journal article·2024-11-21Open access

Impact of Particle Size and Sintering Temperature on Calcium Phosphate Gyroid Structure Scaffolds for Bone Tissue Engineering

Romina Haydeé Aspera-Werz, Guanqiao Chen, Lea Schilonka, Islam Bouakaz, Catherine Bronne, Elisabeth Cobraiville, Grégory Nolens, Andreas Nussler

Journal of Functional Biomaterials· Volume 15· Issue 12

Abstract

Due to the chemical composition and structure of the target tissue, autologous bone grafting remains the gold standard for orthopedic applications worldwide. However, ongoing advancements in alternative grafting materials show that 3D-printed synthetic biomaterials offer many advantages. For instance, they provide high availability, have low clinical limitations, and can be designed with a chemical composition and structure comparable to the target tissue. This study aimed to compare the influences of particle size and sintering temperature on the mechanical properties and biocompatibility of calcium phosphate (CaP) gyroid scaffolds. CaP gyroid scaffolds were fabricated by 3D printing using powders with the same chemical composition but different particle sizes and sintering temperatures. The physicochemical characterization of the scaffolds was performed using X-ray diffractometry, scanning electron microscopy, and microtomography analyses. The immortalized human mesenchymal stem cell line SCP-1 (osteoblast-like cells) and osteoclast-like cells (THP-1 cells) were seeded on the scaffolds as mono- or co-cultures. Bone cell attachment, number of live cells, and functionality were assessed at different time points over a period of 21 days. Improvements in mechanical properties were observed for scaffolds fabricated with narrow-particle-size-distribution powder. The physicochemical analysis showed that the microstructure varied with sintering temperature and that narrow particle size distribution resulted in smaller micropores and a smoother surface. Viable osteoblast- and osteoclast-like cells were observed for all scaffolds tested, but scaffolds produced with a smaller particle size distribution showed less attachment of osteoblast-like cells. Interestingly, low attachment of osteoclast-like cells was observed for all scaffolds regardless of surface roughness. Although bone cell adhesion was lower in scaffolds made with powder containing smaller particle sizes, the long-term function of osteoblast-like and osteoclast-like cells was superior in scaffolds with improved mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Siegfried Weller Research Institute, Department of Trauma and Reconstructive Surgery, Eberhard Karls University Tübingen, BG Trauma Center Tübingen, 72076 Tübingen, Germany

CERHUM-PIMW, 4000 Liège, Belgium

Funding

Deutsche Forschungsgemeinschaft · University of Tübingen

References (63)

Show source-provided references
1. Florencio-Silva, R., Sasso, G.R., Sasso-Cerri, E., Simões, M.J., and Cerri, P.S. (2015). Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells. BioMed Res. Int., 2015.10.1155/2015/421746 ↗
2. Šromová, V., Sobola, D., and Kaspar, P. (2023). A Brief Review of Bone Cell Function and Importance. Cells, 12.10.3390/cells12212576 ↗
3. The cell biology of bone metabolism10.1136/jcp.2007.048868 ↗
4. New insights on the reparative cells in bone regeneration and repair10.1111/brv.12659 ↗
5. Tarantino, U., Cariati, I., Greggi, C., Gasbarra, E., Belluati, A., Ciolli, L., Maccauro, G., Momoli, A., Ripanti, S., and Falez, F. (2021). Skeletal System Biology and Smoke Damage: From Basic Science to Medical Clinic. Int. J. Mol. Sci., 22.10.3390/ijms22126629 ↗
6. Ehnert, S., Aspera-Werz, R.H., Ihle, C., Trost, M., Zirn, B., Flesch, I., Schröter, S., Relja, B., and Nussler, A.K. (2019). Smoking Dependent Alterations in Bone Formation and Inflammation Represent Major Risk Factors for Complications Following Total Joint Arthroplasty. J. Clin. Med., 8.10.3390/jcm8030406 ↗
7. Delayed Fracture Healing in Diabetics with Distal Radius Fractures10.55095/achot2017/003 ↗
8. Low bone mass and severity of cholestasis affect fracture risk in patients with primary biliary cirrhosis10.1053/j.gastro.2010.02.016 ↗
10. Autologous bone graft: Is it still the gold standard?10.1016/j.injury.2021.01.043 ↗
11. Superiority of Triply Periodic Minimal Surface Gyroid Structure to Strut-Based Grid Structure in Both Strength and Bone Regeneration10.1021/acsami.3c06263 ↗
12. Surface curvatures of trabecular bone microarchitecture10.1016/S8756-3282(01)00672-X ↗
13. Structure, function, and self-assembly of single network gyroid (I4132) photonic crystals in butterfly wing scales10.1073/pnas.0909616107 ↗
14. Insect micro-morphology and its applications
15. Nitti, P., Padmanabhan, S.K., Cortazzi, S., Stanca, E., Siculella, L., Licciulli, A., and Demitri, C. (2021). Enhancing Bioactivity of Hydroxyapatite Scaffolds Using Fibrous Type I Collagen. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.631177 ↗
16. Ielo, I., Calabrese, G., De Luca, G., and Conoci, S. (2022). Recent Advances in Hydroxyapatite-Based Biocomposites for Bone Tissue Regeneration in Orthopedics. Int. J. Mol. Sci., 23.10.3390/ijms23179721 ↗
17. Sari, M., Hening, P., Chotimah, N., Ana, I.D., and Yusuf, Y. (2021). Bioceramic hydroxyapatite-based scaffold with a porous structure using honeycomb as a natural polymeric Porogen for bone tissue engineering. Biomater. Res., 25.10.1186/s40824-021-00203-z ↗
18. Mo, X., Zhang, D., Liu, K., Zhao, X., Li, X., and Wang, W. (2023). Nano-Hydroxyapatite Composite Scaffolds Loaded with Bioactive Factors and Drugs for Bone Tissue Engineering. Int. J. Mol. Sci., 24.10.3390/ijms24021291 ↗
19. Effect of particle size on the in vitro bioactivity, hydrophilicity and mechanical properties of bioactive glass-reinforced polycaprolactone composites10.1016/j.msec.2011.06.013 ↗
20. Bone tissue engineering scaffolding: Computer-aided scaffolding techniques10.1007/s40204-014-0026-7 ↗
21. Synthesis, sintering and characterization of porous nano-structured CaP bioceramics prepared by a two-step sintering method10.1016/j.ceramint.2014.12.018 ↗
22. The effect of sintering temperature on the microstructure and mechanical properties of a bioceramic bone scaffold10.1016/j.jmbbm.2011.07.015 ↗
23. Verbist, M., Vandevelde, A.L., Geusens, J., Sun, Y., Shaheen, E., and Willaert, R. (2024). Reconstruction of Craniomaxillofacial Bone Defects with 3D-Printed Bioceramic Implants: Scoping Review and Clinical Case Series. J. Clin. Med., 13.10.3390/jcm13102805 ↗
24. Microwave-processed nanocrystalline hydroxyapatite: Simultaneous enhancement of mechanical and biological properties10.1016/j.actbio.2010.03.016 ↗
25. The material and biological characteristics of osteoinductive calcium phosphate ceramics10.1093/rb/rbx024 ↗
26. 3D printed triply periodic minimal surfaces calcium phosphate bone substitute: The effect of porosity design on mechanical properties10.1016/j.ceramint.2023.10.238 ↗
27. 3D-Printed Synthetic Hydroxyapatite Scaffold With In Silico Optimized Macrostructure Enhances Bone Formation In Vivo10.1002/adfm.202105002 ↗
28. In vitro and in vivo biocompatibility of calcium-phosphate scaffolds three-dimensional printed by stereolithography for bone regeneration10.1002/jbm.a.36823 ↗
29. Guo, H., Weng, W., Zhang, S., Rinderknecht, H., Braun, B., Breinbauer, R., Gupta, P., Kumar, A., Ehnert, S., and Histing, T. (2022). Maqui Berry and Ginseng Extracts Reduce Cigarette Smoke-Induced Cell Injury in a 3D Bone Co-Culture Model. Antioxidants, 11.10.3390/antiox11122460 ↗
30. (2020). Particle Size Analysis—Laser Diffraction Methods (Standard No. ISO 13320:2020).
31. (2015). Implants for Surgery—HydroxyapatitePart 6: Powders (Standard No. ISO 13779-6:2015).
32. (2017). Technical Product Documentation—Edges of Undefined Shape—Indication and Dimensioning (Standard No. ISO 13715:2017).
33. Tobacco heating system has less impact on bone metabolism than cigarette smoke10.1016/j.fct.2023.113637 ↗
34. Finite element study of scaffold architecture design and culture conditions for tissue engineering10.1016/j.biomaterials.2009.07.041 ↗
35. A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography10.1016/j.biomaterials.2009.03.055 ↗
36. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting10.1016/j.jmbbm.2019.01.023 ↗
37. Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction10.1016/j.matdes.2017.11.050 ↗
38. Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study10.1016/j.matdes.2019.108165 ↗
39. Jaber, M., Poh, P.S.P., Duda, G.N., and Checa, S. (2022). PCL strut-like scaffolds appear superior to gyroid in terms of bone regeneration within a long bone large defect: An in silico study. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.995266 ↗
40. Ectopic osteogenesis and angiogenesis regulated by porous architecture of hydroxyapatite scaffolds with similar interconnecting structure in vivo10.1093/rb/rbw031 ↗
41. Potential of ceramic materials as permanently implantable skeletal prostheses10.1002/jbm.820040309 ↗
42. Porous scaffolds for bone regeneration10.1016/j.jsamd.2020.01.007 ↗
43. Effect of microporosity on scaffolds for bone tissue engineering10.1093/rb/rby001 ↗
44. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
45. Berretta, S., Ghita, O., Evans, K., Anderson, A., and Newman, C. (2014). Size, Shape and Flow of Powders for Use in Selective Laser Sintering (SLS), University of Exeter. Available online: https://core.ac.uk/reader/20551490.10.1201/b15961-11 ↗
46. Role of particle size on the cohesive strength of non-sintered (green) ceramics10.1016/j.colsurfa.2022.130653 ↗
47. Effect of particle size on the mechanical properties of reaction bonded boron carbide ceramics10.1016/j.ceramint.2012.06.089 ↗
48. Effects of initial particle size on mechanical, thermal, and electrical properties of porous SiC ceramics10.1016/j.ceramint.2020.11.238 ↗
49. Lebre, F., Sridharan, R., Sawkins, M.J., Kelly, D.J., O’Brien, F.J., and Lavelle, E.C. (2017). The shape and size of hydroxyapatite particles dictate inflammatory responses following implantation. Sci. Rep., 7.10.1038/s41598-017-03086-0 ↗
50. Trzaskowska, M., Vivcharenko, V., and Przekora, A. (2023). The Impact of Hydroxyapatite Sintering Temperature on Its Microstructural, Mechanical, and Biological Properties. Int. J. Mol. Sci., 24.10.3390/ijms24065083 ↗
51. Effect of the porogen content and the sintering temperature on the aperture of porous copper materials10.1088/2053-1591/ab17e7 ↗
52. Hydroxyapatite 3D-printed scaffolds with Gyroid-Triply periodic minimal surface porous structure: Fabrication and an in vivo pilot study in sheep10.1016/j.actbio.2023.08.041 ↗
53. Micropore-induced capillarity enhances bone distribution in vivo in biphasic calcium phosphate scaffolds10.1016/j.actbio.2016.08.025 ↗
54. Biomimetic gradient scaffold from ice-templating for self-seeding of cells with capillary effect10.1016/j.actbio.2015.04.007 ↗
55. A mechanism for effective cell-seeding in rigid, microporous substrates10.1016/j.actbio.2013.04.040 ↗
56. Functional and analytical recapitulation of osteoclast biology on demineralized bone paper10.1038/s41467-023-44000-9 ↗
57. Osteoclast and osteoblast responsive carbonate apatite coatings for biodegradable magnesium alloys10.1080/14686996.2020.1761237 ↗
58. The effect of different titanium and hydroxyapatite-coated dental implant surfaces on phenotypic expression of human bone-derived cell10.1002/jbm.a.30130 ↗
59. A simple method for decellularizing a cell-derived matrix for bone cell cultivation and differentiation10.1007/s10856-021-06601-y ↗
60. Birth and Death of Bone Cells: Basic Regulatory Mechanisms and Implications for the Pathogenesis and Treatment of Osteoporosis
61. Apoptosis and osteoporosis10.1016/S0002-9343(99)00420-9 ↗
62. Kowal, T.J., Hahn, N.C., Eider, S., Marzillier, J.Y., Fodera, D.M., Thamma, U., Jain, H., and Falk, M.M. (2018). New bioactive glass scaffolds with exceptional qualities for bone tissue regeneration: Response of osteoblasts and osteoclasts. Biomed. Mater., 13.10.1088/1748-605X/aa9385 ↗
63. Stimulating factors for regulation of osteogenic and chondrogenic differentiation of mesenchymal stem cells10.4252/wjsc.v15.i5.369 ↗