Characterization of Ag-Ion Releasing Zeolite Filled 3D Printed Resins
Source abstract
Abstract
There has been profound growth in the use of 3D printed materials in dentistry in general, including orthodontics. The opportunity to impart antimicrobial properties to 3D printed parts from existing resins requires the capability of forming a stable colloid incorporating antimicrobial fillers. The objective of this research was to characterize a colloid consisting of a 3D printable resin mixed with Ag-ion releasing zeolites and fumed silica to create 3D printed parts with antiviral properties. The final composite was tested for antiviral properties against SARS-CoV-2 and HIV-1. Antiviral activity was measured in terms of the half-life of SARS-CoV-2 and HIV-1 on the composite surface. The inclusion of the zeolite did not interfere with the kinetics measured on the surface of the ATR crystal. While the depth of cure, measured following ISO4049 guidelines, was reduced from 3.8 mm to 1.4 mm in 5 s, this greatly exceeded the resolution required for 3D printing. The colloid was stable for at least 6 months and the rheological behavior was dependent upon the fumed silica loading. The inclusion of zeolites and fumed silica significantly increased the flexural strength of the composite as measured by a 3 point bend test. The composite released approximately 2500 μg/L of silver ion per gram of composite as determined by potentiometry. There was a significant reduction of the average half-life of SARS-CoV-2 (1.9 fold) and HIV-1 (2.7 fold) on the surface of the composite. The inclusion of Ag-ion releasing zeolites into 3D-printable resin can result in stable colloids that generate composites with improved mechanical properties and antiviral properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Research and COVID-19 · Dental materials and restorations · Facial Trauma and Fracture Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Oral Biology, School of Dentistry, Creighton University, Omaha, NE 68178, USA
Department of Medical Microbiology and Immunology, Creighton University, Omaha, NE 68178, USA
Department of Chemistry, College of Arts and Sciences, Creighton University, Omaha, NE 68178, USA
Funding
Creighton Haddix Foundation
References (100+)
Show source-provided references
1. 3D printing with polymers: Challenges among expanding options and opportunities10.1016/j.dental.2015.09.018 ↗
2. 3D printing in dentistry—Exploring the new horizons10.1016/j.jds.2021.04.004 ↗
3. A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications10.1155/2021/9950131 ↗
4. 3D printing restorative materials using a stereolithographic technique: A systematic review10.1016/j.dental.2020.11.030 ↗
5. The expanding domains of 3D printing pertaining to the specialty of orthodontics10.1016/j.matpr.2021.09.124 ↗
6. Schweiger, J., Edelhoff, D., and Güth, J. (2021). 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing. J. Clin. Med., 10.10.3390/jcm10092010 ↗
7. Three-dimensional printing biotechnology for the regeneration of the tooth and tooth-supporting tissues10.1002/bit.26882 ↗
8. Physical and surface properties of a 3D-printed composite resin for a digital workflow10.1016/j.prosdent.2020.03.029 ↗
9. 3D printing dental composite resins with sustaining antibacterial ability10.1007/s10853-018-2801-7 ↗
10. 3D-Printable Antimicrobial Composite Resins10.1002/adfm.201502384 ↗
11. Evaluation of Electrical Characteristics for PMMA-TiO2 Nanocomposites Used in Dentistry10.37358/RC.18.1.6064 ↗
12. Additive manufacturing technologies for processing zirconia in dental applications
13. Oral viral infections and the therapeutic use of antiviral agents in dentistry
14. Alkattan, R., Rojo, L., and Deb, S. (2021). Antimicrobials in Dentistry. Appl. Sci., 11.10.3390/app11073279 ↗
15. Novel Biomaterials and Technologies for the Dental, Oral, and Craniofacial Structures10.1177/0022034514556537 ↗
16. Metal-Based Nanomaterials in Biomedical Applications: Antimicrobial Activity and Cytotoxicity Aspects10.1002/adfm.201910021 ↗
17. Song, W., and Ge, S. (2019). Application of antimicrobial nanoparticles in dentistry. Molecules, 24.10.3390/molecules24061033 ↗
18. Emerging nanomaterials for dental treatments10.1042/ETLS20200195 ↗
19. Nanometals in Dentistry: Applications and Toxicological Implications—a Systematic Review10.1007/s12011-019-01986-y ↗
20. Nanoparticle technology and its implications in endodontics: A review10.1186/s40824-020-00198-z ↗
21. Nanotechnology in dentistry: Present and future perspectives on dental nanomaterials10.1016/j.dental.2020.08.006 ↗
22. Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry10.1016/j.actbio.2019.09.025 ↗
23. Review of titanium surface modification techniques and coatings for antibacterial applications10.1016/j.actbio.2018.10.036 ↗
24. Fernandez, C., Sokolonski, A., Fonseca, M., Stanisic, D., Araújo, D., Azevedo, V., Portela, R., and Tasic, L. (2021). Applications of Silver Nanoparticles in Dentistry: Advances and Technological Innovation. Int. J. Mol. Sci., 22.10.3390/ijms22052485 ↗
25. Mechanisms of Resistance to Silver Nanoparticles in Endodontic Bacteria: A Literature Review
26. Silver Nanoparticles in Alveolar Bone Surgery Devices10.1155/2012/975842 ↗
27. Silver Nanoparticles in Dental Biomaterials
28. Silver nanoparticles in dentistry10.1016/j.dental.2017.07.002 ↗
29. Silver nanoparticles: Synthesis, characterisation and biomedical applications10.1515/biol-2020-0094 ↗
30. The antibacterial mechanism of silver nanoparticles and its application in dentistry10.2147/IJN.S246764 ↗
31. Toxicology of antimicrobial nanoparticles for prosthetic devices
32. Talapko, J., Matijević, T., Juzbašić, M., Antolović-Požgain, A., and Škrlec, I. (2020). Antibacterial activity of silver and its application in dentistry, cardiology and dermatology. Microorganisms, 8.10.3390/microorganisms8091400 ↗
33. Capping Agent-Dependent Toxicity and Antimicrobial Activity of Silver Nanoparticles: An In Vitro Study. Concerns about Potential Application in Dental Practice10.7150/ijms.16011 ↗
34. Zannella, C., Shinde, S., Vitiello, M., Falanga, A., Galdiero, E., Fahmi, A., Santella, B., Nucci, L., Gasparro, R., and Galdiero, M. (2020). Antibacterial Activity of Indolicidin-Coated Silver Nanoparticles in Oral Disease. Appl. Sci., 10.10.3390/app10051837 ↗
35. Antibacterial nanosilver coated orthodontic bands with potential implications in dentistry
36. Antibiofilm efficacy of biosynthesized silver nanoparticles against endodontic-periodontal pathogens: An in vitro study10.4103/JCD.JCD_203_18 ↗
37. Antimicrobial activity of silver nanoparticle colloids of different sizes and shapes against Streptococcus mutans10.1007/s11164-017-2969-5 ↗
38. Antimicrobial and Substantivity Properties of Silver Nanoparticles against Oral Microbiomes Clinically Isolated from Young and Young-Adult Patients
39. Biogenic synthesis and antimicrobial activity of silica-coated silver nanoparticles for esthetic dental applications10.1016/j.jdent.2020.103327 ↗
40. Juan Carlos, F.-A., Rene, G.-C., Germán, V.-S., and Laura Susana, A.-T. (2020). Antimicrobial Poly (methyl methacrylate) with Silver Nanoparticles for Dentistry: A Systematic Review. Appl. Sci., 10.10.3390/app10114007 ↗
41. In Vitro Assessment of the Antimicrobial Activity of a Local Sustained Release Device Containing Amine Fluoride for the Treatment of Oral Infectious Diseases10.1016/S0732-8893(97)00208-3 ↗
42. The synthesis of nano silver-graphene oxide system and its efficacy against endodontic biofilms using a novel tooth model10.1016/j.dental.2019.08.105 ↗
43. Cytotoxicity and release ions of endodontic sealers incorporated with a silver and vanadium base nanomaterial10.1007/s10266-020-00507-x ↗
44. Del Pilar Rodriguez-Torres, M., Díaz-Torres, L., Millán-Chiu, B., García-Contreras, R., Hernández-Padrón, G., and Acosta-Torres, L. (2020). Antifungal and Cytotoxic Evaluation of Photochemically Synthesized Heparin-Coated Gold and Silver Nanoparticles. Molecules, 25.10.3390/molecules25122849 ↗
45. A comparative study on the antimicrobial activity of irreversible hydrocolloid mixed with silver nanoparticles and chlorhexidine10.4103/1735-3327.280892 ↗
46. Antimicrobial effects of silver nanoparticles and extracts of Syzygium cumini flowers and seeds: Periodontal, cariogenic and opportunistic pathogens10.1016/j.archoralbio.2021.105101 ↗
47. Antimicrobial and mechanical effects of zeolite use in dental materials: A systematic review10.15644/asc55/1/9 ↗
48. Novel dental adhesive containing silver exchanged EMT zeolites against cariogenic biofilms to combat dental caries10.1016/j.micromeso.2020.110113 ↗
49. Assessment of the Antiviral Properties of Zeolites Containing Metal Ions10.1007/s12560-008-9006-1 ↗
50. Calcium-silicate mesoporous nanoparticles loaded with chlorhexidine for both anti- Enterococcus faecalis and mineralization properties10.1186/s12951-016-0224-7 ↗
51. Seneviratne, C.J., Leung, K.C.-F., Wong, C.-H., Lee, S.-F., Li, X., Leung, P.C., Lau, C., Wat, E., and Jin, L. (2014). Nanoparticle-encapsulated chlorhexidine against oral bacterial biofilms. PLoS ONE, 9.10.1371/journal.pone.0103234 ↗
52. Nanoparticles for controlled delivery and sustained release of chlorhexidine in the oral environment10.1111/odi.12328 ↗
53. Use of magnetic nanoparticles as a drug delivery system to improve chlorhexidine antimicrobial activity10.2147/IJN.S140661 ↗
54. Recent advances of gold nanoparticles as biomaterial in dentistry10.1016/j.ijpharm.2020.119596 ↗
55. Mechanism and Factors Influence of Graphene-based Nanomaterials Antimicrobial Activities and Application in Dentistry10.1016/j.jmrt.2021.01.093 ↗
56. Antimicrobial activity of nanoparticle-based dental fillers on novel chromogenic bacteria Enterobacter ludwigii10.1088/2053-1591/ab2262 ↗
57. Killing Dental Pathogens Using Antibacterial Graphene Oxide10.1021/acsami.5b01069 ↗
58. The effect of magnesium oxide nanoparticles on the antibacterial and antibiofilm properties of glass-ionomer cement10.1016/j.heliyon.2019.e02568 ↗
59. Nikolova, M., and Chavali, M. (2020). Metal oxide nanoparticles as biomedical materials. Biomimetics, 5.10.3390/biomimetics5020027 ↗
60. Antibacterial quaternary ammonium compounds in dental materials: A systematic review10.1016/j.dental.2018.03.014 ↗
61. Quaternary ammonium compounds in dental restorative materials10.4012/dmj.2017-096 ↗
62. Antimicrobial properties of conventional restorative filling materials and advances in antimicrobial properties of composite resins and glass ionomer cements—A literature review10.1016/j.dental.2014.12.005 ↗
63. The use of quaternary ammonium to combat dental caries10.3390/ma8063532 ↗
64. Biosynthesized selenium nanoparticles: Characterization, antimicrobial, and antibiofilm activity against Enterococcus faecalis10.7717/peerj.11653 ↗
65. Peptide-functionalized zirconia and new zirconia/titanium biocermets for dental applications10.1016/j.jdent.2015.06.002 ↗
66. Antibacterial glass-ionomer cement restorative materials: A critical review on the current status of extended release formulations10.1016/j.jconrel.2017.07.041 ↗
67. On the possibility of incorporating antimicrobial components into glass-ionomer cements
68. Antimicrobial activity and tightness of a DCPD-CaO-based hydraulic calcium phosphate cement for root canal filling
69. Multifunctional ceramic-metal biocomposites with zinc containing antimicrobial glass coatings10.1016/j.ceramint.2016.01.090 ↗
70. Nanocrystalline Tetracalcium Phosphate Cement10.1177/154405910408300514 ↗
71. Cicciu, M., Fiorillo, L., and Cervino, G. (2019). Chitosan Use in Dentistry: A Systematic Review of Recent Clinical Studies. Mar. Drugs, 17.10.3390/md17070417 ↗
72. Injectable MMP-Responsive Nanotube-Modified Gelatin Hydrogel for Dental Infection Ablation10.1021/acsami.9b22964 ↗
73. Thermosensitive hydrogel for periodontal application: In vitro drug release, antibacterial activity and toxicity evaluation10.1177/0885328215614191 ↗
74. In vitro investigation of antimicrobial effects, nanohardness, and cytotoxicity of different glass ionomer restorative materials in dentistry10.4103/njcp.njcp_429_18 ↗
75. Silver nanoparticles fabricated in Hepes buffer exhibit cytoprotective activities toward HIV-1 infected cells10.1039/b510984a ↗
76. Silver nanoparticles inhibit hepatitis B virus replication10.1177/135965350801300210 ↗
77. Inhibitory effects of silver nanoparticles against adenovirus type 3 in vitro10.1016/j.jviromet.2013.07.020 ↗
78. Inhibitory effects of silver nanoparticles on H1N1 influenza A virus in vitro10.1016/j.jviromet.2011.09.003 ↗
79. Potent antiviral effect of silver nanoparticles on SARS-CoV-210.1016/j.bbrc.2020.09.018 ↗
80. Warnes, S.L., and Keevil, C.W. (2013). Inactivation of norovirus on dry copper alloy surfaces. PLoS ONE, 8.10.1371/journal.pone.0075017 ↗
81. Oral Mucosa, Saliva, and COVID-19 Infection in Oral Health Care10.3389/fmed.2021.656926 ↗
82. Saliva is a non-negligible factor in the spread of COVID-1910.1111/omi.12289 ↗
83. Challenges and possible solutions in dental practice during and post COVID-1910.1007/s11356-020-10983-x ↗
84. COVID-19 Dentistry-Related Aspects: A Literature Overview10.1111/idj.12601 ↗
85. Shamsoddin, E., DeTora, L., Tovani-Palone, M., and Bierer, B. (2021). Dental Care in Times of the COVID-19 Pandemic: A Review. Med. Sci., 9.10.3390/medsci9010013 ↗
86. Dentistry and the COVID-19 Outbreak10.1016/j.identj.2020.12.010 ↗
87. Barabari, P., and Moharamzadeh, K. (2020). Novel coronavirus (COVID-19) and dentistry–A comprehensive review of literature. Dent. J., 8.10.3390/dj8020053 ↗
88. Bordea, I.R., Xhajanka, E., Candrea, S., Bran, S., Onișor, F., Inchingolo, A.D., Malcangi, G., Pham, V.H., Inchingolo, A.M., and Scarano, A. (2020). Coronavirus (SARS-CoV-2) Pandemic: Future Challenges for Dental Practitioners. Microorganisms, 8.10.3390/microorganisms8111704 ↗
89. Reducing the Risk of COVID-19 Transmission in Dental Offices: A Review10.1111/jopr.13261 ↗
90. A clinical investigation of dental evacuation systems in reducing aerosols10.1016/j.adaj.2021.02.013 ↗
91. Is there an association between oral health and severity of COVID-19 complications?10.1016/j.bj.2020.05.016 ↗
92. Can extraoral suction units minimize droplet spatter during a simulated dental procedure?10.1016/j.adaj.2020.10.010 ↗
93. Butera, A., Maiorani, C., Natoli, V., Bruni, A., Coscione, C., Magliano, G., Giacobbo, G., Morelli, A., Moressa, S., and Scribante, A. (2020). Bio-Inspired Systems in Nonsurgical Periodontal Therapy to Reduce Contaminated Aerosol during COVID-19: A Comprehensive and Bibliometric Review. J. Clin. Med., 9.10.3390/jcm9123914 ↗
94. Managing dental caries against the backdrop of COVID-19: Approaches to reduce aerosol generation10.1038/s41415-020-2153-y ↗
95. Methods to mitigate infection spread from aerosol-generating dental procedures10.1002/JPER.20-0567 ↗
96. Possible aerosol transmission of COVID-19 and special precautions in dentistry10.1631/jzus.B2010010 ↗
97. Saliva and COVID 19: Current dental perspective10.4103/jomfp.jomfp_63_21 ↗
98. Aerosol and spatter mitigation in dentistry: Analysis of the effectiveness of 13 setups10.1111/jerd.12717 ↗
99. Ahmed, M., and Jouhar, R. (2021). Dissemination of aerosol and splatter in clinical environment during cavity preparation: An in vitro study. Int. J. Environ. Res. Public Health, 18.10.3390/ijerph18073773 ↗
100. First Case of 2019 Novel Coronavirus in the United States10.1056/NEJMoa2001191 ↗