journal article·2023-10-21Open access

An In Vitro Study regarding the Wear of Composite Materials Following the Use of Dental Bleaching Protocols

Alexandru Dan Popescu, Mihaela Jana Ţuculină, Lelia Mihaela Gheorghiță, Andrei Osman, Claudiu Nicolicescu, Smaranda Adelina Bugălă, Mihaela Ionescu, Jaqueline Abdul-Razzak, Oana Andreea Diaconu, Bogdan Dimitriu

Journal of Functional Biomaterials· Volume 14· Issue 10

Abstract

Composite materials used in dental restorations are considered resistant, long-lasting and aesthetic. As the wear of restorations is an important element in long-term use, the aim of this study was to evaluate the surface condition of nanohybrid and microfilled composite resins, after being subjected to the erosive action of dental bleaching protocols. This paper reflects a comparative study between one nanofilled composite and three microfilled composites used in restorations. For each composite, three sets of samples (under the form of composite discs) were created: a control group, an “office bleach” group with discs bleached with 40% hydrogen peroxide gel, and a “home bleach” group with discs bleached with 16% carbamide peroxide gel. Wear was numerically determined as the trace and the coefficients of friction obtained using a tribometer, the ball-on-disk test method, and two balls: alumina and sapphire. For all composite groups, there were statistically significant differences between the wear corresponding to the control and bleaching groups, for both testing balls. Regarding the composite type, the largest traces were recorded for GC Gradia direct anterior, for all groups, using the alumina ball. In contrast, for the sapphire ball, 3M ESPE Filtek Z550 was characterized by the largest traces. With respect to the friction coefficients, the “office bleach” group recorded the largest values, no matter the composite or the ball type used. The 3M ESPE Valux Plus composite recorded the largest friction coefficients for the alumina ball, and 3M ESPE Filtek Z550 for the sapphire ball. Overall, the “office bleach” group was characterized by higher composite wear, compared to the “home bleach” protocol or control group. Nanofilled composite resins showed superior wear resistance to microfilled resins after undergoing a bleaching protocol.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Erosion and Treatment · Dental materials and restorations · Temporomandibular Joint Disorders

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Endodontics, Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of Anatomy and Embriology, Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department ENT, Clinical Emergency County Hospital of Craiova, 200642 Craiova, Romania

Department of Engineering and Management of the Technological Systems 1 Calugareni, Faculty of Mechanics, University of Craiova, 220153 Drobeta-Turnu Severin, Romania

Department of Medical Informatics and Biostatistics, Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of Infant Care–Pediatrics–Neonatology & Doctoral School, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of Endodontics, Faculty of Dentistry, University of Medicine and Pharmacy Carol Davila Bucharest, 050474 Bucharest, Romania

Funding

University of Medicine and Pharmacy of Craiova, Romania

References (89)

Show source-provided references
1. Șaramet, V., Meleșcanu-Imre, M., Țâncu, A.M.C., Albu, C.C., Ripszky-Totan, A., and Pantea, M. (2021). Molecular Interactions between Saliva and Dental Composites Resins: A Way Forward. Materials, 14.10.3390/ma14102537 ↗
2. Resin based restorative dental materials: Characteristics and future perspectives10.1016/j.jdsr.2019.09.004 ↗
3. Hasanain, F.A., Nassar, H.M., and Ajaj, R.A. (2022). Effect of Light Curing Distance on Microhardness Profiles of Bulk-Fill Resin Composites. Polymers, 14.10.3390/polym14030528 ↗
4. Microstructural Features of Current Resin Composite Materials10.1007/s40496-014-0029-4 ↗
5. Posterior bulk-filled resin composite restorations: A 5-year randomized controlled clinical study10.1016/j.jdent.2016.05.008 ↗
6. Development and status of resin composite as dental restorative materials10.1002/app.48180 ↗
7. Physical and mechanical properties of bulk-fill, conventional, and flowable resin composites stored dry and wet
8. Comparative evaluation of the degree of conversion of four different composites polymerized using ultrafast photopolymerization technique: An in vitro study10.4103/jcd.jcd_648_20 ↗
9. The effect of composite type on microhardness when using quartz-tungsten-halogen (Qth) or Led lights
10. Microhardness Evaluation of Microfilled Versus Nanofilled Resin Composite After Exposure to Acidic Drinks10.4103/jispcd.JISPCD_66_22 ↗
11. Effects of nanofillers on mechanical properties of fiber-reinforced composites polymerized with light-curing and additional postcuring
12. Cunha, D.A., Rodrigues, N.S., Souza, L.C., Lomonaco, D., Rodrigues, F.P., Degrazia, F.W., Collares, F.M., Sauro, S., and Saboia, V.P.A. (2018). Physicochemical and microbiological assessment of an experimental composite doped with triclosan-loaded halloysite nanotubes. Materials, 11.10.3390/ma11071080 ↗
13. Scribante, A., Bollardi, M., Chiesa, M., Poggio, C., and Colombo, M. (2019). Flexural properties and elastic modulus of different esthetic restorative materials: Evaluation after exposure to acidic drink. BioMed Res. Int., 2019.10.1155/2019/5109481 ↗
14. Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: Microhardness and roughness testing10.5395/rde.2019.44.e1 ↗
15. Babina, K., Polyakova, M., Sokhova, I., Doroshina, V., Arakelyan, M., and Novozhilova, N. (2020). The Effect of Finishing and Polishing Sequences on The Surface Roughness of Three Different Nanocomposites and Composite/Enamel and Composite/Cementum Interfaces. Nanomaterials, 10.10.3390/nano10071339 ↗
16. Effect of lights with various wavelengths on bleaching by 30% hydrogen peroxide10.1007/s10103-018-2670-y ↗
17. In Vitro Evaluation of the Effectiveness of Dental Bleaching with Carbamide Peroxide and Violet Light. Photobiomodul. Photomed
18. An overview on the Effects of 10% and 15% Carbamide Peroxide and its Relationship to Dentine Sensitivity
19. In-office bleaching with low/medium vs. high concentrate hydrogen peroxide: A systematic review and meta-analysis10.1016/j.jdent.2020.103499 ↗
20. Khashashneh, M., Ratnayake, J., Choi, J.J.E., Mei, L., Lyons, K., and Brunton, P. (2023). The Effect of 10% Carbamide Peroxide Dental Bleaching on the Physical Properties of Invisalign Aligners: An In Vitro Study. Materials, 16.10.3390/ma16114125 ↗
21. The Effect of Bleaching on the Basic Colour and Discoloration Susceptibility of Dental Composites
22. Effect of three bleaching agents on the surface properties of three different esthetic restorative materials10.1016/S0022-3913(03)00105-7 ↗
23. Effect of Bleaching on Microhardness of Esthetic Restorative Materials10.2341/10-078-L ↗
24. Effect of bleaching on subsurface microhardness of composite and a polyacid modified composite10.1016/j.dental.2006.01.008 ↗
25. Wear of dental resin composites: Insights into underlying processes and assessment methods—A review10.1002/jbm.b.10563 ↗
26. Effect of In-Office Carbamide Peroxide-Based Tooth Bleaching System on Wear Resistance of Silorane-Based and Methacrylate-Based Dental Composites
27. Future perspectives of resin-based dental materials10.1016/j.dental.2009.02.009 ↗
28. Changes of the Mineral Structure in the Enamel Adjacent to Three Types of Restorative Materials after Immersion in Hydrochloric Acid
29. Resistance of nanofill and nanohybrid resin composites to toothbrush abrasion with calcium carbonate slurry10.4012/dmj.28.708 ↗
30. Investigations on mechanical behaviour of dental composites10.1007/s00784-009-0258-4 ↗
31. Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties10.1016/j.dental.2017.04.013 ↗
32. Contact- and contact-free wear between various resin composites10.1016/j.dental.2014.11.007 ↗
33. The in vitro wear behavior of experimental resin-based composites derived from a commercial formulation10.1016/j.dental.2012.12.005 ↗
34. The effect of finishing and polishing systems on surface roughness, microhardness and microleakage of a nanohybrid composite
35. Nanofilled Resin Composite Properties and Clinical Performance: A Review10.2341/17-208-T ↗
36. Comparison of flowable bulk-fill and flowable resin-based composites: An in vitro analysis10.1007/s00784-015-1700-4 ↗
37. Wear of direct resin composites and teeth: Considerations for oral rehabilitation10.1111/eos.12600 ↗
38. Wear resistance and abrasiveness of CAD-CAM monolithic materials10.1016/j.prosdent.2018.05.011 ↗
39. Wear of bulk-fill resin composites10.1016/j.dental.2021.12.138 ↗
40. Gwon, B., Bae, E.B., Lee, J.J., Cho, W.T., Bae, H.Y., Choi, J.W., and Huh, J.B. (2019). Wear characteristics of dental ceramic CAD/CAM materials opposing various dental composite resins. Materials, 12.10.3390/ma12111839 ↗
41. Wear of resin composites: Current insights into underlying mechanisms, evaluation methods and influential factors10.1016/j.jdsr.2017.11.002 ↗
42. Investigations towards nano-hybrid resin-based composites10.1007/s00784-012-0689-1 ↗
43. Wear of contemporary dental composite resin restorations: A literature review10.5395/rde.2021.46.e18 ↗
44. Impact of filler size and distribution on roughness and wear of composite resin after simulated toothbrushing10.1590/S1678-77572012000500003 ↗
45. Is tribology approaching its golden age? Grand challenges in engineering education and tribological research10.3389/fmech.2018.00016 ↗
46. Pure ormocer vs methacrylate composites on posterior teeth: A double-blinded randomized clinical trial10.2341/19-079-C ↗
47. Asadian, F., Hoseini, A.P., Ahmadian, L., Rafeie, N., Rezaei, S., and Moradi, Z. (2022). In vitro attrition wear resistance of four types of paste-like bulk-fill composite resins. BMC Oral Health, 22.10.1186/s12903-022-02393-x ↗
48. Interaction between attrition, abrasion and erosion in tooth wear10.1159/000093348 ↗
49. Comparison of occlusal wear between bulk-fill and conventional flowable resin composites
50. In Vitro Evaluation of Surface Properties and Wear Resistance of Conventional and Bulk-fill Resin-based Composites After Brushing with a Dentifrice10.2341/18-200-L ↗
51. Asadian, F., Shahidi, Z., and Moradi, Z. (2021). Evaluation of Wear Properties of Four Bulk-Fill Composites: Attrition, Erosion, and Abrasion. BioMed Res. Int., 2021.10.1155/2021/8649616 ↗
52. Effect of oral irrigation device and its solution type on the surface roughness and topography of Bulk-fill composite resins
53. Effect of Er: YAG Laser on Microtensile Bond Strength of Bleached Dentin to Composite10.15171/jlms.2019.19 ↗
54. The effect of chewing simulation on surface roughness of resin composite when opposed by zirconia ceramic and lithium disilicate ceramic10.1016/j.dental.2017.11.014 ↗
55. Effect of tooth brushing on gloss retention and surface roughness of five bulk-fill resin composites10.1111/jerd.12350 ↗
56. AlAli, M., Silikas, N., and Satterthwaite, J. (2021). The Effects of Toothbrush Wear on the Surface Roughness and Gloss of Resin Composites with Various Types of Matrices. Dent. J., 9.10.3390/dj9010008 ↗
57. Influence of mechanical and chemical degradation on surface gloss of resin composite materials
58. Schubert, A., Wassmann, T., Holtappels, M., Kurbad, O., Krohn, S., and Buergers, R. (2019). Predictability of Microbial Adhesion to Dental Materials by Roughness Parameters. Coatings, 9.10.3390/coatings9070456 ↗
59. Effects of tooth brushing on wear, surface roughness, and color stability of composite resins—A review
60. Pieniak, D., Walczak, A., Walczak, M., Przystupa, K., and Niewczas, A.M. (2020). Hardness and Wear Resistance of Dental Biomedical Nanomaterials in a Humid Environment with Non-Stationary Temperatures. Materials, 13.10.3390/ma13051255 ↗
61. Kontonasaki, E., Rigos, A.E., Ilia, C., and Istantsos, T. (2019). Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance. Dent. J., 7.10.3390/dj7030090 ↗
62. Matsumura, K., Sato, Y., Kitagawa, N., Shichita, T., Kawata, D., and Ishikawa, M. (2018). Influence of denture surface roughness and host factors on dental calculi formation on dentures: A cross-sectional study. BMC Oral Health, 18.10.1186/s12903-018-0543-1 ↗
63. Oja, J., Lassila, L., Vallittu, P.K., and Garoushi, S. (2021). Effect of Accelerated Aging on Some Mechanical Properties and Wear of Different Commercial Dental Resin Composites. Materials, 14.10.3390/ma14112769 ↗
64. Fang, M., Zhang, N., Huang, M., Lu, B., Lamnawar, K., Liu, C., and Shen, C. (2020). Effects of Hydrothermal Aging of Carbon Fiber Reinforced Polycarbonate Composites on Mechanical Performance and Sand Erosion Resistance. Polymers, 12.10.3390/polym12112453 ↗
65. Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics10.1016/j.jmbbm.2018.08.008 ↗
66. Does artificial aging affect mechanical properties of CAD/CAM composite materials10.1016/j.jpor.2017.06.001 ↗
67. Wear of dental materials: Clinical significance and laboratory wear simulation methods -A review10.4012/dmj.2018-140 ↗
68. Lanza, A., Ruggiero, A., and Sbordone, L. (2019). Tribology and dentistry: A commentary. Lubricants, 7.10.3390/lubricants7060052 ↗
69. A critical evaluation of tribological interaction for restorative materials in dentistry10.1080/00914037.2018.1525544 ↗
70. Quality and Survival of Direct Light-Activated Composite Resin Restorations in Posterior Teeth: A 5- to 20-Year Retrospective Longitudinal Study10.1111/jopr.12630 ↗
71. Arbildo-Vega, H.I., Lapinska, B., Panda, S., Lamas-Lara, C., Khan, A.S., and Lukomska-Szymanska, M. (2020). Clinical Effectiveness of Bulk-Fill and Conventional Resin Composite Restorations: Systematic Review and Meta-Analysis. Polymers, 12.10.3390/polym12081786 ↗
72. A Review of Mechano-Biochemical Models for Testing Composite Restorations10.1177/00220345211026918 ↗
73. La Rosa, G.R.M., Generali, L., Bugea, C., Ounsi, H.F., Benyőcs, G., Neelakantan, P., and Pedullà, E. (2022). Application of Tribology Concept in Dental Composites Field: A Scoping Review. J. Funct. Biomater., 13.10.3390/jfb13040287 ↗
74. Effects of silica nanoparticles and silica-zirconia nanoclusters on tribological properties of dental resin composites
75. Hydroxyapatite based hybrid dental materials with controlled porosity and improved tribological and mechanical properties10.1179/1433075X12Y.0000000063 ↗
76. Comparative investigation of tribological behavior of hybrid dental restorative composite materials10.1016/j.ceramint.2021.11.220 ↗
77. Tribological behavior of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials10.1002/pc.26597 ↗
78. Madeira, S., Buciumeanu, M., Nobre, D., Carvalho, O., and Silva, F.S. (2022). Development of a novel hybrid Ti6Al4V-ZrO2 surface with high wear resistance by laser and hot pressing techniques for dental implants. J. Mech. Behav. Biomed. Mater., 136.10.1016/j.jmbbm.2022.105508 ↗
79. Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting10.1016/S1003-6326(17)60060-8 ↗
80. Influence of sintering pressure on the microstructure and tribological properties of low temperature fast sintered hot-pressed Y-TZP10.1016/j.ceramint.2018.12.055 ↗
81. Human tooth wear in the past and the present: Tribological mechanisms, scoring systems, dental and skeletal compensations10.1016/j.archoralbio.2011.08.021 ↗
82. Tribological characterization of bioactive zirconia composite layers on zirconia structures10.1016/j.ceramint.2018.07.094 ↗
83. Effects of the test method on wear measurements in dental enamel/ceramic tribosystems10.1016/j.ceramint.2021.10.061 ↗
84. Novel zirconia materials in dentistry10.1177/0022034517737483 ↗
85. Wear of ceramic-based dental materials10.1016/j.jmbbm.2019.01.009 ↗
86. Sanchez-Gonzalez, E., Pinilla-Cienfuegos, E., Borrero-Lopez, O., Rodríguez-Rojas, F., and Guiberteau, F. (2020). Contact damage of human dental enamel under cyclic axial loading with abrasive particles. J. Mech. Behav. Biomed. Mater., 102.10.1016/j.jmbbm.2019.103512 ↗
87. Tooth wear: The view of the anthropologist10.1007/s00784-007-0154-8 ↗
88. Levrini, L., Di Benedetto, G., and Raspanti, M. (2014). Dental wear: A scanning electron microscope study. BioMed Res Int., 2014.10.1155/2014/340425 ↗
89. Mulic, A., Ruud, A., Stenhagen, I.R., Bruzell, E., and Tulek, A. (2023). Deterioration of direct restorative materials under erosive conditions with impact of abrasion and attrition in vitro. Biomater. Investig. Dent., 10.10.1080/26415275.2023.2202211 ↗