journal article·2022-08-29Open access

The Effect of an Er, Cr: YSGG Laser Combined with Implantoplasty Treatment on Implant Surface Roughness and Morphologic Analysis: A Pilot In Vitro Study

Chih-Jen Lin, Ming-Hsu Tsai, Yu-Ling Wu, Hsuan Lung, Hung-Shyong Chen, Aaron Yu-Jen Wu

Abstract

Although laser irradiation and implantoplasty (IP) are both treatment options for peri-implantitis, no studies have yet combined these two treatment solutions. The aim of this study was to identify the effect of an Er, Cr: YSGG laser on the IP surface. In experiment 1, TiUnite anodized surface implants were treated with an Er, Cr: YSGG laser at 0.5 to 2 W on the panel energy setting and 20 Hz under water irrigation. In experiment 2, all implant surfaces were treated with the IP procedure first, then irradiated with the Er, Cr: YSGG laser. All samples were analyzed by stereomicroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and surface topography. Stereomicroscopy and SEM revealed no obvious surface change at any energy setting once the surface was polished with the IP procedure, whereas damage was caused to the TiUnite original implant surface when the Er, Cr: YSGG laser panel energy was set at 1 W or higher. EDS showed no significant difference in element composition once the surface was polished with the IP procedure, while a compositional change was detected when the Er, Cr: YSGG laser panel energy was set to 0.5 W or higher to irradiate the original TiUnite surface. Surface roughness may be related to laser irradiation energy, but no significant changes occurred following IP. These results indicated that the Er, Cr: YSGG laser may have little effect on the post-IP surface compared with the virgin TiUnite surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Dental materials and restorations · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Dentistry, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, Kaohsiung 833, Taiwan

Department of Mechanical Engineering, Cheng Shiu University, Kaohsiung 833, Taiwan

Center for Environmental Toxin and Emerging-Contaminant Research, Cheng Shiu University, Kaohsiung 833, Taiwan

Funding

Chang Gung Medical Foundation and Cheng Shiu University

References (38)

Show source-provided references
1. Evaluation of survival and success rates of dental implants reported in longitudinal studies with a follow-up period of at least 10 years: A systematic review10.1016/j.ijom.2014.10.023 ↗
2. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw10.1016/S0300-9785(81)80077-4 ↗
3. Peri-implant diseases and conditions: Consensus report of workgroup 4 of the 2017 World Workshop on the Classification of Periodontal and Peri-Implant Diseases and Conditions10.1111/jcpe.12957 ↗
4. Factors associated with early and late failure of dental implants10.1111/j.2041-1626.2012.00162.x ↗
5. Peri-implantitis10.1002/JPER.16-0350 ↗
6. Peri-implant diseases: Consensus report of the sixth European workshop on periodontology10.1111/j.1600-051X.2008.01283.x ↗
7. Peri-implant mucositis and peri-implantitis: A current understanding of their diagnoses and clinical implications10.1902/jop.2013.134001 ↗
8. Peri-implant health and disease. A systematic review of current epidemiology10.1111/jcpe.12334 ↗
9. Peri-implant tissue destruction. The third EAO consensus conference 201210.1111/j.1600-0501.2012.02555.x ↗
10. Non-surgical management of peri-implant diseases10.1308/205016814812736772 ↗
11. Effects of the Er:YAG laser irradiation on titanium implant materials and contaminated implant abutment surfaces10.1089/10445470360516680 ↗
12. Optimal Er:YAG laser irradiation parameters for debridement of microstructured fixture surfaces of titanium dental implants10.1007/s10103-012-1171-7 ↗
13. Bactericidal effect of the Er:YAG laser on dental implant surfaces: An in vitro study10.1902/jop.2002.73.11.1292 ↗
14. Alagl, A.S., Madi, M., Bedi, S., Al Onaizan, F., and Al-Aql, Z.S. (2019). The Effect of Er,Cr:YSGG and Diode Laser Applications on Dental Implant Surfaces Contaminated with Acinetobacter Baumannii and Pseudomonas Aeruginosa. Materials, 12.10.3390/ma12132073 ↗
15. In vitro studies on laser scaling of subgingival calculus with an erbium:YAG laser10.1902/jop.1994.65.12.1097 ↗
16. Scarano, A., Lorusso, F., Inchingolo, F., Postiglione, F., and Petrini, M. (2020). The Effects of Erbium-Doped Yttrium Aluminum Garnet Laser (Er: YAG) Irradiation on Sandblasted and Acid-Etched (SLA) Titanium, an In Vitro Study. Materials, 13.10.3390/ma13184174 ↗
17. Laser application in non-surgical periodontal therapy: A systematic review10.1111/j.1600-051X.2008.01259.x ↗
18. Periodontal and peri-implant wound healing following laser therapy10.1111/prd.12080 ↗
19. Effective removal of calcified deposits on microstructured titanium fixture surfaces of dental implants with erbium lasers10.1002/JPER.17-0389 ↗
20. Treatment of the contaminated implant surface using the Er,Cr:YSGG laser10.1097/01.ID.0000127521.06443.0B ↗
21. Chegeni, E., Espana-Tost, A., Figueiredo, R., Valmaseda-Castellon, E., and Arnabat-Dominguez, J. (2020). Effect of an Er,Cr:YSGG Laser on the Surface of Implants: A Descriptive Comparative Study of 3 Different Tips and Pulse Energies. Dent. J., 8.10.3390/dj8040109 ↗
22. Impact of the method of surface debridement and decontamination on the clinical outcome following combined surgical therapy of peri-implantitis: A randomized controlled clinical study10.1111/j.1600-051X.2010.01690.x ↗
23. Impact of defect configuration on the clinical outcome following surgical regenerative therapy of peri-implantitis10.1111/j.1600-051X.2010.01540.x ↗
24. Therapy of peri-implantitis with resective surgery. A 3-year clinical trial on rough screw-shaped oral implants. Part I: Clinical outcome10.1111/j.1600-0501.2004.01084.x ↗
25. The influence of implantoplasty on the diameter, chemical surface composition, and biocompatibility of titanium implants10.1007/s00784-016-2030-x ↗
26. Surface analysis of failed oral titanium implants10.1002/(SICI)1097-4636(1999)48:4<559::AID-JBM23>3.0.CO;2-M ↗
27. Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet Laser Effectively Ablates Single-Species Biofilms on Titanium Disks Without Detectable Surface Damage10.1902/jop.2016.160529 ↗
28. Bactericidal efficacy of Er,Cr:YSGG laser irradiation against Enterococcus faecalis compared with NaOCl irrigation: An ex vivo pilot study10.1111/j.1365-2591.2006.01190.x ↗
29. Micro-morphometric assessment of titanium plasma-sprayed coating removal using burs for the treatment of peri-implant disease
30. Surface roughness of dental implants and treatment time using six different implantoplasty procedures10.1111/clr.12682 ↗
31. Analysis of Effectiveness of Different Rotational Instruments in Implantoplasty: An In Vitro Study10.1097/ID.0000000000000381 ↗
32. The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis10.1034/j.1600-0501.1996.070302.x ↗
33. The influence of titanium abutment surface roughness on plaque accumulation and gingivitis: Short-term observations
34. Surface quality after implantoplasty
35. The effect of standardised implantoplasty protocol on titanium surface roughness: An in-vitro study
36. Effect of implantoplasty on fracture resistance and surface roughness of standard diameter dental implants10.1111/clr.13037 ↗
37. Mechanical and biological complications after implantoplasty-A systematic review10.1111/clr.13499 ↗
38. Fracture resistance after implantoplasty in three implant-abutment connection designs