Improve Dentin Bonding Performance Using a Hydrolytically Stable, Ether-Based Primer
Source abstract
Abstract
The objective of this study is to replace a traditional methacrylate-based primer (glycine, N-(2-hydroxy-3-(2-methyl-1-oxo-2-propenyl)propyl)-N-(4-methylphenyl) monosodium salt, NTG-GMA) with a hydrolytically stable ether-based primer (glycine, N-2-hydroxy-3-(4-vinylbenzyloxy)-propyl-N-(4-methylphenyl), monosodium salt, NTG-VBGE). The performance and durability of bonding composites to detin of two primers combined with methacrylate-based or ether-based adhesives were evaluated using shear bond strength (SBS) and micro-tensile bond strength (μTBS) combined with thermal cycling. The hydrolysis resistance of NTG-VBGE against hydrolysis was tested by challenging primed hydroxyapatite crystals with an esterase. The hydrophilicity of the primers and the resin spreading kinetics of adhesives on primed dentin were characterized by water contact angle measurements. The new primer NTG-VBGE was found to be compatible with both methacrylate-based adhesives and ether-based adhesives. The highest μTBS values were found in the test group of NTG-VBGE and ether-based adhesive, which was consistent with the resin spreading kinetics results. The more hydrophobic and hydrolytically stable primer/adhesive achieved improved dentin infiltration and bonding strength, suggesting significant potential for further developing dental restorative materials with extended service life.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Orthodontics and Dentofacial Orthopedics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
American Dental Association Science & Research Institute, Gaithersburg, MD 20899, USA
Research Center for Electron Photon Science, Tohoku University, Sendai 982-0826, Japan
The Forsyth Institute, Cambridge, MA 02142, USA
Harvard School of Dental Medicine, Boston, MA 02115, USA
Funding
NIH
References (56)
Show source-provided references
1. Resin composite-State of the art10.1016/j.dental.2010.10.020 ↗
2. A review of the biomaterials technologies for infection-resistant surfaces10.1016/j.biomaterials.2013.07.089 ↗
3. Universal dental adhesives: Current status, laboratory testing, and clinical performance10.1002/jbm.b.34305 ↗
4. Dental adhesion review: Aging and stability of the bonded interface10.1016/j.dental.2007.02.009 ↗
5. Adhesion testing of dentin bonding agents: A review10.1016/0109-5641(95)80046-8 ↗
6. Recent developments in dentin bonding
7. Dentin bonding systems: From dentin collagen structure to bond preservation and clinical applications10.1016/j.dental.2017.11.005 ↗
8. Clinical long-term retention of etch-and-rinse and self-etch adhesive systems in non-carious cervical lesions a 13 years evaluation10.1016/j.dental.2006.10.005 ↗
9. A Critical Review of the Durability of adhesion to tooth tissue: Methods and results10.1177/154405910508400204 ↗
10. Effects of resin hydrophilicity on dentin bond strength10.1177/154405910608501108 ↗
11. Interfacial chemistry of the dentin/adhesive bond10.1177/00220345000790070501 ↗
12. Chemical profile of adhesive/caries-affected dentin interfaces using Raman microspectroscopy
13. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy10.1016/S0142-9612(03)00262-X ↗
14. Long-term durability of dental adhesives10.1007/s40496-015-0070-y ↗
15. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins10.1016/S0142-9612(02)00380-0 ↗
16. Esterase from a cariogenic bacterium hydrolyzes dental resins10.1016/j.actbio.2018.02.020 ↗
17. Effect of resin hydrophilicity and water storage on resin strength10.1016/j.biomaterials.2004.01.026 ↗
18. The influence of water storage and C-factor on the dentin–resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin10.1016/S0109-5641(00)00081-6 ↗
19. Development of an adhesive bonding system
20. Adhesion of polycarboxylate-based dental cements to enamel: An in vivo study10.1177/00220345860650060301 ↗
21. New Surface-active comonomer for adhesive bonding10.1177/00220345960750011501 ↗
22. Preparation of Dental Resins Resistant to Enzymatic and Hydrolytic Degradation in Oral Environments10.1021/acs.biomac.5b01069 ↗
23. A composition-controlled cross-linking resin network through rapid visible-light photo-copolymerization10.1039/C6PY00606J ↗
24. Synthesis and evaluation of novel siloxane-methacrylate monomers used as dentin adhesives10.1016/j.dental.2014.06.004 ↗
25. Ester-free thiol-ene dental restoratives-Part A: Resin development10.1016/j.dental.2015.08.148 ↗
26. Ester-free thiol–ene dental restoratives—Part B: Resin development10.1016/j.dental.2015.08.147 ↗
27. Recent developments of new components for dental adhesives and composites10.1002/mame.200600414 ↗
28. Multifunctional monomer acts as co-initiator and crosslinker to provide autonomous strengthening with enhanced hydrolytic stability in dental adhesives10.1016/j.dental.2019.11.007 ↗
29. Fabrication of hybrid crosslinked network with buffering capabilities and autonomous strengthening characteristics for dental adhesives10.1016/j.actbio.2017.12.001 ↗
30. New silyl-functionalized BisGMA provides autonomous strengthening without leaching for dental adhesives10.1016/j.actbio.2018.10.033 ↗
31. Novel urethane-based polymer for dental applications with decreased monomer leaching10.1016/j.msec.2016.11.050 ↗
32. High-performance dental adhesives containing an ether-based monomer10.1177/0022034519895269 ↗
33. High performance dental resin composites with hydrolytically stable monomers10.1016/j.dental.2017.10.007 ↗
34. Effect of thermal cycling on whisker-reinforced dental resin composites10.1023/A:1016504530133 ↗
35. Hydrolysis of choline esters by liver10.1126/science.101.2624.385 ↗
36. Salivary esterase activity and its association with the biodegradation of dental composites10.1177/154405910408300105 ↗
37. Short-time dental resin biostability and kinetics of enzymatic degradation10.1016/j.actbio.2018.05.009 ↗
38. Effects of dentin depth and cavity configuration on bond strength10.1177/00220345990780041001 ↗
39. Direct comparison of the bond strength results of the different test methods: A critical literature review10.1016/j.dental.2009.12.002 ↗
40. Shear bond strength and interface analysis between a resin composite and a recent high-viscous glass ionomer cement bonded with various adhesive systems10.1007/s00784-018-2678-5 ↗
41. Contact angle of dentin bonding agents on the dentin surface10.4012/dmj.15.39 ↗
42. The impact of contact angle on the biocompatibility of biomaterials10.1097/OPX.0b013e3181da863e ↗
43. A review on the wettability of dental implant surfaces II: Biological and clinical aspects10.1016/j.actbio.2014.03.032 ↗
44. State of the art etch-and-rinse adhesives10.1016/j.dental.2010.10.016 ↗
45. State of the art of self-etch adhesives10.1016/j.dental.2010.10.023 ↗
46. Dentin bonding: Can we make it last?10.2341/14-095-BL ↗
47. Contact angle, wetting, and adhesion: A critical review10.1163/156856192X00629 ↗
48. The tooth: Its structure and properties
49. Hydroxyapatite Pellets as Versatile Model Surfaces for Systematic Adhesion Studies on Enamel: A Force Spectroscopy Case Study10.1021/acsbiomaterials.1c00925 ↗
50. Solution activity product (KFAP) and simultaneous demineralization–remineralization in bovine tooth enamel and hydroxyapatite pellets10.1002/jps.2600721104 ↗
51. An in vitro model of chlorhexidine-induced tooth staining10.1111/j.1600-0765.2005.00791.x ↗
52. Synthesis of hydroxyapatite substrates: Bridging the gap between model surfaces and enamel10.1021/acsami.6b10089 ↗
53. Shear vs. Tensile Bond Strength of Resin Composite Bonded to Ceramic10.1177/00220345950740091401 ↗
54. Shear and tensile bond testing for resin cement evaluation10.1016/0109-5641(95)80024-7 ↗
55. Analysis of dental shear bond strength tests, shear or tensile?10.1016/0143-7496(95)00029-1 ↗
56. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review10.1016/j.jmbbm.2013.09.013 ↗