journal article·2023-10-09Open access

The Impact of Mechanical Debridement Techniques on Titanium Implant Surfaces: A Comparison of Sandblasted, Acid-Etched, and Femtosecond Laser-Treated Surfaces

Seung-Mo Eun, Keunbada Son, Sung-Min Hwang, Young-Tak Son, Yong-Gun Kim, Jo-Young Suh, Jun Ho Hwang, Sung-Min Kwon, Jong Hoon Lee, Hyun Deok Kim, Kyu-Bok Lee, Jae-Mok Lee

Journal of Functional Biomaterials· Volume 14· Issue 10

Abstract

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser. Disks of each surface-treated group were post-treated with mechanical debridement methods: Ti curettes, ultrasonic scaler, and Ti brushes. Scanning electron microscopy, Ra, and wettability were evaluated. Statistical analysis was performed using the Kruskal–Wallis H test, with post-hoc analyses conducted using the Bonferroni correction (α = 0.05). In the control group, no significant difference in Ra was observed between the machined and SLA groups. However, femtosecond laser-treated surfaces exhibited higher Ra than SLA surfaces (p < 0.05). The application of Ti curette or brushing further accentuated the roughness of the femtosecond laser-treated surfaces, whereas scaling reduced the Ra in SLA surfaces. Femtosecond laser-treated implant surfaces, with their unique roughness and compositional attributes, are promising alternatives in dental implant surface treatments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Periodontology, School of Dentistry, Kyungpook National University, Daegu 41940, Republic of Korea

Advanced Dental Device Development Institute (A3DI), Kyungpook National University, Daegu 41940, Republic of Korea

Department of Dental Science, Graduate School, Kyungpook National University, Daegu 41940, Republic of Korea

Institute of Advanced Convergence Technology, Kyungpook National University, Daegu 41061, Republic of Korea

School of Electronics Engineering, Kyungpook National University, Daegu 41566, Republic of Korea

Department of Prosthodontics, School of Dentistry, Kyungpook National University, Daegu 41940, Republic of Korea

Funding

National Research Foundation of Korea (NRF) grant funded by the Korean government · Bio Industry Technology Development Program of the Korea Evaluation Institute of Industrial Technology (KEIT) funded by the Ministry of Trade, Industry and Energy · Korea Institute for Advancement of Technology(KIAT) grant funded by the Ministry of Trade, Industry and Energy · National Research Foundation of Korea(NRF) grant funded by the Ministry of Educa-tion

References (50)

Show source-provided references
1. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗
2. Advancing dental implant surface technology; From micron- to nanotopography10.1016/j.biomaterials.2008.05.012 ↗
3. Organic-inorganic surface modifications for titanium implant surfaces10.1007/s11095-008-9617-0 ↗
4. Modified titanium surfaces promote accelerated osteogenic differentiation of mesenchymal stromal cells in vitro10.1016/j.bone.2009.03.662 ↗
5. Definition and prevalence of peri-implant diseases10.1111/j.1600-051X.2008.01274.x ↗
6. Re-osseointegration on previously contaminated surfaces: A systematic review10.1111/j.1600-0501.2009.01786.x ↗
7. Biofilm on dental implants: A review of the literature
8. The effects of polishing methods on surface morphology, roughness and bacterial colonisation of titanium abutments10.1007/s10856-007-0141-2 ↗
9. In vitro studies on the effect of cleaning methods on different implant surfaces10.1902/jop.1998.69.8.857 ↗
10. The effect of plaque control and surgical pocket elimination on the establishment and maintenance of periodontal health. A longitudinal study of periodontal therapy in case of advanced disease10.1111/j.1600-051X.1975.tb01727.x ↗
11. The role of dental plaque in gingivitis and Periodontitis10.1111/j.1600-051X.1988.tb01019.x ↗
12. Update on plaque and periodontal disease10.1111/j.1600-051X.1980.tb01968.x ↗
13. Materials characteristics of uncoated/ceramic-coated implant materials10.1177/08959374990130011001 ↗
14. Titanium as a reconstruction and implant material in dentistry: Advantages and pitfalls10.3390/ma5091528 ↗
15. Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion10.1016/j.colsurfa.2009.12.017 ↗
16. Effects of roughness pitch of surfaces on their wettability10.1007/s10853-005-1947-2 ↗
17. Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour10.1016/S0928-4931(03)00033-X ↗
18. Zirconium oxide coating improves implant osseointegration in vivo10.1016/j.dental.2007.06.003 ↗
19. Effect of various implant surface treatments on osseointegration—A literature review
20. Influence of implant surfaces on osseointegration10.1590/S0103-64402010000600001 ↗
21. Bernardi, S., Bianchi, S., Tomei, A.R., Continenza, M.A., and Macchiarelli, G. (2019). Microbiological and SEM-EDS Evaluation of Titanium Surfaces Exposed to Periodontal Gel: In Vitro Study. Materials, 12.10.3390/ma12091448 ↗
22. In vitro investigation of titanium and hydroxyapatite dental implant surfaces using a rat bone marrow stromal cell culture system10.1016/S0142-9612(02)00078-9 ↗
23. Does the coating of titanium implants by hydroxyapatite affect the elaboration of free radicals. An experimental study
24. Behavior of osteoblastic cells cultured on titanium and structured zirconia surfaces10.1186/1746-160X-4-29 ↗
25. Histologic comparison of a thermal dual-etched implant surface to machined, TPS, and HA surfaces: Bone contact in vivo in rabbits
26. Histologic and biomechanical evaluation of alumina-blasted/acid-etched and resorbable blasting media surfaces10.1563/AAID-JOI-D-10-00105 ↗
27. Influence of mechanical and chemical surface treatments on the formation of bone-like structure in cpTi for endosseous dental implants10.1016/j.apsusc.2012.07.033 ↗
28. The anatase phase of nanotopography titania plays an important role on osteoblast cell morphology and proliferation10.1007/s10856-008-3505-3 ↗
29. Titanium surface modified by hydroxyapatite coating for dental implants10.1016/j.surfcoat.2012.03.037 ↗
30. Bihn, S.K., Son, K., Son, Y.T., Dahal, R.H., Kim, S., Kim, J., and Lee, K.B. (2023). In Vitro Biofilm Formation on Zirconia Implant Surfaces Treated with Femtosecond and Nanosecond Lasers. J. Funct. Biomater., 14.10.3390/jfb14100486 ↗
31. A removal torque of the laser-treated titanium implants in rabbit tibia10.1016/S0142-9612(03)00377-6 ↗
32. Rough surfaces of titanium and titanium alloys for implants and prostheses10.1016/j.msec.2004.08.004 ↗
33. The effect of sand-blasting and hydrofluoric acid etching on Ti CP 2 and Ti CP 4 surface topography
34. Time-dependent morphology and adhesion of osteoblastic cells on titanium model surfaces featuring scale-resolved topography10.1016/j.biomaterials.2003.09.111 ↗
35. In vivo evaluation of plasma-sprayed titanium coating after alkali modification10.1016/j.biomaterials.2004.09.003 ↗
36. An in vivo study of bone response to implants topographically modified by laser micromachining10.1016/S0142-9612(02)00266-1 ↗
37. Early bone response to sandblasted, dual acid-etched and H2O2/HCl treated titanium implants: An experimental study in the rabbit10.1016/j.ijom.2009.03.716 ↗
38. Kim, H., Choi, S.-H., Ryu, J.-J., Koh, S.-Y., Park, J.-H., and Lee, I.-S. (2008). The biocompatibility of SLA-treated titanium implants. Biomed. Mater., 3.10.1088/1748-6041/3/2/025011 ↗
39. Surgical applications of femtosecond lasers10.1002/jbio.200910053 ↗
40. Niemz, M.H. (2004). Laser-Tissue Interactions: Fundamentals and Applications, Springer.
41. Fast fabrication of superhydrophobic titanium alloy as antibacterial surface using nanosecond laser texturing10.1115/1.4038093 ↗
42. Seo, B.Y., Son, K., Son, Y.T., Dahal, R.H., Kim, S., Kim, J.M., Hwang, J.H., Kwon, S.M., Lee, J.M., and Lee, K.B. (2023). Influence of Dental Titanium Implants with Different Surface Treatments Using Femtosecond and Nanosecond Lasers on Biofilm Formation. J. Funct. Biomater., 14.10.3390/jfb14060297 ↗
43. The use of reduced healing times on ITI® implants with a sandblasted and acid-etched (SLA) surface: Early results from clinical trials on ITI® SLA implants10.1034/j.1600-0501.2002.130204.x ↗
44. The effect of five mechanical instrumentation protocols on implant surface topography and roughness: A scanning electron microscope and confocal laser scanning microscope analysis10.1111/clr.13446 ↗
45. Kim, H.-K., Park, S.-Y., Son, K., Kim, Y.-G., Yu, W.-J., Lee, K.-B., and Lee, J.-M. (2020). Alterations in Surface Roughness and Chemical Characteristics of Sandblasted and Acid-Etched Titanium Implants after Irradiation with Different Diode Lasers. Appl. Sci., 10.10.3390/app10124167 ↗
46. The effect of different cleaning methods on the surface and temperature of failed titanium implants: An in vitro study10.1007/s10103-017-2149-2 ↗
47. On osseointegration in relation to implant surfaces10.1111/cid.12742 ↗
48. Early osseointegration driven by the surface chemistry and wettability of dental implants10.1590/1678-775720140483 ↗
49. Rational design and in vitro characterization of novel dental implant and abutment surfaces for balancing clinical and biological needs10.1111/cid.12736 ↗
50. Femtosecond laser structuring of titanium implants10.1016/j.apsusc.2007.03.006 ↗