polymers intended for skin-contact applications manufactured through PEX. Surface morphology analysis revealed distinct characteristics among materials, with TPE-70ShA exhibiting notable irregularities. Cytotoxicity assessments using L929 fibroblasts indicated non-toxic responses for most materials, except for TPE-70ShA, highlighting the importance of material composition in biocompatibility. Our findings underscore the significance of adhering to safety standards in material selection and manufacturing processes for medical devices. While this study provides valuable insights, further research is warranted to investigate the specific effects of individual ingredients and explore additional parameters influencing material biocompatibility. Overall, healthcare practitioners must prioritize patient safety by meticulously selecting materials and adhering to regulatory standards in O&P manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

ADMiRE Research Center, Carinthia University of Applied Sciences, Europastraße 4, 9524 Villach, Austria

Competence Center for Wood Composites and Wood Chemistry, Wood K Plus, Klagenfurter Str. 87–89, 9300 St. Veit an der Glan, Austria

Department of Prosthodontics, School and Hospital of Stomatology, Guangdong Engineering Research Center of Oral Restoration and Reconstruction, Guangzhou Medical University, Guangzhou 510180, China

Guangzhou Key Laboratory of Basic and Applied Research of Oral Regenerative Medicine, Guangzhou Medical University, Guangzhou 510180, China

Funding

Austrian-Chinese Cooperative R&D Projects · Austrian-Chinese Cooperative RTD Projects FFG & CAS · Federal Ministry for Digital and Economic Affairs (BMDW) · Austrian Research Promotion Agency (FFG) · National Natural Science Foundation of China · Guangdong Basic and Applied Basic Research Foundation

References (29)

Show source-provided references
1. Additive manufacturing of custom orthoses and prostheses—A review
2. Cordella, F., Ciancio, A.L., Sacchetti, R., Davalli, A., Cutti, A.G., Guglielmelli, E., and Zollo, L. (2016). Literature Review on Needs of Upper Limb Prosthesis Users. Front. Neurosci., 10.10.3389/fnins.2016.00209 ↗
3. Arazpour, M. (2021). Prosthetics for Lower Limb Amputation. Prosthetics and Orthotics, IntechOpen.10.5772/intechopen.90812 ↗
4. A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis10.1016/j.jmbbm.2019.07.020 ↗
5. Progress in material design for biomedical applications10.1073/pnas.1516247112 ↗
6. (2006). External Limb Prostheses and External Orthoses: Requirements and Test Methods (Standard No. ISO 22523:2006).
7. Davim, J., Kumar, K., and Davim, J.P. (2019). A Review on Materials for Orthotic Devices: Processing and Characterization. Design, Development, and Optimization of Bio-Mechatronic Engineering Products, IGI Global.10.4018/978-1-5225-8235-9 ↗
8. Potential use of natural fiber-reinforced polymer biocomposites in knee prostheses: A review on fair inclusion in amputees10.1007/s13726-022-01077-1 ↗
9. Olsen, J., Day, S., Dupan, S., Nazarpour, K., and Dyson, M. (2020). 3D-Printing and upper-limb prosthetic sockets; promises and pitfalls. bioRxiv.10.1101/2020.09.21.306050 ↗
10. Flexural, impact and max. shear stress properties of fibers composite for prosthetic socket10.1016/j.matpr.2021.12.368 ↗
11. Chaparro-Rico, B., Martinello, K., Fucile, S., and Cafolla, D. (2021). User-Tailored Orthosis Design for 3D Printing with PLACTIVE: A Quick Methodology. Crystals, 11.10.3390/cryst11050561 ↗
12. (2023, March 20). Global Prosthetics and Orthotics Markets Report 2022–2028: Leading Players Such as Bauerfeind, Ossur, Fillauer, and Ottobock are Highly Focused on Launching New Orthotics and Prosthetics Products. Research and Markets. Available online: https://www.globenewswire.com/en/news-release/2023/01/11/2586842/28124/en/Global-Prosthetics-and-Orthotics-Markets-Report-2022-2028-Leading-Players-Such-as-Bauerfeind-Ossur-Fillauer-and-Ottobock-are-Highly-Focused-on-Launching-New-Orthotics-and-Prostheti.html.
13. Material selection for biomedical application in additive manufacturing using TOPSIS approach10.1016/j.matpr.2022.01.423 ↗
14. Biocompatible and breathable healthcare electronics with sensing performances and photothermal antibacterial effect for motion-detecting10.1038/s41528-022-00228-x ↗
15. Preliminary study on the use of 3D printed biodegradable polymeric sheet for the manufacturing of medical prostheses by SPIF10.1016/j.procir.2022.06.016 ↗
16. Adopting additive manufacturing as a cleaner fabrication framework for topologically optimized orthotic devices: Implications over sustainable rehabilitation10.1016/j.clet.2022.100559 ↗
17. Liu, J., Naeem, M.A., Al Kouzbary, M., Al Kouzbary, H., Shasmin, H.N., Arifin, N., Abd Razak, N.A., and Abu Osman, N.A. (2023). Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material. Polymers, 15.10.3390/polym15020255 ↗
18. Zuniga, J. (2018). 3D Printed Antibacterial Prostheses. Appl. Sci., 8.10.3390/app8091651 ↗
19. Michalec, P., Varsavas, S.D., Arbeiter, F., Weidner, R., and Faller, L.-M. (2024). Effects of Printing Direction and Multi-material on Hardness of Additively Manufactured Thermoplastic Elastomers for Comfortable Orthoses and Prostheses. Additive Manufacturing in Multidisciplinary Cooperation and Production, Springer.10.1007/978-3-031-37671-9_4 ↗
20. iLEAD—Intelligent lightweight functional and hybrid 3D-printing for medical assistive devices: Current status focusing on the multi-material aspect10.1016/j.matpr.2022.09.537 ↗
21. (2009). Biological Evaluation of Medical Devices: Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993-5:2009).
22. (2021). Biological Evaluation of Medical Devices: Part 12: Sample Preparation and Reference Materials (Standard No. ISO 10993-12:2021).
23. Chen, J., Dai, J., Qian, J., Li, W., Li, R., Pang, D., Wan, G., Li, P., and Xu, S. (2022). Influence of Surface Roughness on Biodegradability and Cytocompatibility of High-Purity Magnesium. Materials, 15.10.3390/ma15113991 ↗
24. Selection of extraction medium influences cytotoxicity of zinc and its alloys10.1016/j.actbio.2019.03.013 ↗
25. Friction in the contact between skin and a soft counter material: Effects of hardness and surface finish10.1016/j.jmbbm.2019.01.006 ↗
26. Effects of humidity on skin friction against medical textiles as related to prevention of pressure injuries10.1111/iwj.12937 ↗
27. Hall, D.C., Palmer, P., Ji, H.-F., Ehrlich, G.D., and Król, J.E. (2021). Bacterial Biofilm Growth on 3D-Printed Materials. Front. Microbiol., 12.10.3389/fmicb.2021.646303 ↗
28. Towards fabrication of 3D printed medical devices to prevent biofilm formation10.1016/j.ijpharm.2013.11.001 ↗
29. Peel bond strength between 3D printing tray materials and elastomeric impression/adhesive systems: A laboratory study10.1016/j.dental.2020.04.015 ↗