journal article·2023-05-15Open access

Combined Porous-Monolithic TiNi Materials Surface-Modified with Electron Beam for New-Generation Rib Endoprostheses

Anastasiia Shabalina, Sergey Anikeev, Sergei Kulinich, Nadezhda Artyukhova, Vitaly Vlasov, Maria Kaftaranova, Valentina Hodorenko, Evgeny Yakovlev, Evgeny Pesterev, Anna Lukyanenko, Mikhail Volochaev, Sofiya Pakholkina, Oibek Mamazakirov, Victor Stolyarov, Anatolii Mokshin, Victor Gunther

Abstract

TiNi alloys are very widely used materials in implant fabrication. When applied in rib replacement, they are required to be manufactured as combined porous-monolithic structures, ideally with a thin, porous part well-adhered to its monolithic substrate. Additionally, good biocompatibility, high corrosion resistance and mechanical durability are also highly demanded. So far, all these parameters have not been achieved in one material, which is why an active search in the field is still underway. In the present study, we prepared new porous-monolithic TiNi materials by sintering a TiNi powder (0–100 µm) on monolithic TiNi plates, followed by surface modification with a high-current pulsed electron beam. The obtained materials were evaluated by a set of surface and phase analysis methods, after which their corrosion resistance and biocompatibility (hemolysis, cytotoxicity, and cell viability) were evaluated. Finally, cell growth tests were conducted. In comparison with flat TiNi monoliths, the newly developed materials were found to have better corrosion resistance, also demonstrating good biocompatibility and potential for cell growth on their surface. Thus, the newly developed porous-on-monolith TiNi materials with different surface porosity and morphology showed promise as potential new-generation implants for use in rib endoprostheses.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Medical Materials Science, Tomsk State University, 634050 Tomsk, Russia

Institute of Physics, Kazan Federal University, 420008 Kazan, Russia

Research Institute of Science and Technology, Tokai University, Hiratsuka 259-1292, Kanagawa, Japan

Research School of High-Energy Physics, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia

Tomsk Scientific Center, Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russia

Kirensky Institute of Physics, Federal Research Center, KSC Siberian Branch Russian Academy of Science, 660036 Krasnoyarsk, Russia

School of Engineering Physics and Radio Electronics, Siberian Federal University, 660041 Krasnoyarsk, Russia

Department of Morphology and Physiology of the Medical Institute, Surgut State University, 628403 Surgut, Russia

Funding

Russian Science Foundation

References (57)

Show source-provided references
1. Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi10.1063/1.1729603 ↗
2. Physical metallurgy of Ti-Ni based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
3. Otsuka, K., and Waymann, C.M. (1999). Ti-Ni shape memory alloys. Shape Memory Materials, Cambridge University Press.
4. Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: A review10.1016/j.pmatsci.2020.100739 ↗
5. Saber, O., Ansari, S.A., and Alshoaibi, A. (2020). Development of Ti/Ni nanolayered structures to be a new candidate for energy storage applications. Appl. Sci., 10.10.3390/app10196935 ↗
6. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
7. Carpegna, G., Alovisi, M., Paolino, D.S., Marchetti, A., Gibello, U., Scotti, N., Pasqualini, D., Scattina, A., Chiandussi, G., and Berutti, E. (2020). Evaluation of pressure distribution against root canal walls of NiTi rotary instruments by finite element analysis. Appl. Sci., 10.10.3390/app10082981 ↗
8. Sachdeva, R.C.L., and Miyazaki, S. (2001). Nitinol as a biomedical material. Encycl. Mater. Sci. Technol., 6155–6160.10.1016/B0-08-043152-6/01093-7 ↗
9. Brief overview on nitinol as biomaterial10.1155/2016/4173138 ↗
10. Dagna, A., Gastaldo, G., Beltrami, R., and Poggio, C. (2016). Debris evaluation after root canal shaping with rotating and reciprocating single-file systems. J. Funct. Biomater., 7.10.3390/jfb7040028 ↗
11. Cleaning effectiveness of three NiTi rotary instruments: A focus on biomaterial properties10.3390/jfb6010066 ↗
12. Stoeckel, D., Pelton, A., and Duerig, T. (2009). Self-expanding nitinol stents for the treatment of vascular disease. Shape Mem. Alloy. Biomed. Appl., 237–256.10.1533/9781845695248.2.237 ↗
13. Fatigue and durability of nitinol stents10.1016/j.jmbbm.2007.08.001 ↗
14. The consequences of the mechanical environment of peripheral arteries for NiTi stenting10.1007/s11517-011-0815-2 ↗
15. Fatigue behaviour of nitinol peripheral stents: The role of plaque shape studied with computational structural analyses10.1016/j.medengphy.2014.03.006 ↗
16. Hypersensitivity to orthopedic implants: A review of the literature10.1007/s40744-017-0062-6 ↗
17. Additive manufacturing of titanium alloys for orthopedic applications: A materials science viewpoint10.1002/adem.201800172 ↗
18. Anikeev, S.G., Kaftaranova, M.I., Hodorenko, V.N., Ivanov, S.D., Artyukhova, N.V., Shabalina, A.V., Kulinich, S.A., Slizovsky, G.V., Mokshin, A.V., and Gunther, V.E. (2023). TiNi-based material with shape-memory effect for surgical treatment of diseases of small intestine in newborn and young children. J. Funct. Biomater., 14.10.3390/jfb14030155 ↗
19. Surgical treatment of fractures of long tubular bones of elderly and old-aged people with the usage of shape memory implants10.18502/kms.v2i1.801 ↗
20. Current aspects in reconstructive surgery for nasal cavity and paranasal sinus cancer10.18502/kms.v2i1.815 ↗
21. A new method for non-invasive surgery in ophthalmology10.18502/kms.v2i1.805 ↗
22. The technology of the manufacturing thin wire of TiNi-based alloys by using infrared radiation10.18502/kms.v2i1.784 ↗
23. impressive strides in antibacterial performance amelioration of Ti-based implants via plasma electrolytic oxidation (PEO): A review of the recent advancements10.1016/j.cej.2022.136003 ↗
24. Jang, S.R., Suh, I.W., and Heng, L. (2023). Nanoscale polishing technique of biomedical grade NiTi wire by advanced maf process: Relationship between surface roughness and bacterial adhesion. J. Funct. Biomater., 14.10.3390/jfb14040177 ↗
25. The importance of antibacterial surfaces in biomedical applications10.1016/bs.abl.2018.05.001 ↗
26. Sysolyatin, P.G., Gunther, V.E., Sysolyatin, S.P., Mirgazizov, M.Z., Radkevich, A.A., Olesova, V.N., Khodorenko, V.N., Dyuryagin, N.M., Melnik, D.D., and Tazin, I.D. (2012). Medical materials with shape memory. Shape Memory Implants in Maxillofacial Surgery, NPP «MIC». [4th ed.]. (In Russian).
27. Dambaev, G.T., Topolnitsky, E.B., Gunter, V.E., Shefer, N.A., Khodorenko, V.N., Sokolovich, E.G., Fomina, T.I., Kapitanov, V.A., Zheravin, A.A., and Gunter, S.V. (2016). Shape Memory Implants in Thoracic Surgery, NPP «MIC». (In Russian).
28. Mirgazizov, M.Z., Gunter, V.E., Galonsky, V.G., Olesova, V.N., Radkevich, A.A., Khafizov, R.G., Mirgazizov, R.M., Yudin, P.S., Starosvetsky, S.I., and Zvigintsev, M.A. (2011). et al. Materials and Implants with Shape Memory in Dentistry, NPP «MIC». [5th ed.]. (In Russian).
29. Topolnitskiy, E., Chekalkin, T., Marchenko, E., Yasenchuk, Y., Kang, S.B., Kang, J.H., and Obrosov, A. (2021). Evaluation of clinical performance of TiNi-based implants used in chest wall repair after resection for malignant tumors. J. Funct. Biomater., 12.10.3390/jfb12040060 ↗
30. Repair of huge thoracic defect combined with hernia after multimodality treatment of breast cancer
31. Reconstruction of the chest wall using titanium nickelid for cancer patients
32. Choinzonov, E.L., Gunter, V.E., and Mukhamedov, M.R. (2012). Medical materials with shape memory. Shape Memory Implants in Oncology, NPP «MIC». [13th ed.]. (In Russian).
33. (2023, April 21). Scientific Electronic Library Elibrary.Ru. (In Russian).
34. Anikeev, S., Yakovlev, E., Artyukhova, N., Mamazakirov, O., Kaftaranova, M., and Promakhov, V. (2020, January 14–26). Production of two-dimensional porous TiNi-based powder material by diffusion sintering and electron-beam processing. Proceedings of the 7th International Congress on Energy Fluxes and Radiation Effects (EFRE), Tomsk, Russia.10.1109/EFRE47760.2020.9242094 ↗
35. The influence of electron-beam treatment on the structure of a TiNi powder alloy obtained by calcium-hydride reduction10.1134/S1027451021050244 ↗
36. Anikeev, S.G., Shabalina, A.V., Kulinich, S.A., Artyukhova, N.V., Korsakova, D.R., Yakovlev, E.V., Vlasov, V.A., Kokorev, O.V., and Hodorenko, V.N. (2021). Preparation and electron-beam surface modification of novel TiNi material for medical applications. Appl. Sci., 11.10.20944/preprints202104.0141.v1 ↗
37. Structural and morphological features of TiNi-based powder manufactured by the method of hybrid-calcium reduction10.1007/s11182-018-1456-9 ↗
38. Change in structure during consolidation of calcium hydride powders of TiNi intermetallic10.1007/s11015-015-0037-1 ↗
39. Powder titanium nickelide: Technology and properties10.1134/S0036029520110087 ↗
40. Ti-Ni powder structure after mechanical activation and interaction with hydrogen10.1007/s11182-019-01873-y ↗
41. Electrochemical hydrogenation of Ti–Ni powder mechanochemically alloyed with titanium10.1016/j.intermet.2022.107739 ↗
42. A PÈTM-CP facility for the surface alloying10.1134/S0020441211050149 ↗
43. Frolov, Y.G. (1988). Course of Colloidal Chemistry. Surface Phenomena and Disperse Systems: Chemistry, Metallyrgy. (In Russian).
44. Surface modification and alloying of aluminum and titanium alloys with low-energy, high-current electron beams10.1155/2011/673685 ↗
45. Effect of inclusions on cratering behavior in TiNi shape memory alloys irradiated with a low-energy, high-current electron beam10.1016/j.surfcoat.2016.06.036 ↗
46. Formation of microcraters and hierarchically-organized surface structures in TiNi shape memory alloy irradiated with a low-energy, high-current electron beam10.1063/1.4932835 ↗
47. Mechanisms of structural evolutions associated with the high current pulsed electron beam treatment of a NiTi shape memory alloy10.1116/1.2388951 ↗
48. Cross-sectional analysis of the graded microstructure and residual stress distribution in a TiNi alloy treated with low energy high-current pulsed electron beam10.1016/j.mtcomm.2018.08.018 ↗
49. Evolution of structural-phase states in TiNi surface layers synthesized by electron beam treatment10.1155/2010/605362 ↗
50. Interference in coagulation testing: Focus on spurious hemolysis, icterus, and lipemia
51. Management of hemolyzed specimens10.17116/labs20176238-46 ↗
52. Shayan, M., Jankowitz, B.T., Shridhar, P., and Chun, Y. (2016). Use of micropatterned thin film nitinol in carotid stents to augment embolic protection. J. Funct. Biomater., 7.10.20944/preprints201611.0004.v1 ↗
53. Different sensitivity of human endothelial cells, smooth muscle cells and fibroblasts to topography in the nano–Micro range10.1016/j.actbio.2009.04.003 ↗
54. Vandrangi, P., Gott, S.C., Kozaka, R., Rodgers, V.G.J., and Rao, M.P. (2014). Comparative endothelial cell response on topographically patterned titanium and silicon substrates with micrometer to sub-micrometer feature sizes. PLoS ONE, 9.10.1371/journal.pone.0111465 ↗
55. Directed 3D cell alignment and elongation in microengineered hydrogels10.1016/j.biomaterials.2010.05.056 ↗
56. Investigation of surface endothelialization on biomedical nitinol (NiTi) alloy: Effects of surface micropatterning combined with plasma nanocoatings10.1016/j.actbio.2009.05.021 ↗
57. Belkaid, W., Thostrup, P., Yam, P.T., Juzwik, C.A., Ruthazer, E.S., Dhaunchak, A.S., and Colman, D.R. (2013). Cellular response to micropatterned growth promoting and inhibitory substrates. BMC Biotechnol., 13.10.1186/1472-6750-13-86 ↗