journal article·2023-03-04Open access

Characterization of Cyclic Olefin Copolymers for Insulin Reservoir in an Artificial Pancreas

Norma Mallegni, Mario Milazzo, Caterina Cristallini, Niccoletta Barbani, Giulia Fredi, Andrea Dorigato, Patrizia Cinelli, Serena Danti

Abstract

Type-1 diabetes is one of the most prevalent metabolic disorders worldwide. It results in a significant lack of insulin production by the pancreas and the ensuing hyperglycemia, which needs to be regulated through a tailored administration of insulin throughout the day. Recent studies have shown great advancements in developing an implantable artificial pancreas. However, some improvements are still required, including the optimal biomaterials and technologies to produce the implantable insulin reservoir. Here, we discuss the employment of two types of cyclic olefin copolymers (Topas 5013L-10 and Topas 8007S-04) for an insulin reservoir fabrication. After a preliminary thermomechanical analysis, Topas 8007S-04 was selected as the best material to fabricate a 3D-printed insulin reservoir due to its higher strength and lower glass transition temperature (Tg). Fiber deposition modeling was used to manufacture a reservoir-like structure, which was employed to assess the ability of the material to prevent insulin aggregation. Although the surface texture presents a localized roughness, the ultraviolet analysis did not detect any significant insulin aggregation over a timeframe of 14 days. These interesting results make Topas 8007S-04 cyclic olefin copolymer a potential candidate biomaterial for fabricating structural components in an implantable artificial pancreas.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Pancreatic function and diabetes · 3D Printing in Biomedical Research · Microfluidic and Capillary Electrophoresis Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino, 56126 Pisa, Italy

National Interuniversity Consortium for Materials Science and Technology (INSTM), Via Giuseppe Giusti 9, 50121 Florence, Italy

Institute for Chemical and Physical Processes (IPCF), National Council of Researches (CNR), Via Giuseppe Moruzzi 1, 56126 Pisa, Italy

Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123 Trento, Italy

Funding

Tuscany Region (MIUR-MISE-Regione Toscana DGRT 758/2013, Bando PAR FAS 2007–2013—Azione 1.1.2; BANDO FAS SALUTE 2014), Robo-Implant Project

References (45)

Show source-provided references
1. Diagnosis and Classification of Diabetes Mellitus10.2337/diacare.29.s1.06.s43 ↗
2. The Artificial Pancreas: Current Status and Future Prospects in the Management of Diabetes10.1111/nyas.12431 ↗
3. Effect of Laminin on the Interaction Between Islets and an Implantable Immunoisolation Polyurethane Membrane10.1115/1.3136844 ↗
4. The Bioartificial Pancreas (BAP): Biological, Chemical and Engineering Challenges10.1016/j.bcp.2015.08.107 ↗
5. Evaluation of a Novel Artificial Pancreas: Closed Loop Glycemic Control System with Continuous Blood Glucose Monitoring10.1111/aor.12068 ↗
6. Using Modeling and Simulation in the Design of Closed-Loop Insulin Delivery System10.1115/1.4024340 ↗
7. Upcoming Devices for Diabetes Management: The Artificial Pancreas as the Hallmark Device10.1089/dia.2014.0303 ↗
8. Wearable and Implantable Pancreas Substitutes10.1007/s10047-012-0660-6 ↗
9. Intraperitoneal Insulin Delivery Provides Superior Glycaemic Regulation to Subcutaneous Insulin Delivery in Model Predictive Control-Based Fully-Automated Artificial Pancreas in Patients with Type 1 Diabetes: A Pilot Study10.1111/dom.12999 ↗
10. Bin Implantable Batteryless Device for On-Demand and Pulsatile Insulin Administration10.1038/ncomms15032 ↗
11. Implantable Insulin Delivery Pumps10.1080/13645700410004582 ↗
12. The Grand Challenges of Science Robotics10.1126/scirobotics.aar7650 ↗
13. Toward Dosing Precision and Insulin Stability in an Artificial Pancreas System10.1115/1.4042459 ↗
14. Insulin Formulation Characterization—The Thioflavin T Assays10.1208/s12248-016-0028-6 ↗
15. Thioflavin T as an Amyloid Dye: Fibril Quantification, Optimal Concentration and Effect on Aggregation10.1098/rsos.160696 ↗
16. Materials for Diabetes Therapeutics10.1002/adhm.201200037 ↗
17. Assessment of a New Insulin Preparation for Implanted Pumps Used in the Treatment of Type 1 Diabetes10.1089/dia.2013.0369 ↗
18. Effect of Contact Material on Vibration-Induced Insulin Aggregation10.1007/BF00304853 ↗
19. Insulin Compatibility with Polymer Materials Used in External Pump Infusion Systems10.1111/j.1464-5491.1988.tb00977.x ↗
20. Study of the Aggregation of Human Insulin Langmuir Monolayer10.1021/la204201w ↗
21. Kinetics of Insulin Aggregation in Aqueous Solutions upon Agitation in the Presence of Hydrophobic Surfaces10.1073/pnas.88.21.9377 ↗
22. Probing the Mechanism of Insulin Aggregation during Agitation10.1016/j.ijpharm.2011.04.024 ↗
23. Aggregation of Insulin at the Interface10.1021/jp4101202 ↗
24. Chemical Structure and Physical Properties of Cyclic Olefin Copolymers (IUPAC Technical Report)10.1351/pac200577050801 ↗
25. Uses and Processing of Cyclic Olefin Copolymers
26. Optical Properties of Cyclic Olefin Copolymers10.1117/1.1369411 ↗
27. New Plastics for Old Vials
28. Packaging Considerations for Biopreservation10.1159/000326083 ↗
29. Mlejnek, P. (2007). Cycloolefin Copolymers: Processing, Properties Application. [Bachelor’s Thesis, Univerzita Tomase Bati ve Zline].
30. Mahmood, H., Dorigato, A., and Pegoretti, A. (2020). Healable Carbon Fiber-Reinforced Epoxy/Cyclic Olefin Copolymer Composites. Materials, 13.10.3390/ma13092165 ↗
31. Thermal Mending in Novel Epoxy/Cyclic Olefin Copolymer Blends10.3144/expresspolymlett.2020.31 ↗
32. Optimization of the Thermal Mending Process in Epoxy/Cyclic Olefin Copolymer Blends10.1002/app.49937 ↗
33. Sorption of Organic Solvents by Packaging Materials: Polyethylene Terephthalate and TOPAS®10.1016/j.polymertesting.2004.09.004 ↗
34. INJECTABLES: Plastic Pre-Fillable Syringes and Vials: Progress Towards a Wider Acceptance
35. Evaluation of CZ-Resin Vials for Packaging Protein-Based Parenteral Formulations10.1016/S0378-5173(02)00641-5 ↗
36. Cycloolefin-Copolymer/Polyethylene (COC/PE) Blend Assists with the Creation of New Articular Cartilage10.1002/masy.201050811 ↗
37. Effect of Norbornene Content on Deformation Properties and Hot Embossing of Cyclic Olefin Copolymers10.1007/s10853-010-4585-2 ↗
38. Cristallini, C., Danti, S., Azimi, B., Tempesti, V., Ricci, C., Ventrelli, L., Cinelli, P., Barbani, N., and Lazzeri, A. (2019). Multifunctional Coatings for Robotic Implanted Device. Int. J. Mol. Sci., 20.10.3390/ijms20205126 ↗
39. Additive Manufacturing Approaches for Hydroxyapatite-Reinforced Composites10.1002/adfm.201903055 ↗
40. Stress-Strain Behaviour, Microhardness, and Dynamic Mechanical Properties of a Series of Ethylene-Norbornene Copolymers10.1002/1521-3935(20010801)202:12<2547::AID-MACP2547>3.0.CO;2-X ↗
41. Thermal Degradation Studies of Cyclic Olefin Copolymers10.1016/S0141-3910(03)00089-2 ↗
42. Allen, N. (1983). Degradation and Stabilization of Polyolefins, Applied Science Publishers.
43. Herman, F. (2007). Encyclopedia of Polymer Science and Technology, Wiley–Blackwell. [3rd ed.].
44. Effect of Environmental Factors on the Kinetics of Insulin Fibril Formation: Elucidation of the Molecular Mechanism10.1021/bi002555c ↗
45. Hydrophilic Surface Modification of Cyclic Olefin Copolymer Microfluidic Chips Using Sequential Photografting10.1002/jssc.200600515 ↗