journal article·2023-12-19Open access

Sacrificial-Rotating Rod-Based 3D Bioprinting Technique for the Development of an In Vitro Cardiovascular Model

Jooyoung Lee, Hyungseok Lee

Abstract

Several studies have attempted to develop complex cardiovascular models, but the use of multiple cell types and poor cell alignments after fabrication have limited the practical application of these models. Among various bioprinting methods, extrusion-based bioprinting is the most widely used in the bioengineering field. This method not only has the potential to construct complex 3D biological structures but it also enables the alignment of cells in the printing direction owing to the application of shear stress to the cells during the printing process. Therefore, this study developed an in vitro cardiovascular model using an extrusion-based bioprinting method that utilizes a rotating rod as a printing platform. The rotating rod was made of polyvinyl alcohol (PVA) and used as a sacrificial rod. This rotating platform approach enabled the printing of longer tubular-vascular structures of multiple shapes, including disease models, and the water-soluble properties of PVA facilitated the isolation of the printed vascular models. In addition, this method enabled the printing of the endothelial cells in the bloodstream direction and smooth muscle cells in the circumferential direction to better mimic the anatomy of real blood vessels. Consequently, a cardiovascular model was successfully printed using a gelatin methacryloyl bioink with cells. In conclusion, the proposed fabrication method can facilitate the fabrication of various cardiovascular models that mimic the alignment of real blood vessels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Smart Health Science and Technology, Kangwon National University (KNU), Chuncheon 24341, Republic of Korea

Department of Mechanical and Biomedical Engineering, Kangwon National University (KNU), Chuncheon 24341, Republic of Korea

Funding

National Research Foundation of Korea (NRF)

References (39)

Show source-provided references
1. Babu, A.S., Lopez-Jimenez, F., Thomas, R.J., Isaranuwatchai, W., Herdy, A.H., Hoch, J.S., and Grace, S.L. (2016). Advocacy for outpatient cardiac rehabilitation globally. BMC Health Serv. Res., 16.10.1186/s12913-016-1658-1 ↗
2. A novel approach to diagnosing coronary artery disease: Acoustic detection of coronary turbulence10.1007/s10554-016-0970-5 ↗
3. Acoustic detection of coronary artery disease10.1146/annurev.bioeng.9.060906.151840 ↗
4. Fazal, F., Raghav, S., Callanan, A., Koutsos, V., and Radacsi, N. (2021). Recent advancements in the bioprinting of vascular grafts. Biofabrication, 13.10.1088/1758-5090/ac0963 ↗
5. Parallel fabrication of macroporous scaffolds10.1002/bit.26593 ↗
6. Electrospun scaffolds for tissue engineering of vascular grafts10.1016/j.actbio.2013.08.022 ↗
7. Porcine radial artery decellularization by high hydrostatic pressure10.1002/term.1662 ↗
8. Decellularized porcine saphenous artery for small-diameter tissue-engineered conduit graft10.1111/aor.12014 ↗
9. Combining cell sheet technology and electrospun scaffolding for engineered tubular, aligned, and contractile blood vessels10.1016/j.biomaterials.2013.12.035 ↗
10. Engineered small diameter vascular grafts by combining cell sheet engineering and electrospinning technology10.1016/j.actbio.2015.01.030 ↗
11. Schneller, T., Waser, R., Kosec, M., and Payne, D. (2013). Chemical Solution Deposition of Functional Oxide Thin Films, Springer.10.1007/978-3-211-99311-8 ↗
12. Current advances and future perspectives in extrusion-based bioprinting10.1016/j.biomaterials.2015.10.076 ↗
13. Ding, H., and Chang, R.C. (2018). Printability study of bioprinted tubular structures using liquid hydrogel precursors in a support bath. Appl. Sci., 8.10.3390/app8030403 ↗
14. Direct bioprinting of vessel-like tubular microfluidic channels10.1115/1.4024398 ↗
15. Coaxial cell printing of freestanding, perfusable, and functional in vitro vascular models for recapitulation of native vascular endothelium pathophysiology10.1002/adhm.201801102 ↗
16. Effects of endodontic materials on cell viability across standard pore size filters10.1016/S0099-2399(85)80029-7 ↗
17. 3D Printable Gelatin Methacryloyl (GelMA)-Dextran Aqueous Two-Phase System with Tunable Pores Structure and Size Enables Physiological Behavior of Embedded Cells In Vitro10.1002/smll.202208089 ↗
18. Modeling mass transfer in hepatocyte spheroids via cell viability, spheroid size, and hepatocellular functions10.1002/bit.20086 ↗
19. GelMA-encapsulated hDPSCs and HUVECs for dental pulp regeneration10.1177/0022034516682005 ↗
20. Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., and Ovsianikov, A. (2016). Bioink properties before, during and after 3D bioprinting. Biofabrication, 8.10.1088/1758-5090/8/3/032002 ↗
21. Shear-thinning hydrogels for biomedical applications10.1039/C1SM06513K ↗
22. Zin, M.H., Abdan, K., and Norizan, M.N. (2019). Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Elsevier.
23. Functional porous hydrogels to study angiogenesis under the effect of controlled release of vascular endothelial growth factor10.1016/j.actbio.2012.05.019 ↗
24. In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels10.1039/C7BM00110J ↗
25. A review of polyvinyl alcohol and its uses in cartilage and orthopedic applications10.1002/jbm.b.32694 ↗
26. Nagarajan, S., Belaid, H., Radhakrishnan, S., Teyssier, C., Balme, S., Miele, P., Cornu, D., Subbaraya, N.K., Cavaillès, V., and Bechelany, M. (2021). Sacrificial mold-assisted 3D printing of stable biocompatible gelatin scaffolds. Bioprinting, 22.10.1016/j.bprint.2021.e00140 ↗
27. Optimization of polyvinyl alcohol (PVA) support parameters for fused deposition modelling (FDM) by using design of experiments (DOE)10.1016/j.matpr.2021.11.046 ↗
28. Biocompatibility and hemocompatibility of polyvinyl alcohol hydrogel used for vascular grafting—In vitro and in vivo studies
29. 3D bioprinting of functional cell-laden bioinks and its application for cell-alignment and maturation10.1016/j.apmt.2020.100588 ↗
30. Boularaoui, S., Al Hussein, G., Khan, K.A., Christoforou, N., and Stefanini, C. (2020). An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability. Bioprinting, 20.10.1016/j.bprint.2020.e00093 ↗
31. Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique10.1038/s41598-018-28715-0 ↗
32. Nanofiber electrospinning combined with rotary bioprinting for fabricating small-diameter vessels with endothelium and smooth muscle10.1016/j.compositesb.2022.109691 ↗
33. Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography10.1016/j.actbio.2020.09.033 ↗
34. Hydrogels for tissue engeneering10.1021/cr000108x ↗
35. Numerical study of pulsatile blood flow in stenotic artery10.3795/KSME-B.2008.32.11.891 ↗
36. Heltmann-Meyer, S., Steiner, D., Müller, C., Schneidereit, D., Friedrich, O., Salehi, S., Engel, F.B., Arkudas, A., and Horch, R.E. (2021). Gelatin methacryloyl is a slow degrading material allowing vascularization and long-term use in vivo. Biomed. Mater., 16.10.1088/1748-605X/ac1e9d ↗
37. In vitro and in vivo assessment of a 3D printable gelatin methacrylate hydrogel for bone regeneration applications10.1002/jbm.b.35067 ↗
38. 3D Printing of Customized Drug Delivery Systems with Controlled Architecture via Reversible Addition-Fragmentation Chain Transfer Polymerization10.1002/adem.202201785 ↗
39. Gelatin methacrylate/carboxybetaine methacrylate hydrogels with tunable crosslinking for controlled drug release10.1039/C5TB02518D ↗